Wraps by car

Ford KA wrap

The Ford KA wrap page covers three generations of this mini car, from the first 1996–2008 body to the third 2014–2021 generation. A full vinyl wrap of the newest body takes about 51 ft (15.5 m) for the hatchback and about 52 ft (16 m) for the sedan, using 60-inch (1.52 m) cast film.

3generations16 mof film for a full wrap

Ford KA, third generation, factory photo
Ford KA, third generation. Factory color shown.

Ford KA wrap colors and ideas

  • Ford KA black wrap
  • Ford KA white wrap
  • Ford KA gray wrap
  • Ford KA silver wrap
  • Ford KA red wrap
  • Ford KA blue wrap
  • Ford KA green wrap
  • Ford KA yellow wrap
  • Ford KA orange wrap
  • Ford KA purple wrap
  • Ford KA pink wrap
  • Ford KA teal wrap
  • Ford KA brown wrap
  • Ford KA gold wrap
  • Ford KA chrome wrap
  • Ford KA color shift wrap
  • Ford KA carbon fiber wrap
  • Ford KA camo and patterned wrap

How much vinyl to wrap a Ford KA

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2014–2021hatchback, sedan (4 or 5 doors)153.0 in (3,886 mm) to 167.5 in (4,254 mm)about 51 ft (15.5 m) for the hatchback to 52 ft (16 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 61 ft (18.5 m)
2008–2016hatchback (3 doors)142.5 in (3,620 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)
1996–2008convertible, hatchback (2 or 3 doors)143.7 in (3,650 mm)about 39 ft (12 m) for the convertible to 43 ft (13 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 54 ft (16.5 m)

Ford KA wrap cost factors

The Ford KA wrap cost depends mainly on the body style, the film type, and the amount of disassembly. A third-generation sedan uses about 52 ft (16 m) of cast film, while a first-generation convertible takes about 39 ft (12 m). Patterned or chrome film can push the estimate up to about 61 ft (18.5 m) on the newest body.

  • Film for a full wrap: about 51 ft (15.5 m) for the hatchback to 52 ft (16 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 61 ft (18.5 m).
  • Body: hatchback, sedan (4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Restyled in 2018: bumpers and lights differ between the versions, and so do the film cuts.

Ford KA wraps by generation

Swipe sideways. Tap a card for the full description.

Ford KA, third generation, factory photo
Factory color shown

2014–2021 Ford KA hatchback, sedan (third generation)

2014–2021hatchback, sedan (4 or 5 doors)153.0 in (3,886 mm) to 167.5 in (4,254 mm)

The restyled 2018 Ford KA changed the bumpers and lights, so film cut for one version does not fit the other. A wrap kit for the 2014–2017 front end will not match the updated panels from 2018 onward. Installers must verify the production year before cutting or ordering templates.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 51 ft (15.5 m) for the hatchback to 52 ft (16 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 61 ft (18.5 m).

Ford KA, second generation, factory photo
Factory color shown

2008–2016 Ford KA hatchback (second generation)

2008–2016hatchback (3 doors)142.5 in (3,620 mm)

The second-generation Ford KA hatchback was built from 2008 to 2016 and overlaps with the newer body from 2014 to 2016. Owners of a KA from those overlapping years need to confirm which body style they have before buying film. The second generation has a three-door design with two long side doors, each door taking one large piece of film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Ford KA, first generation, factory photo
Factory color shown

1996–2008 Ford KA convertible, hatchback (first generation)

1996–2008convertible, hatchback (2 or 3 doors)143.7 in (3,650 mm)

The first-generation Ford KA from 1996 to 2008 may have original or repainted panels, so a test spot comes before a full wrap. Paint condition affects adhesion, especially on older cars with fading or clear coat damage. A small test area helps confirm that the vinyl will bond cleanly to the surface.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 39 ft (12 m) for the convertible to 43 ft (13 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 54 ft (16.5 m).

Roof, hood, chrome delete and PPF on a Ford KA

A partial wrap on a Ford KA can cover just the roof, hood, or mirror caps, or you can order a Ford KA chrome delete for the window trim and badges. Paint protection film (PPF) is another option, applied as clear film on the front end. These smaller jobs use less material and still change the look of the car.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Ford KA: body, cut-outs and film

The Ford KA vinyl wrap fits a compact footprint, with the newest generation measuring 153.0 in (3,886 mm) to 167.5 in (4,254 mm) depending on body style. The third generation comes as a four- or five-door hatchback or a four-door sedan, while earlier generations vary between three-door hatchbacks and a two-door convertible. These small dimensions keep material needs modest, but every panel still requires careful fitting.

Ford KA wrap ideas should account for several body features that demand cut-outs or removal. All generations have a tailgate with the rear glass set into it, so the film ends at the edge of the glass. The second-generation three-door model has two long side doors, each wrapped as one large piece of film. The first-generation convertible includes a fabric top that is not wrapped, with the film ending where the top begins; a folding hard top is wrapped as panels of its own.

Knowing how much vinyl to wrap a Ford KA means checking the generation and body style before ordering. The first generation uses about 39 ft (12 m) for the convertible and 43 ft (13 m) for the hatchback, while the second generation needs about 48 ft (14.5 m). The third generation takes the most, at about 51–52 ft (15.5–16 m), so confirm the exact version before counting film.

Questions about wrapping a Ford KA

How much vinyl does it take to wrap a Ford KA?

A Ford KA wrap takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film for the third-generation hatchback, and about 52 ft (16 m) for the sedan. That estimate covers a full color change wrap with normal waste.

Which years of the Ford KA take the same film cuts?

The same film cuts fit the Ford KA within each generation's production years, except for the 2018 restyling of the third generation. For the first generation, 1996–2008 panels are shared, and for the second generation, 2008–2016 panels are shared. A 2014–2016 car could be either the second or third generation, so check the body style.

Which Ford KA body takes more film?

The sedan of the third-generation Ford KA takes more film than the hatchback or any earlier body style. The sedan uses about 52 ft (16 m) versus about 51 ft (15.5 m) for the hatchback, and the first-generation convertible uses the least at about 39 ft (12 m).

Can I wrap only the hood or the roof of a Ford KA?

Yes, you can wrap only the hood or the roof of a Ford KA, and a partial wrap is a common small job. A roof wrap, hood wrap, or mirror caps can be done without wrapping the whole car, and a chrome delete covers the window trim and badges.