Wraps by car

Ford Model A wrap

A Ford Model A wrap page covers the first-generation 1927–1931 car in its convertible, coupe, pickup, sedan, and wagon forms. The catalog lists one generation of the Ford Model A, and a full vinyl wrap of the newest body takes about 51 ft (15.5 m) to 57 ft (17.5 m) of 60-inch (1.52 m) cast film.

1generations16 mof film for a full wrap

Ford Model A, first generation, factory photo
Ford Model A, first generation. Factory color shown.

Ford Model A wrap colors and ideas

  • Ford Model A black wrap
  • Ford Model A white wrap
  • Ford Model A gray wrap
  • Ford Model A silver wrap
  • Ford Model A red wrap
  • Ford Model A blue wrap
  • Ford Model A green wrap
  • Ford Model A yellow wrap
  • Ford Model A orange wrap
  • Ford Model A purple wrap
  • Ford Model A pink wrap
  • Ford Model A teal wrap
  • Ford Model A brown wrap
  • Ford Model A gold wrap
  • Ford Model A chrome wrap
  • Ford Model A color shift wrap
  • Ford Model A carbon fiber wrap
  • Ford Model A camo and patterned wrap

How much vinyl to wrap a Ford Model A

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1927–1931convertible, coupe, pickup, sedan, wagon (2 or 4 or 5 doors)165.0 in (4,191 mm)about 51 ft (15.5 m) for the convertible to 57 ft (17.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m)

Ford Model A wrap cost factors

A Ford Model A wrap cost depends on the body style, with the wagon needing more film than the convertible. The film estimate runs from about 51 ft (15.5 m) to 57 ft (17.5 m) of 60-inch (1.52 m) cast film, and chrome or patterned film can raise the total to about 66 ft (20 m). The wrap also depends on the cut-outs, the number of panels, and how much of the body is disassembled.

  • Film for a full wrap: about 51 ft (15.5 m) for the convertible to 57 ft (17.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m).
  • Body: convertible, coupe, pickup, sedan, wagon (2 or 4 or 5 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.
  • A tall body (69.5 in (1,765 mm)): the roof is wrapped from a platform.

Ford Model A wraps by generation

Swipe sideways. Tap a card for the full description.

Ford Model A, first generation, factory photo
Factory color shown

1927–1931 Ford Model A convertible, coupe, pickup, sedan, wagon (first generation)

1927–1931convertible, coupe, pickup, sedan, wagon (2 or 4 or 5 doors)165.0 in (4,191 mm)

On the first-generation Ford Model A, a convertible with a fabric top is not wrapped on that top, and the film ends where the fabric begins. A folding hard top is wrapped as its own panels, but the edges still stop at the panel seams. This keeps the top's movement and folding action free of film.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.

A tall body (69.5 in (1,765 mm)): the roof is wrapped from a platform.

Film: about 51 ft (15.5 m) for the convertible to 57 ft (17.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m).

Roof, hood, chrome delete and PPF on a Ford Model A

A partial wrap on a Ford Model A can cover the roof, hood, or mirror caps without wrapping the whole body. A Ford Model A chrome delete covers window trim and badges with black film instead of chrome. Paint protection film (PPF) in clear is another option for the front end only.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Ford Model A: body, cut-outs and film

A Ford Model A vinyl wrap starts with its compact body, which is 165.0 in (4,191 mm) long and 69.5 in (1,765 mm) tall in every style. The convertible, coupe, pickup, sedan, and wagon all sit on the same footprint, so the wrap area differs mainly by roof and rear section. A tall body means the roof is wrapped from a platform, and the wagon's taller rear adds the most film.

Ford Model A wrap ideas include wrapping a pickup as two bodies, with the cab and the bed done separately and the inside of the bed left unwrapped. On a convertible, a fabric top is not wrapped and the film ends where it begins, while a folding hard top is wrapped as panels of its own. A tailgate with rear glass in it is wrapped only up to the edge of the glass.

If you are counting how much vinyl to wrap a Ford Model A, the first-generation 1927–1931 body is the only one in the catalog. The film estimate runs from about 51 ft (15.5 m) for the convertible to 57 ft (17.5 m) for the wagon, using 60-inch (1.52 m) cast film. Chrome or patterned film can raise the total to about 66 ft (20 m) on any body.

Questions about wrapping a Ford Model A

How much vinyl does it take to wrap a Ford Model A?

A Ford Model A takes about 51 ft (15.5 m) to 57 ft (17.5 m) of 60-inch (1.52 m) cast film for a full wrap, depending on body style. The wagon sits at the upper end of that range and the convertible at the lower end. With chrome or patterned film, plan for up to about 66 ft (20 m).

Is the top of a Ford Model A wrapped?

No, a fabric top on a Ford Model A convertible is not wrapped, and the film ends where the fabric begins. A folding hard top is wrapped as its own panels. This is one of the wrap details that changes by body type.

Is the bed of a Ford Model A wrapped?

No, the inside of a Ford Model A pickup bed is not wrapped. The cab and the bed are wrapped as two separate bodies. Film is applied only to the outside surfaces of the bed.

Which Ford Model A body takes more film?

The Ford Model A wagon takes more film than the convertible, at about 57 ft (17.5 m) versus about 51 ft (15.5 m). The taller rear body of the wagon is the main reason for the extra material. Both figures are for 60-inch (1.52 m) cast film.