Wraps by car

Ford Galaxie (USA) wrap

The Ford Galaxie (USA) wrap page covers all four generations of this full-size Ford, from 1959 to 1974. A complete vinyl wrap of the newest body takes about 57 ft (17.5 m) for the coupe and up to 67 ft (20.5 m) for the wagon. These estimates assume 60-inch (1.52 m) cast film installed by an experienced wrapper.

4generations17.5 mof film for a full wrap

Ford Galaxie (USA), fourth generation, factory photo
Ford Galaxie (USA), fourth generation. Factory color shown.

Ford Galaxie (USA) wrap colors and ideas

  • Galaxie (USA) black wrap
  • Galaxie (USA) white wrap
  • Galaxie (USA) gray wrap
  • Galaxie (USA) silver wrap
  • Galaxie (USA) red wrap
  • Galaxie (USA) blue wrap
  • Galaxie (USA) green wrap
  • Galaxie (USA) yellow wrap
  • Galaxie (USA) orange wrap
  • Galaxie (USA) purple wrap
  • Galaxie (USA) pink wrap
  • Galaxie (USA) teal wrap
  • Galaxie (USA) brown wrap
  • Galaxie (USA) gold wrap
  • Galaxie (USA) chrome wrap
  • Galaxie (USA) color shift wrap
  • Galaxie (USA) carbon fiber wrap
  • Galaxie (USA) camo and patterned wrap

How much vinyl to wrap a Ford Galaxie (USA)

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1968–1974convertible, coupe, sedan, wagon (2 or 4 or 5 doors)213.7 in (5,428 mm)about 57 ft (17.5 m) for the coupe to 67 ft (20.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 85 ft (26 m)
1965–1968convertible, coupe, sedan (2 or 4 doors)213.0 in (5,410 mm)about 59 ft (18 m) for the convertible to 69 ft (21 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 79 ft (24 m)
1960–1964convertible, coupe, sedan, wagon (2 or 4 or 5 doors)209.3 in (5,316 mm)about 56 ft (17 m) for the convertible to 66 ft (20 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 84 ft (25.5 m)
1959–1959convertible, coupe, sedan (2 or 4 doors)208.0 in (5,283 mm)about 56 ft (17 m) for the convertible to 64 ft (19.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 74 ft (22.5 m)

Galaxie (USA) wrap cost factors

A Galaxie (USA) wrap cost depends on the body style, the generation, and the condition of the paint underneath. Longer bodies like the 213.7 in (5,428 mm) fourth-generation wagon need more film and more installation time than a 208.0 in (5,283 mm) first-generation convertible. Chrome or patterned film raises the cost above a standard color change because it uses up to about 85 ft (26 m) on the newest bodies.

  • Film for a full wrap: about 57 ft (17.5 m) for the coupe to 67 ft (20.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 85 ft (26 m).
  • Body: convertible, coupe, sedan, wagon (2 or 4 or 5 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Galaxie (USA) wraps by generation

Swipe sideways. Tap a card for the full description.

Ford Galaxie (USA), fourth generation, factory photo
Factory color shown

1968–1974 Galaxie (USA) convertible, coupe, sedan, wagon (fourth generation)

1968–1974convertible, coupe, sedan, wagon (2 or 4 or 5 doors)213.7 in (5,428 mm)

On a fourth-generation Ford Galaxie (USA) the open top stays open: the fabric top is not wrapped. The vinyl film ends where the fabric or folding hard top starts, and a folding hard top gets its own panels of film. That keeps the top working as designed and gives a clean edge at the beltline.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 57 ft (17.5 m) for the coupe to 67 ft (20.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 85 ft (26 m).

Ford Galaxie (USA), third generation, factory photo
Factory color shown

1965–1968 Galaxie (USA) convertible, coupe, sedan (third generation)

1965–1968convertible, coupe, sedan (2 or 4 doors)213.0 in (5,410 mm)

The third-generation Ford Galaxie (USA) came as a convertible, coupe, or sedan with two or four doors. The body style decides the panel plan and the film amount, from about 59 ft (18 m) for a convertible to 69 ft (21 m) for a sedan. Coupes sit in between, and the difference comes from the roof area and the number of door panels.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 59 ft (18 m) for the convertible to 69 ft (21 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 79 ft (24 m).

