Wraps by car

Ford Bronco wrap

The Ford Bronco wrap page covers all six generations of the SUV, from the second generation to the current model. A full wrap of the newest sixth generation body takes about 74 ft (22.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film on that body needs about 82 ft (25 m).

6generations22.5 mof film for a full wrap

Ford Bronco, sixth generation, factory photo
Ford Bronco, sixth generation. Factory color shown.

Ford Bronco wrap colors and ideas

  • Bronco black wrap
  • Bronco white wrap
  • Bronco gray wrap
  • Bronco silver wrap
  • Bronco red wrap
  • Bronco blue wrap
  • Bronco green wrap
  • Bronco yellow wrap
  • Bronco orange wrap
  • Bronco purple wrap
  • Bronco pink wrap
  • Bronco teal wrap
  • Bronco brown wrap
  • Bronco gold wrap
  • Bronco chrome wrap
  • Bronco color shift wrap
  • Bronco carbon fiber wrap
  • Bronco camo and patterned wrap

How much vinyl to wrap a Ford Bronco

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2020–nowSUV (3 or 5 doors)173.7 in (4,412 mm) to 189.5 in (4,813 mm)about 74 ft (22.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m)
1992–1996SUV (3 doors)183.6 in (4,663 mm)about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m)
1987–1991SUV (3 doors)151.5 in (3,848 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)
1980–1986SUV (3 doors)180.4 in (4,582 mm)about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m)
1978–1979SUV (3 doors)165.4 in (4,200 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m)
1966–1977SUV, convertible, pickup (3 doors)151.5 in (3,848 mm)about 49 ft (15 m) for the convertible to 54 ft (16.5 m) for the pickup, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 61 ft (18.5 m)

Bronco wrap cost factors

Bronco wrap cost depends on the size of the body and the amount of film it needs. The sixth generation uses about 74 ft (22.5 m) of 60-inch film, while the fourth generation uses only 52 ft (16 m). More film means more material, and the tall body means more labor time on a platform. Cut-outs around sensors, cameras, and fog lamps also add to the work.

  • Film for a full wrap: about 74 ft (22.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m).
  • Body: SUV (3 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have a styling kit on the bumpers and sills: more separate pieces to wrap.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.
  • A tall body (78.7 in (1,999 mm)): the roof is wrapped from a platform.

Bronco wraps by generation

Swipe sideways. Tap a card for the full description.

Ford Bronco, sixth generation, factory photo
Factory color shown

2020–now Bronco SUV (sixth generation)

2020–nowSUV (3 or 5 doors)173.7 in (4,412 mm) to 189.5 in (4,813 mm)

The sixth generation Ford Bronco has a tall body that is 78.7 in (1,999 mm) high, so the roof is wrapped from a platform and takes more time. This generation is offered as a 3-door or 5-door SUV, with the longer 5-door needing more film. Some trims have a styling kit on the bumpers and sills that creates more separate pieces to wrap.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a styling kit on the bumpers and sills: more separate pieces to wrap.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

A tall body (78.7 in (1,999 mm)): the roof is wrapped from a platform.

Film: about 74 ft (22.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m).

Ford Bronco, fifth generation, factory photo
Factory color shown

1992–1996 Bronco SUV (fifth generation)

1992–1996SUV (3 doors)183.6 in (4,663 mm)

Paint age matters on a fifth generation Ford Bronco from 1992–1996. Panels may be original or repainted, and a test spot comes before a full wrap to check paint condition. This generation is a 3-door SUV with a length of 183.6 in (4,663 mm) and two long side doors, each wrapped as one large piece.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

A tall body (74.5 in (1,892 mm)): the roof is wrapped from a platform.

Film: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m).

