Wraps by car

Ford GPA wrap

A Ford GPA wrap uses vinyl film to change or protect the body of this open-top SUV. The catalog lists one generation, produced from 1942 to 1943. A full wrap of that body takes about 49 ft (15 m) of 60-inch (1.52 m) cast film.

1generations15 mof film for a full wrap

Ford GPA, first generation, factory photo
Ford GPA, first generation. Factory color shown.

Ford GPA wrap colors and ideas

  • Ford GPA black wrap
  • Ford GPA white wrap
  • Ford GPA gray wrap
  • Ford GPA silver wrap
  • Ford GPA red wrap
  • Ford GPA blue wrap
  • Ford GPA green wrap
  • Ford GPA yellow wrap
  • Ford GPA orange wrap
  • Ford GPA purple wrap
  • Ford GPA pink wrap
  • Ford GPA teal wrap
  • Ford GPA brown wrap
  • Ford GPA gold wrap
  • Ford GPA chrome wrap
  • Ford GPA color shift wrap
  • Ford GPA carbon fiber wrap
  • Ford GPA camo and patterned wrap

How much vinyl to wrap a Ford GPA

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1942–1943open-top SUV181.9 in (4,620 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)

Ford GPA wrap cost factors

The Ford GPA wrap cost depends on the film type, the number of panels and the work needed to reach the roof. This SUV takes about 49 ft (15 m) of cast film, and chrome or patterned film raises the amount to about 56 ft (17 m). The tall body means a platform is required for the roof.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).
  • Body: open-top SUV.
  • Open-top SUV body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • A tall body (68.9 in (1,750 mm)): the roof is wrapped from a platform.

Ford GPA wraps by generation

Swipe sideways. Tap a card for the full description.

Ford GPA, first generation, factory photo
Factory color shown

1942–1943 Ford GPA open-top SUV (first generation)

1942–1943open-top SUV181.9 in (4,620 mm)

The open top of the first generation Ford GPA is not wrapped and the film ends where the fabric or folding top begins. The sides and tailgate are wrapped as normal panels. A folding hard top is wrapped as separate panels if the owner wants it covered.

Open-top SUV body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A tall body (68.9 in (1,750 mm)): the roof is wrapped from a platform.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Roof, hood, chrome delete and PPF on a Ford GPA

A partial wrap on a Ford GPA covers the hood, mirror caps or tailgate. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end.

  • Partial wrap: hood, mirror caps, tailgate.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Ford GPA: body, cut-outs and film

The Ford GPA vinyl wrap has to follow the simple, flat panels of a small military-style SUV. The body is 181.9 in (4,620 mm) long and 68.9 in (1,750 mm) tall, so the roof needs a platform to reach. The open top and short overhangs leave fewer curved edges than on a modern car.

Ford GPA wrap ideas begin with the tailgate, which has the rear glass set into it and the film ends at the edge of the glass. The open top means the fabric is not wrapped and the film ends where the top begins. A folding hard top is treated as separate panels.

How much vinyl to wrap a Ford GPA is the same for every 1942–1943 body because there is only one generation. The open-top body has no fixed roof, so the estimate of 49 ft (15 m) covers the painted surfaces only. A chrome or patterned film needs more, about 56 ft (17 m).

Questions about wrapping a Ford GPA

How much vinyl does it take to wrap a Ford GPA?

A Ford GPA takes about 49 ft (15 m) of 60-inch (1.52 m) cast film for a full wrap. If the film is chrome or patterned, the amount is about 56 ft (17 m).

Is the top of a Ford GPA wrapped?

No, the top of a Ford GPA is not wrapped. The open top has a fabric cover that is left as is, and the film ends where the top begins. If the car has a folding hard top, those panels can be wrapped separately.

Can I wrap only the hood or the roof of a Ford GPA?

Yes, you can wrap only the hood or the roof of a Ford GPA. The partial wrap options include the hood, mirror caps and tailgate. The roof is wrapped from a platform because the body is 68.9 in (1,750 mm) tall.

Is a Ford GPA hard to wrap?

A Ford GPA is not the easiest vehicle to wrap because of its tall body and simple but boxy shape. The roof is 68.9 in (1,750 mm) high, so a platform is needed. The tailgate has the rear glass in it, and the film must end at the edge of the glass.