Wraps by car

Ford Ikon wrap

The Ford Ikon wrap page covers the first-generation sedan from 1999 to 2011 and the second-generation sedan from 2007 to 2015. A full vinyl wrap of the newest body takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. The sedan body style and 163.0 in (4,140 mm) length are the same for both generations.

2generations15.5 mof film for a full wrap

Ford Ikon, second generation, factory photo
Ford Ikon, second generation. Factory color shown.

Ford Ikon wrap colors and ideas

  • Ikon black wrap
  • Ikon white wrap
  • Ikon gray wrap
  • Ikon silver wrap
  • Ikon red wrap
  • Ikon blue wrap
  • Ikon green wrap
  • Ikon yellow wrap
  • Ikon orange wrap
  • Ikon purple wrap
  • Ikon pink wrap
  • Ikon teal wrap
  • Ikon brown wrap
  • Ikon gold wrap
  • Ikon chrome wrap
  • Ikon color shift wrap
  • Ikon carbon fiber wrap
  • Ikon camo and patterned wrap

How much vinyl to wrap a Ford Ikon

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2007–2015sedan (4 doors)163.0 in (4,140 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m)
1999–2011sedan (4 doors)163.0 in (4,140 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m)

Ikon wrap cost factors

The Ikon wrap cost depends on the amount of film, the condition of the paint, and the shop's labor rate. A full wrap uses about 51 ft (15.5 m) of 60-inch (1.52 m) cast film, while chrome or patterned film adds about 8 ft (2.5 m). Paint correction before wrapping adds labor if the surface has scratches or chips. Removing parts like door handles and mirrors also adds time.

  • Film for a full wrap: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).
  • Body: sedan (4 doors).

Ikon wraps by generation

Swipe sideways. Tap a card for the full description.

Ford Ikon, second generation, factory photo
Factory color shown

2007–2015 Ikon sedan (second generation)

2007–2015sedan (4 doors)163.0 in (4,140 mm)

The second-generation Ford Ikon from 2007 to 2015 has a sedan body and 163.0 in (4,140 mm) length. Paint age matters: on a car of these years panels may be original or repainted, and a test spot comes before a full wrap. The wrap film needs a clean, stable surface to bond well. An installer will test a small area to confirm the paint will hold.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).

Ford Ikon, first generation, factory photo
Factory color shown

1999–2011 Ikon sedan (first generation)

1999–2011sedan (4 doors)163.0 in (4,140 mm)

The first-generation Ford Ikon covers the sedan built from 1999 to 2011. Its years overlap with the newer body from 2007 to 2011, so the owner of a car from those years checks which body it is. The body style and length are the same as the second generation, so the film estimate is also 51 ft (15.5 m). A partial wrap is a good way to cover high-wear areas first.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).

Roof, hood, chrome delete and PPF on an Ikon

A partial wrap on the Ford Ikon can cover the roof, hood, or mirror caps. An Ikon chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film on the front end to guard against stone chips. These jobs use less film than a full wrap and are a good starting point.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Ford Ikon: body, cut-outs and film

A Ford Ikon vinyl wrap is a straightforward job thanks to the four-door sedan body and subcompact size. Both generations measure 163.0 in (4,140 mm) long, which keeps the amount of film predictable. The four doors and trunk lid are the largest flat panels, so the installer can work efficiently. The roof is also simple to cover because it has no roof rails or antenna in the way.

Ikon wrap ideas often start with the parts that need extra attention during installation. The door handles, mirrors, and badges are removed for a clean finish, and the front and rear bumpers need careful stretching. The window trim and grille are usually covered with cut-outs rather than removed. The fuel filler door is also wrapped separately so it can still open.

If you are figuring out how much vinyl to wrap an Ikon, the two generations are essentially the same. Both the 1999–2011 first generation and the 2007–2015 second generation use about 51 ft (15.5 m) of 60-inch (1.52 m) cast film for a full wrap. The only difference is that a car from 2007 to 2011 could be either generation, so the owner checks the body style before ordering film. The film estimate is the same either way.

Questions about wrapping a Ford Ikon

How much vinyl does it take to wrap a Ford Ikon?

It takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film to wrap a Ford Ikon. That figure covers the newest body, the second-generation sedan. The first generation needs the same amount because the body style and length are the same.

Can I wrap only the hood or the roof of an Ikon?

Yes, you can wrap only the hood or the roof of an Ikon. Those are common partial wrap areas, along with mirror caps. A chrome delete of the window trim and badges is also a smaller job.

Is an Ikon hard to wrap?

The Ikon is not hard to wrap, but its bumpers and door handles add work. The bumpers need careful stretching and the handles are removed for a clean finish. The subcompact size means fewer square feet of film, which makes the job manageable.

How many generations of the Ikon does this page cover?

This page covers two generations of the Ford Ikon: the first generation from 1999 to 2011 and the second generation from 2007 to 2015.