Wraps by car

Ford B-MAX wrap

A Ford B-MAX wrap changes the look of this compact minivan with a single generation produced from 2012 to 2018. A full wrap of the newest body takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. The B-MAX is a five-door van with sliding side doors. This page covers vinyl wrap coverage, wrap ideas, and the work involved.

1generations18.5 mof film for a full wrap

Ford B-MAX, first generation, factory photo
Ford B-MAX, first generation. Factory color shown.

Ford B-MAX wrap colors and ideas

  • B-MAX black wrap
  • B-MAX white wrap
  • B-MAX gray wrap
  • B-MAX silver wrap
  • B-MAX red wrap
  • B-MAX blue wrap
  • B-MAX green wrap
  • B-MAX yellow wrap
  • B-MAX orange wrap
  • B-MAX purple wrap
  • B-MAX pink wrap
  • B-MAX teal wrap
  • B-MAX brown wrap
  • B-MAX gold wrap
  • B-MAX chrome wrap
  • B-MAX color shift wrap
  • B-MAX carbon fiber wrap
  • B-MAX camo and patterned wrap

How much vinyl to wrap a Ford B-MAX

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2012–2018van (5 doors)160.5 in (4,077 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)

B-MAX wrap cost factors

B-MAX wrap cost depends on the size of the job and the film finish you choose. A full wrap of this 160.5 in (4,077 mm) van uses about 61 ft (18.5 m) of 60-inch (1.52 m) cast film, which sets the baseline for materials. Chrome or patterned film raises the amount to about 69 ft (21 m) because of pattern matching. The sliding door tracks add labor for careful cutting, and partial jobs use less film.

  • Film for a full wrap: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.

B-MAX wraps by generation

Swipe sideways. Tap a card for the full description.

Ford B-MAX, first generation, factory photo
Factory color shown

2012–2018 B-MAX van (first generation)

2012–2018van (5 doors)160.5 in (4,077 mm)

The first generation B-MAX built from 2012 to 2018 has sliding side doors where the tracks stay bare and decide where the film is cut. The five-door van body measures 160.5 in (4,077 mm) long. A full wrap takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film, with chrome or patterned film needing about 69 ft (21 m).

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Roof, hood, chrome delete and PPF on a B-MAX

A partial wrap on a B-MAX can cover the roof, hood, or mirror caps instead of the whole van. Chrome delete on the window trim and badges is another smaller job. Paint protection film (PPF) as a clear layer on the front end is also offered. Each option uses less film than a full wrap and leaves the sliding door areas untouched unless you want them included.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Ford B-MAX: body, cut-outs and film

The Ford B-MAX vinyl wrap is shaped by the van's five-door layout and its 160.5 in (4,077 mm) length. The tall, boxy body panels are straightforward to cover, but the sliding doors add extra cutting and fitting. The small overall size keeps the film total moderate compared with larger vans. Installers plan the film so the sliding door tracks stay clear.

B-MAX wrap ideas must work around the sliding side doors, because the door tracks stay bare and the film is cut along them. The roof, hood, and rear hatch are simple large panels for a color change wrap. Mirror caps and window trim are common areas for chrome delete with black film. Clear paint protection film (PPF) suits the front bumper and hood.

To know how much vinyl to wrap a B-MAX, compare the single generation built from 2012 to 2018. Film estimates do not change between model years for this van. The length of 160.5 in (4,077 mm) and the five-door body stay the same throughout production. A full wrap uses about 61 ft (18.5 m) of 60-inch (1.52 m) cast film.

Questions about wrapping a Ford B-MAX

How much vinyl does it take to wrap a Ford B-MAX?

About 61 ft (18.5 m) of 60-inch (1.52 m) cast film is needed to wrap a Ford B-MAX. That figure covers the newest body of the only generation, produced from 2012 to 2018. If you choose chrome or patterned film, plan for about 69 ft (21 m) to match patterns across the van.

Are the sliding doors of a B-MAX wrapped?

The sliding doors of a B-MAX are wrapped on their large outer panels, but the tracks stay bare. The film is cut along the door tracks so the doors can still slide without catching. This is a standard part of the wrap process for this van.

Can I wrap only the hood or the roof of a B-MAX?

Yes, you can wrap only the hood or the roof of a B-MAX. Partial wrap jobs on this van include the roof, hood, and mirror caps. Chrome delete on window trim and badges or clear paint protection film on the front end are other smaller options.

Is a B-MAX hard to wrap?

A B-MAX is moderately hard to wrap because of its sliding side doors. The door tracks stay bare and decide where the film is cut, which adds precise trimming work. The van's 160.5 in (4,077 mm) length and upright panels make the rest of the job straightforward for an experienced installer.