Wraps by car

Ford Model T wrap

The Ford Model T wrap page covers the single generation produced from 1908 to 1927. A full wrap of the newest body takes about 44 ft (13.5 m) for the convertible to 54 ft (16.5 m) for the van. Installers use 60-inch (1.52 m) cast film for this vehicle. Chrome or patterned film can require up to about 62 ft (19 m).

1generations13.5 mof film for a full wrap

Ford Model T, first generation, factory photo
Ford Model T, first generation. Factory color shown.

Ford Model T wrap colors and ideas

  • Ford Model T black wrap
  • Ford Model T white wrap
  • Ford Model T gray wrap
  • Ford Model T silver wrap
  • Ford Model T red wrap
  • Ford Model T blue wrap
  • Ford Model T green wrap
  • Ford Model T yellow wrap
  • Ford Model T orange wrap
  • Ford Model T purple wrap
  • Ford Model T pink wrap
  • Ford Model T teal wrap
  • Ford Model T brown wrap
  • Ford Model T gold wrap
  • Ford Model T chrome wrap
  • Ford Model T color shift wrap
  • Ford Model T carbon fiber wrap
  • Ford Model T camo and patterned wrap

How much vinyl to wrap a Ford Model T

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1908–1927convertible, coupe, pickup, sedan, van (2 or 4 doors)133.9 in (3,400 mm)about 44 ft (13.5 m) for the convertible to 54 ft (16.5 m) for the van, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 62 ft (19 m)

Ford Model T wrap cost factors

Ford Model T wrap cost depends on the body style, the film quality, and the labor involved. The car's length of 133.9 in (3,400 mm) is small, but a van with sliding doors takes more time. A pickup bed adds separate wrapping of the cab and bed. Chrome or patterned film can push the material up to about 62 ft (19 m).

  • Film for a full wrap: about 44 ft (13.5 m) for the convertible to 54 ft (16.5 m) for the van, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 62 ft (19 m).
  • Body: convertible, coupe, pickup, sedan, van (2 or 4 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • A tall body (70.9 in (1,800 mm)): the roof is wrapped from a platform.

Ford Model T wraps by generation

Swipe sideways. Tap a card for the full description.

Ford Model T, first generation, factory photo
Factory color shown

1908–1927 Ford Model T convertible, coupe, pickup, sedan, van (first generation)

1908–1927convertible, coupe, pickup, sedan, van (2 or 4 doors)133.9 in (3,400 mm)

On the first generation Ford Model T, an open top is treated by its type. The film ends where a fabric top begins because fabric is not wrapped. A folding hard top is wrapped as panels of its own. The wrap process leaves factory hinges and seals untouched.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (70.9 in (1,800 mm)): the roof is wrapped from a platform.

Film: about 44 ft (13.5 m) for the convertible to 54 ft (16.5 m) for the van, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 62 ft (19 m).

Roof, hood, chrome delete and PPF on a Ford Model T

A partial wrap on the Ford Model T covers the roof, hood, or mirror caps. A chrome delete turns the window trim and badges black with film. Paint protection film is clear film on the front end. Each job uses less material than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Ford Model T: body, cut-outs and film

The Ford Model T vinyl wrap is shaped by body styles that range from a subcompact convertible to a four-door van. Length stays at 133.9 in (3,400 mm) across the range, but panel count differs. A pickup bed or tall roof adds film that a coupe does not need. The estimate therefore runs from about 44 ft (13.5 m) to 54 ft (16.5 m) of 60-inch (1.52 m) film.

Ford Model T wrap ideas must account for cut-outs and removed parts. On a convertible body, a fabric top is not wrapped and the film ends where it begins. A pickup bed has the cab and bed wrapped as two bodies, leaving the inside bare. Sliding side doors keep their tracks clear, and the film is cut along them.

How much vinyl to wrap a Ford Model T changes with the body style and the generation. The first generation spans 1908 to 1927, so early and late examples share the same basic dimensions. A convertible needs less film than a van because the fabric top is left unwrapped. A tall body of 70.9 in (1,800 mm) also adds roof area to the job.

Questions about wrapping a Ford Model T

How much vinyl does it take to wrap a Ford Model T?

About 44 ft (13.5 m) to 54 ft (16.5 m) of 60-inch (1.52 m) cast film is needed for a Ford Model T. The lower figure suits a convertible with a fabric top, while the upper figure suits the van. A full wrap with chrome or patterned film can take up to about 62 ft (19 m).

Is the top of a Ford Model T wrapped?

No, a fabric top of the Ford Model T is not wrapped. The film ends where the fabric begins. A folding hard top can be wrapped as panels of its own.

Is the bed of a Ford Model T wrapped?

No, the inside of the Ford Model T bed is not wrapped. The cab and bed are wrapped as two separate bodies. Only the visible outer surfaces receive film.

Are the sliding doors of a Ford Model T wrapped?

Yes, the sliding doors of the Ford Model T are wrapped. The door tracks stay bare, and the film is cut along them. The panels move without interference from the vinyl.