Wraps by car

Ford Falcon wrap

This page covers the Ford Falcon wrap for the three cataloged generations. The catalog holds the first generation from 1960 to 1966, the second from 1964 to 1965, and the third from 1966 to 1970. A full vinyl wrap of the newest body takes about 51 ft (15.5 m) for the coupe to 57 ft (17.5 m) for the wagon.

3generations17.5 mof film for a full wrap

Ford Falcon, third generation, factory photo
Ford Falcon, third generation. Factory color shown.

Ford Falcon wrap colors and ideas

  • Falcon black wrap
  • Falcon white wrap
  • Falcon gray wrap
  • Falcon silver wrap
  • Falcon red wrap
  • Falcon blue wrap
  • Falcon green wrap
  • Falcon yellow wrap
  • Falcon orange wrap
  • Falcon purple wrap
  • Falcon pink wrap
  • Falcon teal wrap
  • Falcon brown wrap
  • Falcon gold wrap
  • Falcon chrome wrap
  • Falcon color shift wrap
  • Falcon carbon fiber wrap
  • Falcon camo and patterned wrap

How much vinyl to wrap a Ford Falcon

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1966–1970coupe, sedan, wagon (2 or 4 or 5 doors)184.3 in (4,681 mm) to 184.6 in (4,689 mm)about 51 ft (15.5 m) for the coupe to 57 ft (17.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 74 ft (22.5 m)
1964–1965convertible, coupe, pickup, sedan, wagon (2 or 4 or 5 doors)184.6 in (4,689 mm)about 49 ft (15 m) for the convertible to 57 ft (17.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 74 ft (22.5 m)
1960–1966convertible, coupe, pickup, sedan, wagon (2 or 3 or 4 or 5 doors)181.2 in (4,602 mm)about 48 ft (14.5 m) for the convertible to 56 ft (17 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 70 ft (21.5 m)

Falcon wrap cost factors

Falcon wrap cost depends on the body style, film type, and body condition. A wagon needs more film than a coupe, as the estimates show 57 ft (17.5 m) for a third generation wagon against 51 ft (15.5 m) for the coupe. Chrome or patterned film raises the amount to 74 ft (22.5 m) on the second and third generations. The first generation uses up to 70 ft (21.5 m) with such film.

  • Film for a full wrap: about 51 ft (15.5 m) for the coupe to 57 ft (17.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 74 ft (22.5 m).
  • Body: coupe, sedan, wagon (2 or 4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Restyled in 1970: bumpers and lights differ between the versions, and so do the film cuts.

Falcon wraps by generation

Swipe sideways. Tap a card for the full description.

Ford Falcon, third generation, factory photo
Factory color shown

1966–1970 Falcon coupe, sedan, wagon (third generation)

1966–1970coupe, sedan, wagon (2 or 4 or 5 doors)184.3 in (4,681 mm) to 184.6 in (4,689 mm)

The third generation Falcon was restyled in 1970 with changed bumpers and lights. Film cut for one version does not fit the other, so the year matters when planning a wrap. This restyling affects the front and rear sections of the body. A 1970 car needs its own template, and the same is true for the earlier 1966 to 1969 cars.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 51 ft (15.5 m) for the coupe to 57 ft (17.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 74 ft (22.5 m).

Ford Falcon, second generation, factory photo
Factory color shown

1964–1965 Falcon convertible, coupe, pickup, sedan, wagon (second generation)

1964–1965convertible, coupe, pickup, sedan, wagon (2 or 4 or 5 doors)184.6 in (4,689 mm)

The second generation Falcon has an open top on convertible bodies. A fabric top is not wrapped, and the film ends where the top begins. If the convertible has a folding hard top, that top is wrapped as panels of its own. This changes the amount of film compared with a closed coupe or sedan.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.

Film: about 49 ft (15 m) for the convertible to 57 ft (17.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 74 ft (22.5 m).

Ford Falcon, first generation, factory photo
Factory color shown

1960–1966 Falcon convertible, coupe, pickup, sedan, wagon (first generation)

1960–1966convertible, coupe, pickup, sedan, wagon (2 or 3 or 4 or 5 doors)181.2 in (4,602 mm)

The first generation Falcon is from 1960 to 1966, so paint age matters before a wrap. Panels may be original or repainted, and a test spot comes before a full wrap. A test spot shows whether the film will stick well to the old paint. On a car of these years, the surface is checked panel by panel.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.

Film: about 48 ft (14.5 m) for the convertible to 56 ft (17 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 70 ft (21.5 m).

Roof, hood, chrome delete and PPF on a Falcon

A partial wrap on a Falcon covers the roof, hood, or mirror caps. Falcon chrome delete covers window trim and badges with black film, which is a smaller job. Paint protection film (PPF) on the front end is clear film over the nose, hood, and fenders. These jobs use less film than a full wrap and can be done on any generation.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Ford Falcon: body, cut-outs and film

A Ford Falcon vinyl wrap follows the body styles and sizes of each generation. The third generation body is 184.3 in (4,681 mm) to 184.6 in (4,689 mm) long, and the first generation is 181.2 in (4,602 mm). The second generation adds a pickup to the convertible, coupe, sedan, and wagon, which changes how film is cut. The coupe uses less film than the wagon in every generation.

Falcon wrap ideas start with the cut-outs and removable parts of each body. A tailgate with the rear glass in it means the film ends at the edge of the glass. Convertible bodies have a fabric top that is not wrapped, and the film ends where the top begins. A pickup bed is wrapped as two bodies: the cab and the bed, while the inside of the bed is not wrapped.

To know how much vinyl to wrap a Falcon, compare the generations and their film estimates. The third generation needs about 51 ft (15.5 m) to 57 ft (17.5 m) of 60-inch (1.52 m) cast film. The second generation is close at about 49 ft (15 m) to 57 ft (17.5 m). The first generation takes the least, about 48 ft (14.5 m) to 56 ft (17 m).

Questions about wrapping a Ford Falcon

How much vinyl does it take to wrap a Ford Falcon?

A full wrap of the newest Falcon takes about 51 ft (15.5 m) for the coupe to 57 ft (17.5 m) for the wagon. That is with 60-inch (1.52 m) cast film, and chrome or patterned film can take up to 74 ft (22.5 m).

Which years of the Falcon take the same film cuts?

The 1960 to 1966 first generation takes the same film cuts within its years, with no restyling noted. The 1964 to 1965 second generation is cut the same across its two years. The 1966 to 1970 third generation splits at the 1970 restyling, so 1966–1969 and 1970 use different cuts.

Which Falcon body takes more film?

The wagon takes more film than any other Falcon body. On the third generation, the wagon takes about 57 ft (17.5 m) while the coupe takes about 51 ft (15.5 m). The same pattern holds on the first and second generations, where the wagon is the top figure in the range.

Can I wrap only the hood or the roof of a Falcon?

Yes, you can wrap only the hood or the roof of a Falcon. A partial wrap covers the roof, hood, or mirror caps, and it is a smaller job than a full wrap. The same is true for chrome delete on the window trim and badges, or clear paint protection film on the front end.