Wraps by car

Ford GT40 wrap

This page covers the Ford GT40 wrap for the single generation built from 1964 to 1969. The car is a two-door coupe sports car with a body length of 160.0 inches (4,064 mm). A full wrap of this body takes about 39 feet (12 m) of 60-inch (1.52 m) cast vinyl film.

1generations12 mof film for a full wrap

Ford GT40, first generation, factory photo
Ford GT40, first generation. Factory color shown.

Ford GT40 wrap colors and ideas

  • Ford GT40 black wrap
  • Ford GT40 white wrap
  • Ford GT40 gray wrap
  • Ford GT40 silver wrap
  • Ford GT40 red wrap
  • Ford GT40 blue wrap
  • Ford GT40 green wrap
  • Ford GT40 yellow wrap
  • Ford GT40 orange wrap
  • Ford GT40 purple wrap
  • Ford GT40 pink wrap
  • Ford GT40 teal wrap
  • Ford GT40 brown wrap
  • Ford GT40 gold wrap
  • Ford GT40 chrome wrap
  • Ford GT40 color shift wrap
  • Ford GT40 carbon fiber wrap
  • Ford GT40 camo and patterned wrap

How much vinyl to wrap a Ford GT40

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1964–1969coupe (2 doors)160.0 in (4,064 mm)about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 46 ft (14 m)

Ford GT40 wrap cost factors

The Ford GT40 wrap cost depends mainly on the two long doors and the amount of film the coupe needs. A standard color change wrap uses about 39 feet (12 m) of 60-inch (1.52 m) cast film, while chrome or patterned film lifts the figure to about 46 feet (14 m). Paint condition also matters, because a 1964–1969 car may have original or resprayed panels that need more prep and a test patch before wrapping.

  • Film for a full wrap: about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 46 ft (14 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Ford GT40 wraps by generation

Swipe sideways. Tap a card for the full description.

Ford GT40, first generation, factory photo
Factory color shown

1964–1969 Ford GT40 coupe (first generation)

1964–1969coupe (2 doors)160.0 in (4,064 mm)

The first generation Ford GT40 spans 1964 to 1969 and is a two-door coupe that measures 160.0 inches (4,064 mm) long. On a car of these years the paint may be original or repainted, so a test spot on each panel comes before a full wrap. The two long side doors are large enough to become one piece of film each, which keeps the sides clean.

Two long side doors: each door is one large piece of film.

Film: about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 46 ft (14 m).

Roof, hood, chrome delete and PPF on a Ford GT40

A partial wrap on a Ford GT40 concentrates on the roof, the hood, or the mirror caps. The roof and hood are small enough to cut from leftover film after a full-wrap job. Chrome delete suits this car by covering the window trim and badges with black film, while paint protection film (PPF) can be applied as clear film on the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Ford GT40: body, cut-outs and film

A Ford GT40 vinyl wrap starts with a low, compact coupe body that measures just 160.0 inches (4,064 mm) overall. The two long side doors become one large film piece each and add the main working area. Because the car has only one body style and a short production run, film panels repeat from side to side.

Ford GT40 wrap ideas often begin with the two long side doors, which are the largest single pieces on the body. Each door panel is best cut generously and trimmed after the film is laid, so seams stay off the outer skin. The low roof and rounded tail need relief cuts to follow the curves cleanly.

When you work out how much vinyl to wrap a Ford GT40, the single generation makes the count simple. Every 1964–1969 coupe shares the same 160.0-inch (4,064 mm) length and the same panel layout. The only real variable is film choice, because a chrome or patterned finish raises the estimate to about 46 feet (14 m).

Questions about wrapping a Ford GT40

How much vinyl does it take to wrap a Ford GT40?

A full wrap of a Ford GT40 takes about 39 feet (12 m) of 60-inch (1.52 m) cast vinyl film for a standard color change. If the film has a chrome or patterned finish, the estimate rises to about 46 feet (14 m). The coupe's two long doors and low roof mean the film must be cut generously and trimmed on the body.

Can I wrap only the hood or the roof of a Ford GT40?

Yes, you can wrap only the hood or the roof of a Ford GT40. A partial wrap on this car commonly covers the roof, hood, or mirror caps. Paint protection film (PPF) is another smaller job: clear film applied to the front end.

Is a Ford GT40 hard to wrap?

The Ford GT40 is demanding to wrap because of its two long side doors and the film size they require. Each door is a single large piece that has to be laid without wrinkles over a curved skin. The car's compact 160.0-inch (4,064 mm) length also leaves little room to hide seams.

How many generations of the Ford GT40 does this page cover?

This page covers one generation of the Ford GT40, the first generation built from 1964 to 1969. It was the only generation produced under the GT40 name at that time. The catalog page lists that generation as a single body style, a two-door coupe.