Wraps by car

Ford Mondeo ST wrap

A Ford Mondeo ST wrap covers the third generation (2002–2007) and second generation (1999–2001) of this mid-size car. A full vinyl wrap of the newest body uses about 52 ft (16 m) for the sedan and 57 ft (17.5 m) for the wagon. The film is 60-inch (1.52 m) cast vinyl, and chrome or patterned film can take up to about 74 ft (22.5 m).

2generations16 mof film for a full wrap

Ford Mondeo ST, third generation, factory photo
Ford Mondeo ST, third generation. Factory color shown.

Ford Mondeo ST wrap colors and ideas

  • Mondeo ST black wrap
  • Mondeo ST white wrap
  • Mondeo ST gray wrap
  • Mondeo ST silver wrap
  • Mondeo ST red wrap
  • Mondeo ST blue wrap
  • Mondeo ST green wrap
  • Mondeo ST yellow wrap
  • Mondeo ST orange wrap
  • Mondeo ST purple wrap
  • Mondeo ST pink wrap
  • Mondeo ST teal wrap
  • Mondeo ST brown wrap
  • Mondeo ST gold wrap
  • Mondeo ST chrome wrap
  • Mondeo ST color shift wrap
  • Mondeo ST carbon fiber wrap
  • Mondeo ST camo and patterned wrap

How much vinyl to wrap a Ford Mondeo ST

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2002–2007hatchback, sedan, wagon (4 or 5 doors)186.3 in (4,731 mm) to 189.1 in (4,804 mm)about 52 ft (16 m) for the sedan to 57 ft (17.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 74 ft (22.5 m)
1999–2001hatchback, sedan, wagon (4 or 5 doors)179.4 in (4,556 mm) to 183.9 in (4,671 mm)about 51 ft (15.5 m) for the sedan to 56 ft (17 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 70 ft (21.5 m)

Mondeo ST wrap cost factors

The Mondeo ST wrap cost depends on the body style and film amount. A sedan starts at about 52 ft (16 m) and a wagon at about 57 ft (17.5 m) of 60-inch (1.52 m) cast film, so more film means more work. The second generation uses slightly less, at 51 ft (15.5 m) to 56 ft (17 m). Chrome delete and partial jobs change the panel plan and the labor.

  • Film for a full wrap: about 52 ft (16 m) for the sedan to 57 ft (17.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 74 ft (22.5 m).
  • Body: hatchback, sedan, wagon (4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Mondeo ST wraps by generation

Swipe sideways. Tap a card for the full description.

Ford Mondeo ST, third generation, factory photo
Factory color shown

2002–2007 Mondeo ST hatchback, sedan, wagon (third generation)

2002–2007hatchback, sedan, wagon (4 or 5 doors)186.3 in (4,731 mm) to 189.1 in (4,804 mm)

The third generation Mondeo ST comes as a hatchback, sedan, and wagon, and the style decides the panel plan and the film amount. A sedan is 186.3 in (4,731 mm) to 189.1 in (4,804 mm) long and takes about 52 ft (16 m). The wagon is the longest panel plan on this body and takes about 57 ft (17.5 m). The hatchback shares the front doors and hood with the sedan but has a shorter rear end.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 52 ft (16 m) for the sedan to 57 ft (17.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 74 ft (22.5 m).

Ford Mondeo ST, second generation, factory photo
Factory color shown

1999–2001 Mondeo ST hatchback, sedan, wagon (second generation)

1999–2001hatchback, sedan, wagon (4 or 5 doors)179.4 in (4,556 mm) to 183.9 in (4,671 mm)

The second generation Mondeo ST runs from 1999 to 2001, and paint age is a real factor on a car of these years. Panels may be original or repainted, so a test spot comes before a full wrap. The film sticks differently to aged clear coat or a respray, and a small test patch on each panel shows what you are working with. The installer can then decide on the primer or surface prep.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 51 ft (15.5 m) for the sedan to 56 ft (17 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 70 ft (21.5 m).

Roof, hood, chrome delete and PPF on a Mondeo ST

A partial wrap on a Mondeo ST can cover the roof, hood, or mirror caps. A Mondeo ST chrome delete wraps the window trim and badges with black film. Paint protection film (PPF) is a clear film on the front end to guard against stone chips. These jobs use less film than a full wrap and can be done one panel at a time.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Ford Mondeo ST: body, cut-outs and film

The Ford Mondeo ST vinyl wrap follows the body style because the car came as a hatchback, sedan, and wagon. The sedan is 186.3 in (4,731 mm) to 189.1 in (4,804 mm) long and needs about 52 ft (16 m) of film. The wagon is the largest panel plan and takes about 57 ft (17.5 m) with the same 60-inch (1.52 m) cast film. A hatchback sits between the two in film need.

Mondeo ST wrap ideas start from the tailgate: the rear glass is part of the tailgate, so the film ends at the edge of the glass. The installer cuts around every edge cleanly and uses knifeless tape where a panel meets a seal. Door handles, mirrors, and badges come off for a clean color change wrap. The long roof and the pillars are wrapped as single pieces on this car.

To know how much vinyl to wrap a Mondeo ST, compare the two generations. The third generation from 2002–2007 is 186.3 in (4,731 mm) to 189.1 in (4,804 mm) long and uses 52 ft (16 m) to 57 ft (17.5 m). The second generation from 1999–2001 is shorter at 179.4 in (4,556 mm) to 183.9 in (4,671 mm) and takes 51 ft (15.5 m) to 56 ft (17 m). A chrome or patterned wrap adds about 15 to 20 percent more film on both generations.

Questions about wrapping a Ford Mondeo ST

How much vinyl does it take to wrap a Ford Mondeo ST?

A full wrap of the newest Mondeo ST takes about 52 ft (16 m) for the sedan and 57 ft (17.5 m) for the wagon. The film is 60-inch (1.52 m) cast vinyl, and a chrome or patterned wrap can take up to about 74 ft (22.5 m). The exact amount depends on the body style and the installer's panel plan.

Which Mondeo ST body takes more film?

The wagon takes more film than the sedan on a Mondeo ST. A wagon uses about 57 ft (17.5 m) and a sedan about 52 ft (16 m) of 60-inch (1.52 m) cast film. The hatchback falls between the two in film need.

Can I wrap only the hood or the roof of a Mondeo ST?

Yes, you can wrap only the hood or the roof of a Mondeo ST. A partial wrap on this car can cover the roof, hood, or mirror caps. The roof is a large flat panel that is easy to wrap, and the hood is done with one piece of film.

Is a Mondeo ST hard to wrap?

A Mondeo ST is not hard to wrap, but the tailgate adds work. The rear glass is part of the tailgate, so the film ends at the edge of the glass and needs a precise cut. The car is mid-size, so the large roof and long side panels take a careful hand but no special tools beyond standard wrap gear.