Ford Galaxie (USA), second generation, factory photo
Factory color shown

1960–1964 Galaxie (USA) convertible, coupe, sedan, wagon (second generation)

1960–1964convertible, coupe, sedan, wagon (2 or 4 or 5 doors)209.3 in (5,316 mm)

Paint age matters on a second-generation Ford Galaxie (USA), because panels from 1960 to 1964 may be original, repainted, or a mix of both. A test spot of film is applied before a full wrap to check adhesion on the different surfaces. Old paint can be porous or brittle, so the installer tests a small area first.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 56 ft (17 m) for the convertible to 66 ft (20 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 84 ft (25.5 m).

Ford Galaxie (USA), first generation, factory photo
Factory color shown

1959–1959 Galaxie (USA) convertible, coupe, sedan (first generation)

1959–1959convertible, coupe, sedan (2 or 4 doors)208.0 in (5,283 mm)

The 1959 Ford Galaxie (USA) is 208.0 in (5,283 mm) long and came as a convertible, coupe, or sedan. The size and the body style set the amount of film and the number of panels: a convertible needs about 56 ft (17 m) and fewer panels, while a sedan needs about 64 ft (19.5 m) with more roof and door pieces. The coupe falls in between, following the same panel plan as the sedan with a shorter roof.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 56 ft (17 m) for the convertible to 64 ft (19.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 74 ft (22.5 m).

Roof, hood, chrome delete and PPF on a Galaxie (USA)

Smaller jobs on a Ford Galaxie (USA) include a partial wrap of the roof, hood, or mirror caps. A Galaxie (USA) chrome delete covers window trim and badges with black film for a cleaner look. Paint protection film (PPF) is also available as a clear film on the front end to guard against stone chips without changing the car's color.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Ford Galaxie (USA): body, cut-outs and film

A Ford Galaxie (USA) vinyl wrap is a large job because every body style is over 208 in (5,283 mm) long. The film estimate changes with the body style, from about 56 ft (17 m) on a first-generation convertible to 67 ft (20.5 m) on a fourth-generation wagon. Extra length on wagons comes from the tall tailgate and long roof, so the installer plans panels accordingly.

Galaxie (USA) wrap ideas need to account for a convertible top, which is never covered with vinyl. On a convertible the film ends where the fabric or folding hard top begins, and a folding hard top is wrapped as its own set of panels. A wagon with a tailgate that holds the rear glass gets film only up to the edge of that glass.

Knowing how much vinyl to wrap a Galaxie (USA) means comparing the film estimates by generation and body style. The first generation takes about 56 ft (17 m) for a convertible and 64 ft (19.5 m) for a sedan, while the second and third generations go up to 66 ft (20 m) and 69 ft (21 m) respectively. The fourth generation has the widest range, from about 57 ft (17.5 m) for a coupe to 67 ft (20.5 m) for a wagon.

Questions about wrapping a Ford Galaxie (USA)

How much vinyl does it take to wrap a Ford Galaxie (USA)?

About 57 ft (17.5 m) to 67 ft (20.5 m) of vinyl is needed to wrap a Ford Galaxie (USA), depending on the body style. The coupe uses the lower figure and the wagon the higher figure, based on a 60-inch (1.52 m) cast film. Chrome or patterned film can raise the total to about 85 ft (26 m) for the fourth-generation bodies.

Is the top of a Galaxie (USA) wrapped?

No, the top of a Galaxie (USA) is not wrapped. The film ends where the fabric or the folding hard top begins, and a folding hard top is wrapped as its own panels on its own surfaces. The fabric top stays untouched because vinyl film does not bond properly to cloth.

Which Galaxie (USA) body takes more film?

The wagon body of a Galaxie (USA) takes more film than the coupe, convertible, or sedan in the same generation. For the fourth generation the wagon needs about 67 ft (20.5 m) of vinyl, while the coupe needs about 57 ft (17.5 m). The wagon's extra roof length and tall tailgate account for the difference.

Can I wrap only the hood or the roof of a Galaxie (USA)?

Yes, you can wrap only the hood or the roof of a Galaxie (USA). Partial wrap jobs on this car include the roof, hood, and mirror caps as separate panels. A chrome delete of the window trim and badges is another way to change the look without a full wrap.