Wraps by car

Ford Excursion wrap

The Ford Excursion wrap page covers the full-size SUV built from 1999 to 2004. Ford made one generation of the Excursion. A full vinyl wrap of the newest body takes about 84 ft (25.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film needs about 95 ft (29 m).

1generations25.5 mof film for a full wrap

Ford Excursion, first generation, factory photo
Ford Excursion, first generation. Factory color shown.

Ford Excursion wrap colors and ideas

  • Excursion black wrap
  • Excursion white wrap
  • Excursion gray wrap
  • Excursion silver wrap
  • Excursion red wrap
  • Excursion blue wrap
  • Excursion green wrap
  • Excursion yellow wrap
  • Excursion orange wrap
  • Excursion purple wrap
  • Excursion pink wrap
  • Excursion teal wrap
  • Excursion brown wrap
  • Excursion gold wrap
  • Excursion chrome wrap
  • Excursion color shift wrap
  • Excursion carbon fiber wrap
  • Excursion camo and patterned wrap

How much vinyl to wrap a Ford Excursion

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1999–2004SUV (5 doors)226.7 in (5,758 mm)about 84 ft (25.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 95 ft (29 m)

Excursion wrap cost factors

Excursion wrap cost depends on the size of the vehicle and the film chosen. The long body and tall sides take more time to wrap. The roof needs a platform, which adds labor. Film choice also changes the total.

  • Film for a full wrap: about 84 ft (25.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 95 ft (29 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • A tall body (77.2 in (1,961 mm)): the roof is wrapped from a platform.

Excursion wraps by generation

Swipe sideways. Tap a card for the full description.

Ford Excursion, first generation, factory photo
Factory color shown

1999–2004 Excursion SUV (first generation)

1999–2004SUV (5 doors)226.7 in (5,758 mm)

The first generation Excursion runs from 1999 to 2004. Its height, 77.2 in (1,961 mm), means the roof is wrapped from a platform. That step takes more time than the same job on a lower car. The wrap installer accounts for it when planning the day.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A tall body (77.2 in (1,961 mm)): the roof is wrapped from a platform.

Film: about 84 ft (25.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 95 ft (29 m).

Roof, hood, chrome delete and PPF on an Excursion

Partial wrap on an Excursion can cover the roof, hood, or mirror caps. Excursion chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end. These jobs use less film than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Ford Excursion: body, cut-outs and film

The Ford Excursion vinyl wrap covers a 5-door SUV that is 226.7 in (5,758 mm) long. Its tall body and large panels call for careful film planning. The wrap installer measures each panel before cutting to limit waste. The size means a two-person team works more comfortably.

Excursion wrap ideas begin with the tailgate, where the rear glass sits in the gate itself. The film ends at the edge of that glass. The tall body, 77.2 in (1,961 mm), puts the roof out of reach. A platform lets the installer wrap the roof safely.

How much vinyl to wrap an Excursion depends on the film type. The estimate is about 84 ft (25.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film uses about 95 ft (29 m) because of pattern matching. One generation means the estimate fits all Excursion years.

Questions about wrapping a Ford Excursion

How much vinyl does it take to wrap a Ford Excursion?

Yes, a Ford Excursion takes about 84 ft (25.5 m) of 60-inch (1.52 m) cast film for a full wrap. Chrome or patterned film needs about 95 ft (29 m). The number comes from the estimate for the newest body.

Can I wrap only the hood or the roof of an Excursion?

Yes, you can wrap only the hood or the roof of an Excursion. A partial wrap can cover the roof, hood, or mirror caps. Chrome delete covers the window trim and badges. Paint protection film is a clear front-end option.

Is an Excursion hard to wrap?

Yes, an Excursion is harder to wrap than a smaller car. The tall body, 77.2 in (1,961 mm), means the roof is wrapped from a platform. The tailgate has the rear glass in it, so the film ends at the edge of the glass. The long body also takes more time.

How many generations of the Excursion does this page cover?

This page covers one generation of the Excursion. Ford built the first generation from 1999 to 2004.