Wraps by car

Ford Explorer Sport Trac wrap

The Ford Explorer Sport Trac wrap page covers the two generations of this pickup-style SUV, produced from 2000 to 2010. A full vinyl wrap on the newer body takes about 69 ft (21 m) of 60-inch (1.52 m) cast film. The first-generation body is slightly smaller and uses a bit less material.

2generations21 mof film for a full wrap

Ford Explorer Sport Trac, second generation, factory photo
Ford Explorer Sport Trac, second generation. Factory color shown.

Ford Explorer Sport Trac wrap colors and ideas

  • Explorer Sport Trac black wrap
  • Explorer Sport Trac white wrap
  • Explorer Sport Trac gray wrap
  • Explorer Sport Trac silver wrap
  • Explorer Sport Trac red wrap
  • Explorer Sport Trac blue wrap
  • Explorer Sport Trac green wrap
  • Explorer Sport Trac yellow wrap
  • Explorer Sport Trac orange wrap
  • Explorer Sport Trac purple wrap
  • Explorer Sport Trac pink wrap
  • Explorer Sport Trac teal wrap
  • Explorer Sport Trac brown wrap
  • Explorer Sport Trac gold wrap
  • Explorer Sport Trac chrome wrap
  • Explorer Sport Trac color shift wrap
  • Explorer Sport Trac carbon fiber wrap
  • Explorer Sport Trac camo and patterned wrap

How much vinyl to wrap a Ford Explorer Sport Trac

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2006–2010pickup (4 doors)210.2 in (5,339 mm)about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 77 ft (23.5 m)
2000–2005pickup (4 doors)205.9 in (5,230 mm)about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m)

Explorer Sport Trac wrap cost factors

The Explorer Sport Trac wrap cost depends on the generation, the film type, and the condition of the body. A chrome or patterned film raises the amount of material, with the newer body needing about 77 ft (23.5 m) and the older about 76 ft (23 m). The pickup bed adds labor because the cab and the bed are wrapped as two bodies.

  • Film for a full wrap: about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 77 ft (23.5 m).
  • Body: pickup (4 doors).
  • A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.
  • A tall body (71.6 in (1,819 mm)): the roof is wrapped from a platform.

Explorer Sport Trac wraps by generation

Swipe sideways. Tap a card for the full description.

Ford Explorer Sport Trac, second generation, factory photo
Factory color shown

2006–2010 Explorer Sport Trac pickup (second generation)

2006–2010pickup (4 doors)210.2 in (5,339 mm)

The second-generation Explorer Sport Trac from 2006 to 2010 has a pickup bed that the wrap treats as a separate body from the cab. The inside of the bed stays bare, so only the exterior surfaces are covered. This generation is 210.2 in (5,339 mm) long and 71.6 in (1,819 mm) tall.

A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.

A tall body (71.6 in (1,819 mm)): the roof is wrapped from a platform.

Film: about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 77 ft (23.5 m).

Ford Explorer Sport Trac, first generation, factory photo
Factory color shown

2000–2005 Explorer Sport Trac pickup (first generation)

2000–2005pickup (4 doors)205.9 in (5,230 mm)

The first-generation Explorer Sport Trac from 2000 to 2005 often shows paint age, so panels may be original or repainted. A test spot comes before a full wrap to check how the vinyl behaves on the surface. This generation is 205.9 in (5,230 mm) long and 70.5 in (1,791 mm) tall.

A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.

A tall body (70.5 in (1,791 mm)): the roof is wrapped from a platform.

Film: about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).

Roof, hood, chrome delete and PPF on an Explorer Sport Trac

A partial wrap on an Explorer Sport Trac can cover the roof, hood, and mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Ford Explorer Sport Trac: body, cut-outs and film

The Ford Explorer Sport Trac is a 4-door pickup, so a vinyl wrap must treat the cab and the bed as two separate bodies. The second generation is 210.2 in (5,339 mm) long and the first is 205.9 in (5,230 mm), which affects how much film is needed. Both are tall vehicles, with roof heights of 71.6 in (1,819 mm) and 70.5 in (1,791 mm) respectively.

For Explorer Sport Trac wrap ideas, the pickup bed is the first detail: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped. The roof is tall and is wrapped from a platform, which takes extra care. Door handles, mirrors, and badges are removed or cut out for a clean finish.

To work out how much vinyl to wrap an Explorer Sport Trac, compare the two generations. The newer body from 2006–2010 is about 69 ft (21 m) of 60-inch (1.52 m) cast film. The older body from 2000–2005 is about 67 ft (20.5 m) of the same film. These figures cover a full wrap in standard cast film.

Questions about wrapping a Ford Explorer Sport Trac

How much vinyl does it take to wrap a Ford Explorer Sport Trac?

A full wrap of the Ford Explorer Sport Trac takes about 69 ft (21 m) of 60-inch (1.52 m) cast film. This figure is for the newest body from 2006–2010. The first-generation body uses slightly less at about 67 ft (20.5 m).

Is the bed of an Explorer Sport Trac wrapped?

No, the inside of the bed is not wrapped. The cab and the bed are wrapped as two separate bodies, but the bed's interior surfaces stay bare.

Can I wrap only the hood or the roof of an Explorer Sport Trac?

Yes, you can wrap only the hood or the roof of an Explorer Sport Trac. A partial wrap can also include the mirror caps. A chrome delete covers the window trim and badges.

Is an Explorer Sport Trac hard to wrap?

An Explorer Sport Trac is harder to wrap than a standard SUV because of the pickup bed. The cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped. The tall roof, at 71.6 in (1,819 mm) or 70.5 in (1,791 mm), means the installer wraps from a platform.