Wraps by car

Ford Aspire wrap

The Ford Aspire wrap page covers the first generation, produced from 1993 to 1997. A full vinyl wrap of the newest body takes about 46 ft (14 m) of 60-inch (1.52 m) cast film. Chrome or patterned film needs about 56 ft (17 m) for the same car.

1generations14 mof film for a full wrap

Ford Aspire, first generation, factory photo
Ford Aspire, first generation. Factory color shown.

Ford Aspire wrap colors and ideas

  • Aspire black wrap
  • Aspire white wrap
  • Aspire gray wrap
  • Aspire silver wrap
  • Aspire red wrap
  • Aspire blue wrap
  • Aspire green wrap
  • Aspire yellow wrap
  • Aspire orange wrap
  • Aspire purple wrap
  • Aspire pink wrap
  • Aspire teal wrap
  • Aspire brown wrap
  • Aspire gold wrap
  • Aspire chrome wrap
  • Aspire color shift wrap
  • Aspire carbon fiber wrap
  • Aspire camo and patterned wrap

How much vinyl to wrap a Ford Aspire

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1993–1997hatchback (3 or 5 doors)152.8 in (3,881 mm) to 174.8 in (4,440 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)

Aspire wrap cost factors

Aspire wrap cost depends on the amount of film, the film type, and the work needed. A full wrap of the newest body takes about 46 ft (14 m) of 60-inch (1.52 m) cast film, or about 56 ft (17 m) of chrome or patterned film. The wrap cost also changes with the condition of the paint and the number of cut-outs on the tailgate. A smaller job like a hood or roof wrap uses less film and costs less to apply.

  • Film for a full wrap: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).
  • Body: hatchback (3 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Aspire wraps by generation

Swipe sideways. Tap a card for the full description.

Ford Aspire, first generation, factory photo
Factory color shown

1993–1997 Aspire hatchback (first generation)

1993–1997hatchback (3 or 5 doors)152.8 in (3,881 mm) to 174.8 in (4,440 mm)

The first generation Ford Aspire was built from 1993 to 1997 as a hatchback with three or five doors. On a car of these years, panels may be original or repainted, so a test spot comes before a full wrap. A test spot shows whether the film will stick well to the old paint. The tailgate with the rear glass in it needs careful cutting around the glass edge.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Roof, hood, chrome delete and PPF on an Aspire

A partial wrap on an Aspire can cover the roof, hood, or mirror caps. Aspire chrome delete covers window trim and badges with black film. Paint protection film (PPF) on the front end protects the hood and bumper from stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Ford Aspire: body, cut-outs and film

The Ford Aspire vinyl wrap is sized for a subcompact hatchback with three or five doors. Body length ranges from 152.8 in (3,881 mm) to 174.8 in (4,440 mm), so the amount of film changes with the version. The hatchback shape has a tailgate with the rear glass in it, so the film ends at the edge of the glass. Fewer doors and a shorter roof mean slightly less material, while five-door bodies need more for the extra pillars.

Aspire wrap ideas include the tailgate as the main cut-out point on the rear. The rear glass sits inside the tailgate, so the film stops at the edge of the glass. You may also want to remove or mask badges, handles, and trim pieces before wrapping. A chrome delete on the window trim and badges can be done with the same film.

How much vinyl to wrap an Aspire depends on the body length and the number of doors. The first generation is the only one in this catalog, so there is no difference between generations for film amounts. The estimate of 46 ft (14 m) of 60-inch (1.52 m) cast film covers a full wrap of the newest body. Add about 10 ft (3 m) when you use chrome or patterned film.

Questions about wrapping a Ford Aspire

How much vinyl does it take to wrap a Ford Aspire?

A Ford Aspire wrap takes about 46 ft (14 m) of 60-inch (1.52 m) cast film for the newest body. With chrome or patterned film, plan for about 56 ft (17 m) because the pattern must be matched.

Can I wrap only the hood or the roof of an Aspire?

Yes, you can wrap only the hood or the roof of an Aspire. A partial wrap on the roof, hood, or mirror caps is a smaller job than a full wrap and uses less film.

Is an Aspire hard to wrap?

An Aspire is not hard to wrap, but the tailgate with the rear glass in it adds work. The film must end at the edge of the glass, so the installer cuts carefully around it. The short length of 152.8 in (3,881 mm) to 174.8 in (4,440 mm) also means fewer panels to cover.

How many generations of the Aspire does this page cover?

This page covers one generation of the Ford Aspire. The first generation was produced from 1993 to 1997.