Wraps by car

Ford Edge Plus wrap

This page covers the Ford Edge Plus wrap, a vinyl wrap for one generation of the SUV. The first generation ran from 2019 to 2023 and is the only one in the catalog. A full wrap of the newest body takes about 66 ft (20 m) of 60-inch (1.52 m) cast film. Chrome or patterned film needs about 76 ft (23 m).

1generations20 mof film for a full wrap

Ford Edge Plus, first generation, factory photo
Ford Edge Plus, first generation. Factory color shown.

Ford Edge Plus wrap colors and ideas

  • Edge Plus black wrap
  • Edge Plus white wrap
  • Edge Plus gray wrap
  • Edge Plus silver wrap
  • Edge Plus red wrap
  • Edge Plus blue wrap
  • Edge Plus green wrap
  • Edge Plus yellow wrap
  • Edge Plus orange wrap
  • Edge Plus purple wrap
  • Edge Plus pink wrap
  • Edge Plus teal wrap
  • Edge Plus brown wrap
  • Edge Plus gold wrap
  • Edge Plus chrome wrap
  • Edge Plus color shift wrap
  • Edge Plus carbon fiber wrap
  • Edge Plus camo and patterned wrap

How much vinyl to wrap a Ford Edge Plus

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2019–2023SUV (5 doors)192.0 in (4,878 mm)about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m)

Edge Plus wrap cost factors

An Edge Plus wrap cost depends on the film width and the total area of this 192.0 in (4,878 mm) SUV. A full wrap takes about 66 ft (20 m) of 60-inch (1.52 m) cast film, and metallic or patterned film adds about 10 ft (3 m). The tailgate with the rear glass in it adds a careful cut, and the number of panels drives the labour. More cut-outs and removed parts also add to the final bill.

  • Film for a full wrap: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Edge Plus wraps by generation

Swipe sideways. Tap a card for the full description.

Ford Edge Plus, first generation, factory photo
Factory color shown

2019–2023 Edge Plus SUV (first generation)

2019–2023SUV (5 doors)192.0 in (4,878 mm)

The first generation Edge Plus runs from 2019 to 2023 and is the only body in this catalog. It is an SUV with five doors and a length of 192.0 in (4,878 mm), so the panels are larger than a compact car. The film estimate is about 66 ft (20 m) of 60-inch (1.52 m) cast film for the body. The tailgate with the rear glass in it means the film ends at the edge of the glass.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).

Roof, hood, chrome delete and PPF on an Edge Plus

A partial wrap on an Edge Plus can cover the roof, hood or mirror caps instead of the whole body. Edge Plus chrome delete turns the window trim and badges black with film. Paint protection film (PPF) is a clear film on the front end of this Edge Plus. These smaller jobs use less film and leave the rest of the paint visible.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Ford Edge Plus: body, cut-outs and film

A Ford Edge Plus vinyl wrap is planned around the SUV body with five doors and a length of 192.0 in (4,878 mm). The tall sides and large panels add up to a bigger film bill than an average sedan. The film estimate allows for the full body and a tailgate with the rear glass in it. You wrap up to the edge of that glass and stop there.

Edge Plus wrap ideas start with the tailgate, because the rear glass is set into it. The film ends at the edge of the glass, so the installer cuts that line carefully. Door handles, mirrors and the roof rails are the parts that come off for a clean install. You can also plan cut-outs for sensors and the front camera.

If you count how much vinyl to wrap an Edge Plus, the number stays the same for this car. There is only one generation in the catalog, so the body length and panel sizes do not change. The 2019 to 2023 Edge Plus has one body style in this data. Your film order is the same for any year of this generation.

Questions about wrapping a Ford Edge Plus

How much vinyl does it take to wrap a Ford Edge Plus?

It takes about 66 ft (20 m) of 60-inch (1.52 m) cast film to wrap a Ford Edge Plus. That figure covers the full body of the newest generation in this catalog. For chrome or patterned film the estimate is about 76 ft (23 m).

Can I wrap only the hood or the roof of an Edge Plus?

Yes, you can wrap only the hood or the roof of an Edge Plus. A partial wrap on this model typically covers the roof, hood or mirror caps. Chrome delete on the window trim and badges is another smaller job. Paint protection film (PPF) on the front end is also an option.

Is an Edge Plus hard to wrap?

An Edge Plus is not the easiest wrap because of the tailgate with the rear glass in it. The film ends at the edge of the glass, so the installer has to cut that line accurately. The 192.0 in (4,878 mm) length also means large side panels and more film to handle.

How many generations of the Edge Plus does this page cover?

This page covers one generation of the Edge Plus. The first generation, from 2019 to 2023, is the only one in the catalog. The film estimate is based on that body.