Ford Bronco, fourth generation, factory photo
Factory color shown

1987–1991 Bronco SUV (fourth generation)

1987–1991SUV (3 doors)151.5 in (3,848 mm)

The fourth generation Ford Bronco is the shortest in the catalog at 151.5 in (3,848 mm), so it needs less film than the others. Its 3-door SUV body has two long doors and a tailgate with glass in it. A full wrap takes about 52 ft (16 m) of cast film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

A tall body (71.6 in (1,819 mm)): the roof is wrapped from a platform.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Ford Bronco, third generation, factory photo
Factory color shown

1980–1986 Bronco SUV (third generation)

1980–1986SUV (3 doors)180.4 in (4,582 mm)

The third generation Ford Bronco is a 3-door SUV with a length of 180.4 in (4,582 mm), so it needs about 64 ft (19.5 m) of cast film. Its two long side doors are each one large piece, and the tailgate has rear glass in it. The body is 75.5 in (1,918 mm) tall, so the roof is wrapped from a platform.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

A tall body (75.5 in (1,918 mm)): the roof is wrapped from a platform.

Film: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m).

Ford Bronco, second generation, factory photo
Factory color shown

1978–1979 Bronco SUV (second generation)

1978–1979SUV (3 doors)165.4 in (4,200 mm)

The second generation Ford Bronco is a 3-door SUV with a length of 165.4 in (4,200 mm), taking about 59 ft (18 m) of cast film. Like the other early generations, it has two long side doors and a tailgate with rear glass in it. Its roof is wrapped from a platform because the body is 73.9 in (1,878 mm) tall.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

A tall body (73.9 in (1,878 mm)): the roof is wrapped from a platform.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).

Ford Bronco, first generation, factory photo
Factory color shown

1966–1977 Bronco SUV, convertible, pickup (first generation)

1966–1977SUV, convertible, pickup (3 doors)151.5 in (3,848 mm)

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.

Two long side doors: each door is one large piece of film.

A tall body (71.6 in (1,819 mm)): the roof is wrapped from a platform.

Film: about 49 ft (15 m) for the convertible to 54 ft (16.5 m) for the pickup, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 61 ft (18.5 m).

Roof, hood, chrome delete and PPF on a Bronco

Partial wrap on a Ford Bronco often covers the roof, hood, and mirror caps while leaving the rest of the paint visible. Bronco chrome delete wraps the window trim and badges with black film for a monochrome look. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Ford Bronco: body, cut-outs and film

The Ford Bronco vinyl wrap is shaped by the SUV's body styles and sizes. The newest Bronco comes as a 3-door or 5-door SUV with lengths from 173.7 in (4,412 mm) to 189.5 in (4,813 mm), which changes the amount of film. Earlier generations are 3-door SUVs with shorter or similar lengths. The tall body means the roof is always wrapped from a platform.

Bronco wrap ideas start with the parts that need cut-outs or come off. Every trim has parking sensors in the bumpers and cameras in the body, so the film is cut around each sensor and lens. Some trims have fog lamps in the front bumper and a styling kit on the bumpers and sills, adding more separate pieces. All generations have a tailgate with the rear glass in it, and the film ends at the edge of the glass.

How much vinyl to wrap a Bronco depends on the generation and body size. The sixth generation needs about 74 ft (22.5 m) of cast film, while the fourth generation needs about 52 ft (16 m). Fifth and third generations are close at about 64 ft (19.5 m), and the second generation takes about 59 ft (18 m). Chrome or patterned film adds roughly ten percent to each figure.

Questions about wrapping a Ford Bronco

How much vinyl does it take to wrap a Ford Bronco?

A full wrap of the newest Ford Bronco takes about 74 ft (22.5 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, plan about 82 ft (25 m). These figures cover the sixth generation body with a 3-door or 5-door layout.

Can I wrap only the hood or the roof of a Bronco?

Yes, you can wrap only the hood or the roof of a Bronco. Partial wrap often covers the roof, hood, and mirror caps as separate jobs. Chrome delete on the window trim and badges is another smaller option.

Is a Bronco hard to wrap?

A Bronco is not especially hard to wrap, but the tall body adds work because the roof must be wrapped from a platform. Every trim has parking sensors and cameras that require cut-outs in the film. Some trims have fog lamps and a styling kit that create more edges to wrap.

How many generations of the Bronco does this page cover?

This page covers six generations of the Ford Bronco. They range from the second generation (1978–1979) to the sixth generation (2020–now), including the third, fourth, and fifth generations.