Wraps by car

Ford Capri wrap

The Ford Capri wrap page covers all four generations of the Ford Capri, from the 1969 coupe to the 2024 electric SUV. A vinyl wrap on the current fourth-generation body takes about 46 ft (14 m) of 60-inch (1.52 m) cast film. The page gives body details, film estimates and the jobs a wrap shop can do on this car.

4generations

Ford Capri, fourth generation, factory photo
Ford Capri, fourth generation. Factory color shown.

Ford Capri wrap colors and ideas

  • Capri black wrap
  • Capri white wrap
  • Capri gray wrap
  • Capri silver wrap
  • Capri red wrap
  • Capri blue wrap
  • Capri green wrap
  • Capri yellow wrap
  • Capri orange wrap
  • Capri purple wrap
  • Capri pink wrap
  • Capri teal wrap
  • Capri brown wrap
  • Capri gold wrap
  • Capri chrome wrap
  • Capri color shift wrap
  • Capri carbon fiber wrap
  • Capri camo and patterned wrap

How much vinyl to wrap a Ford Capri

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2024–nowSUV (5 doors)——
1978–1987coupe (2 doors)167.8 in (4,262 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m)
1974–1977coupe (2 doors)168.5 in (4,280 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m)
1969–1974coupe (2 doors)167.8 in (4,262 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m)

Capri wrap cost factors

Capri wrap cost follows the amount of film, the body style and the condition of the paint. The coupes take about 46 ft (14 m) of 60-inch (1.52 m) film, and chrome or patterned film adds about 5–6 ft (1.5–2 m). The SUV adds the tailgate and charge port door as separate pieces, and any paint repair before the wrap adds labor.

  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Electric car: the charge port door is wrapped as a small piece of its own.

Capri wraps by generation

Swipe sideways. Tap a card for the full description.

Ford Capri, fourth generation, factory photo
Factory color shown

2024–now Capri SUV (fourth generation)

2024–nowSUV (5 doors)

The fourth-generation Ford Capri is a five-door electric SUV, and its body style affects the film layout. The tailgate includes the rear glass, so the film must end at the glass edge. The charge port door is wrapped as a small piece of its own, which adds a separate cut and seam.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Electric car: the charge port door is wrapped as a small piece of its own.

Ford Capri, third generation, factory photo
Factory color shown

1978–1987 Capri coupe (third generation)

1978–1987coupe (2 doors)167.8 in (4,262 mm)

The third-generation Ford Capri is a coupe built from 1978 to 1987, and paint age matters before a wrap. The two long side doors mean each door is one large piece of film, which needs a clean, smooth surface. A test spot on the panel checks whether old paint will hold the vinyl, especially if the car has been repainted.

Two long side doors: each door is one large piece of film.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).

Ford Capri, second generation, factory photo
Factory color shown

1974–1977 Capri coupe (second generation)

1974–1977coupe (2 doors)168.5 in (4,280 mm)

The second-generation Ford Capri is a two-door coupe, and its size sets the film amount. The body is 168.5 in (4,280 mm) long, and a full wrap takes about 46 ft (14 m) of 60-inch (1.52 m) cast film. The two long side doors are wrapped as one large piece each, which keeps the sides nearly seamless.

Two long side doors: each door is one large piece of film.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m).

Ford Capri, first generation, factory photo
Factory color shown

1969–1974 Capri coupe (first generation)

1969–1974coupe (2 doors)167.8 in (4,262 mm)

The first-generation Ford Capri is a two-door coupe, and its body size matches the later coupes. The length is 167.8 in (4,262 mm), and a full wrap takes about 46 ft (14 m) of 60-inch (1.52 m) cast film. Each long side door is one large piece of film, so the wrap needs careful handling on those big panels.

Two long side doors: each door is one large piece of film.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m).

Roof, hood, chrome delete and PPF on a Capri

A partial wrap on a Ford Capri can cover the roof, hood or mirror caps without a full color change. Capri chrome delete covers the window trim and badges, and black film is used to cover the bright trim. Paint protection film (PPF) is applied as clear film on the front end to guard against stone chips. These jobs use less film than a full wrap and still change the look or protect the paint.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Ford Capri: body, cut-outs and film

A Ford Capri vinyl wrap follows the body styles of each generation: a long two-door coupe or a five-door electric SUV. The coupe bodies measure 167.8 in (4,262 mm) or 168.5 in (4,280 mm), and the SUV is a mid-size with a tailgate. More body area means more film, and the SUV adds a charge port door as a separate small piece.

Capri wrap ideas start with the parts that need cut-outs or come off the car. The rear glass sits inside the tailgate on the SUV, so the film ends at the edge of the glass. The coupe generations have two long side doors, and each door is wrapped as one large piece. Handles, mirrors and badges are removed to keep the edges clean.

How much vinyl to wrap a Capri depends on the generation, and the coupes are close in size. The first-generation coupe is 167.8 in (4,262 mm) long and takes about 46 ft (14 m) of cast film. The second-generation coupe is 168.5 in (4,280 mm) long and takes the same 46 ft (14 m), but patterned film needs about 51 ft (15.5 m). The fourth-generation SUV is plotted on its own body data.

Questions about wrapping a Ford Capri

How much vinyl does it take to wrap a Ford Capri?

A full wrap on the fourth-generation Ford Capri takes about 46 ft (14 m) of 60-inch (1.52 m) cast film. The figure is the estimate for the current SUV body, and patterned or chrome film would need more. Older coupe generations are similar in size, at 167.8–168.5 in (4,262–4,280 mm) long.

Can I wrap only the hood or the roof of a Capri?

Yes, you can wrap only the hood or the roof of a Capri. A partial wrap covers the roof, hood or mirror caps, and a chrome delete covers only the window trim and badges. Paint protection film is also a partial option for the front end.

Is a Capri hard to wrap?

A Capri is not hard to wrap, but some parts add work. The SUV has a tailgate with the rear glass in it, so the film ends at the glass edge, and the charge port door is a separate piece. The coupes have two long side doors, and each door is one large piece of film that needs careful squeegeeing.

How many generations of the Capri does this page cover?

This page covers four generations of the Ford Capri. The generations are the fourth-generation SUV from 2024, the third-generation coupe from 1978–1987, the second-generation coupe from 1974–1977 and the first-generation coupe from 1969–1974.