Wraps by car

Ford Fusion wrap

A Ford Fusion wrap is a vinyl film applied to the exterior of the first-generation Fusion, produced from 2002 to 2012. This catalog covers that single generation in its hatchback body style. A full wrap of the newest body takes about 52 ft (16 m) of 60-inch (1.52 m) cast film.

1generations16 mof film for a full wrap

Ford Fusion, first generation, factory photo
Ford Fusion, first generation. Factory color shown.

Ford Fusion wrap colors and ideas

  • Fusion black wrap
  • Fusion white wrap
  • Fusion gray wrap
  • Fusion silver wrap
  • Fusion red wrap
  • Fusion blue wrap
  • Fusion green wrap
  • Fusion yellow wrap
  • Fusion orange wrap
  • Fusion purple wrap
  • Fusion pink wrap
  • Fusion teal wrap
  • Fusion brown wrap
  • Fusion gold wrap
  • Fusion chrome wrap
  • Fusion color shift wrap
  • Fusion carbon fiber wrap
  • Fusion camo and patterned wrap

How much vinyl to wrap a Ford Fusion

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2002–2012hatchback (5 doors)158.0 in (4,013 mm) to 158.3 in (4,020 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m)

Fusion wrap cost factors

Fusion wrap cost depends on the film type and the size of this subcompact hatchback. The body is 158.0 in (4,013 mm) to 158.3 in (4,020 mm) long, which sets the base amount of material. Chrome or patterned film needs about 61 ft (18.5 m), more than a standard color film. Cut-outs for fog lamps on some trims also add labor.

  • Film for a full wrap: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2005: bumpers and lights differ between the versions, and so do the film cuts.

Fusion wraps by generation

Swipe sideways. Tap a card for the full description.

Ford Fusion, first generation, factory photo
Factory color shown

2002–2012 Fusion hatchback (first generation)

2002–2012hatchback (5 doors)158.0 in (4,013 mm) to 158.3 in (4,020 mm)

The first generation Ford Fusion was restyled in 2005 with changes to the bumpers and lights. Film cut for one version does not fit the other because those panels differ. The hatchback shape and overall length stay within a narrow range from 2002 to 2012. Anyone wrapping both versions needs to check the bumper profiles before cutting.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).

Roof, hood, chrome delete and PPF on a Fusion

Partial wrap options for the Ford Fusion include the roof, hood, and mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end. These jobs use less material than a full wrap and can focus on high-wear areas.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Ford Fusion: body, cut-outs and film

The Ford Fusion vinyl wrap has to cover a subcompact hatchback with five doors. Its length runs from 158.0 in (4,013 mm) to 158.3 in (4,020 mm). The five-door layout adds door handles and edges that extend install time. The small size still needs careful film alignment on the tailgate.

Fusion wrap ideas start with the tailgate, where the rear glass sits in the panel and the film ends at the glass edge. Some trims have fog lamps in the front bumper that require cut-outs in the bumper film. The door handles and mirrors come off for a cleaner finish.

To estimate how much vinyl to wrap a Fusion, use the hatchback body measurements from 2002 to 2012. The factory film estimate is about 52 ft (16 m) of 60-inch (1.52 m) cast film. A chrome or patterned film changes the figure to about 61 ft (18.5 m) because of pattern matching.

Questions about wrapping a Ford Fusion

How much vinyl does it take to wrap a Ford Fusion?

A Ford Fusion takes about 52 ft (16 m) of 60-inch (1.52 m) cast film for a full wrap. The estimate comes from the newest body of this model. If you choose chrome or patterned film, the amount rises to about 61 ft (18.5 m).

Which years of the Fusion take the same film cuts?

The years 2002 to 2005 and 2005 to 2012 take different film cuts. The Fusion was restyled in 2005, so bumpers and lights do not match across that year.

Can I wrap only the hood or the roof of a Fusion?

Yes, you can wrap only the hood or the roof of a Fusion. Partial wrap jobs on this car include the roof, hood, and mirror caps. A chrome delete covers the window trim and badges, while paint protection film goes on the front end.

Is a Fusion hard to wrap?

The Ford Fusion is not the hardest car to wrap, but its tailgate and some bumpers add work. The tailgate has the rear glass in it, so the film ends at the edge of the glass. Some trims have fog lamps in the front bumper, which need cut-outs in the film.