Wraps by car

Ford Crown Victoria wrap

A Ford Crown Victoria wrap protects the paint and changes the look of this full-size sedan. The catalog covers two generations of the Crown Victoria. A full wrap of the newest body takes about 66 ft (20 m) of 60-inch (1.52 m) cast film.

2generations20 mof film for a full wrap

Ford Crown Victoria, second generation, factory photo
Ford Crown Victoria, second generation. Factory color shown.

Ford Crown Victoria wrap colors and ideas

  • Crown Victoria black wrap
  • Crown Victoria white wrap
  • Crown Victoria gray wrap
  • Crown Victoria silver wrap
  • Crown Victoria red wrap
  • Crown Victoria blue wrap
  • Crown Victoria green wrap
  • Crown Victoria yellow wrap
  • Crown Victoria orange wrap
  • Crown Victoria purple wrap
  • Crown Victoria pink wrap
  • Crown Victoria teal wrap
  • Crown Victoria brown wrap
  • Crown Victoria gold wrap
  • Crown Victoria chrome wrap
  • Crown Victoria color shift wrap
  • Crown Victoria carbon fiber wrap
  • Crown Victoria camo and patterned wrap

How much vinyl to wrap a Ford Crown Victoria

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1997–2011sedan (4 doors)212.0 in (5,385 mm)about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 77 ft (23.5 m)
1992–1997sedan (4 doors)212.5 in (5,397 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m)

Crown Victoria wrap cost factors

A Crown Victoria wrap cost depends on the film area, the film type, and the labor for this large sedan. The second-generation body needs about 66 ft (20 m) of cast film. Chrome or patterned film raises the amount to about 77 ft (23.5 m). The first generation needs about 59 ft (18 m) of standard film.

  • Film for a full wrap: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 77 ft (23.5 m).
  • Body: sedan (4 doors).

Crown Victoria wraps by generation

Swipe sideways. Tap a card for the full description.

Ford Crown Victoria, second generation, factory photo
Factory color shown

1997–2011 Crown Victoria sedan (second generation)

1997–2011sedan (4 doors)212.0 in (5,385 mm)

On a second-generation Crown Victoria from 1997–2011, the paint may be original or repainted. A test spot on each panel shows whether the film will lift old paint. A full wrap of this body takes about 66 ft (20 m) of 60-inch (1.52 m) cast film.

Film: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 77 ft (23.5 m).

Ford Crown Victoria, first generation, factory photo
Factory color shown

1992–1997 Crown Victoria sedan (first generation)

1992–1997sedan (4 doors)212.5 in (5,397 mm)

The first-generation Crown Victoria from 1992–1997 is a four-door sedan measuring 212.5 in (5,397 mm). Each side has two large doors and a long rear quarter panel. A full wrap uses about 59 ft (18 m) of 60-inch (1.52 m) cast film.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m).

Roof, hood, chrome delete and PPF on a Crown Victoria

A partial wrap on a Crown Victoria can cover the roof, hood, or mirror caps in a contrasting color. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) can be applied as a clear film on the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Ford Crown Victoria: body, cut-outs and film

A Ford Crown Victoria vinyl wrap covers a sedan body with four doors and a length of 212.0 in (5,385 mm) for the second generation. The first generation is slightly longer at 212.5 in (5,397 mm). The large panels and long roof mean you need more film than for a compact car.

Crown Victoria wrap ideas include covering the roof, hood, and trunk with a contrasting color. The door handles, mirrors, and antenna usually come off for a clean install. Cut-outs are needed for the lights, badges, and door edges.

To figure how much vinyl to wrap a Crown Victoria, check the generation. A second-generation car from 1997–2011 uses about 66 ft (20 m) of film. A first-generation car from 1992–1997 uses about 59 ft (18 m). The extra length of the newer body comes from its trim and bumper details.

Questions about wrapping a Ford Crown Victoria

How much vinyl does it take to wrap a Ford Crown Victoria?

It takes about 66 ft (20 m) of 60-inch (1.52 m) cast film to wrap a Ford Crown Victoria. That figure is for the second-generation body from 1997–2011 with standard film.

Can I wrap only the hood or the roof of a Crown Victoria?

Yes, you can wrap only the hood or the roof of a Crown Victoria. A partial wrap can cover the roof, hood, or mirror caps without doing the whole car.

Is a Crown Victoria hard to wrap?

A Crown Victoria is not hard to wrap for an experienced installer, but its size adds work. The long roof, large doors, and deep bumpers need careful stretching and trimming.

How many generations of the Crown Victoria does this page cover?

This page covers two generations of the Ford Crown Victoria. The first generation ran from 1992–1997 and the second generation from 1997–2011.