Wraps by car

Ford Freestar wrap

This page covers the Ford Freestar wrap and the vinyl wrap process for this minivan. The Freestar was produced from 2003 to 2007 in a single generation. A full wrap of the newest body uses about 76 ft (23 m) of 60-inch (1.52 m) cast film.

1generations23 mof film for a full wrap

Ford Freestar, first generation, factory photo
Ford Freestar, first generation. Factory color shown.

Ford Freestar wrap colors and ideas

  • Freestar black wrap
  • Freestar white wrap
  • Freestar gray wrap
  • Freestar silver wrap
  • Freestar red wrap
  • Freestar blue wrap
  • Freestar green wrap
  • Freestar yellow wrap
  • Freestar orange wrap
  • Freestar purple wrap
  • Freestar pink wrap
  • Freestar teal wrap
  • Freestar brown wrap
  • Freestar gold wrap
  • Freestar chrome wrap
  • Freestar color shift wrap
  • Freestar carbon fiber wrap
  • Freestar camo and patterned wrap

How much vinyl to wrap a Ford Freestar

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2003–2007van (5 doors)201.0 in (5,105 mm)about 76 ft (23 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 87 ft (26.5 m)

Freestar wrap cost factors

The Freestar wrap cost depends on the film type and the amount of labor. A full wrap uses about 76 ft (23 m) of 60-inch cast film, while chrome or patterned film may need about 87 ft (26.5 m). The tall roof and sliding door tracks add installation time, which affects the final cost.

  • Film for a full wrap: about 76 ft (23 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 87 ft (26.5 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • A tall body (70.6 in (1,793 mm)): the roof is wrapped from a platform.

Freestar wraps by generation

Swipe sideways. Tap a card for the full description.

Ford Freestar, first generation, factory photo
Factory color shown

2003–2007 Freestar van (first generation)

2003–2007van (5 doors)201.0 in (5,105 mm)

The first generation Freestar (2003–2007) has sliding side doors that influence the wrap design. The door tracks stay bare, so the film is cut precisely along those lines. Because the tracks interrupt the side panels, the installer must plan seams carefully.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (70.6 in (1,793 mm)): the roof is wrapped from a platform.

Film: about 76 ft (23 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 87 ft (26.5 m).

Roof, hood, chrome delete and PPF on a Freestar

For a partial wrap on a Freestar, the roof, hood, and mirror caps are common choices. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) can be applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Ford Freestar: body, cut-outs and film

The Ford Freestar vinyl wrap covers a five-door van with a length of 201.0 in (5,105 mm). The tall body means the roof is best wrapped from a platform. The large side panels are straightforward but require careful work around the sliding doors.

For Freestar wrap ideas, start with the areas that need cut-outs or removal. The sliding side door tracks stay bare, so the film is cut along them. The door handles, mirrors, and badges should be removed for a clean result.

To estimate how much vinyl to wrap a Freestar, use the first generation's dimensions. The van is 201.0 in (5,105 mm) long and 70.6 in (1,793 mm) tall. A full wrap needs about 76 ft (23 m) of film, plus extra for mistakes or complex areas.

Questions about wrapping a Ford Freestar

How much vinyl does it take to wrap a Ford Freestar?

It takes about 76 ft (23 m) of 60-inch (1.52 m) cast film to wrap a Ford Freestar. For chrome or patterned film, estimate about 87 ft (26.5 m). These figures assume a full wrap of the 2003–2007 van body.

Are the sliding doors of a Freestar wrapped?

Yes, the sliding doors of a Freestar are wrapped, but the tracks stay bare. The film is cut along the tracks to allow the doors to open and close smoothly. This requires careful trimming.

Can I wrap only the hood or the roof of a Freestar?

Yes, you can wrap only the hood or the roof of a Freestar. A partial wrap might include the roof, hood, and mirror caps. You can also do a chrome delete on the window trim and badges.

Is a Freestar hard to wrap?

A Freestar is not the hardest vehicle to wrap, but its tall body adds work. The roof is 70.6 in (1,793 mm) high, so a platform is needed. The sliding door tracks must remain bare, so the film is cut along them, which takes extra time.