Wraps by car

Ford Probe wrap

This page covers the Ford Probe wrap, a vinyl wrap for the two generations of this coupe made from 1988 to 1997. The newest body, sold from 1992 to 1997, takes about 49 ft (15 m) of 60-inch (1.52 m) cast film for a full color change.

2generations15 mof film for a full wrap

Ford Probe, second generation, factory photo
Ford Probe, second generation. Factory color shown.

Ford Probe wrap colors and ideas

  • Probe black wrap
  • Probe white wrap
  • Probe gray wrap
  • Probe silver wrap
  • Probe red wrap
  • Probe blue wrap
  • Probe green wrap
  • Probe yellow wrap
  • Probe orange wrap
  • Probe purple wrap
  • Probe pink wrap
  • Probe teal wrap
  • Probe brown wrap
  • Probe gold wrap
  • Probe chrome wrap
  • Probe color shift wrap
  • Probe carbon fiber wrap
  • Probe camo and patterned wrap

How much vinyl to wrap a Ford Probe

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1992–1997coupe (2 doors)180.5 in (4,585 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)
1988–1992coupe (2 doors)177.0 in (4,495 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)

Probe wrap cost factors

Probe wrap cost depends on the amount of film, the condition of the paint, and the labor for the two long doors and the front bumper. This car needs about 49 ft (15 m) of 60-inch (1.52 m) cast film for a full wrap, and more if you pick chrome or patterned film. Paint that is original or repainted can change the preparation time, so the final labor is quoted after an inspection of the car.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Probe wraps by generation

Swipe sideways. Tap a card for the full description.

Ford Probe, second generation, factory photo
Factory color shown

1992–1997 Probe coupe (second generation)

1992–1997coupe (2 doors)180.5 in (4,585 mm)

The second generation Ford Probe from 1992 to 1997 can have original or repainted paint at this age, and a test spot comes before a full wrap. A small piece of film is applied to one panel and left to sit to check how the adhesive reacts with the paint. This test also shows whether the paint is strong enough to hold the film during removal. If the panel has been repainted, the test spot is done on that exact panel before the rest of the car is wrapped.

Two long side doors: each door is one large piece of film.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Ford Probe, first generation, factory photo
Factory color shown

1988–1992 Probe coupe (first generation)

1988–1992coupe (2 doors)177.0 in (4,495 mm)

The first generation Ford Probe from 1988 to 1992 is a coupe with a length of 177.0 in (4,495 mm), which means a full wrap uses about 49 ft (15 m) of 60-inch (1.52 m) film. The number of panels is the usual set for a two-door car: hood, roof, trunk, two doors, and both bumpers. The two long side doors are each one large piece of film, so the side of the car has fewer seams than a four-door sedan.

Two long side doors: each door is one large piece of film.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Roof, hood, chrome delete and PPF on a Probe

A partial wrap on a Ford Probe covers the roof, hood, or mirror caps as individual pieces. Probe chrome delete involves covering the window trim and badges with black film to change the bright trim on the car. Paint protection film (PPF) is a clear film applied to the front end to protect the bumper, hood, and mirror caps from stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Ford Probe: body, cut-outs and film

A Ford Probe vinyl wrap follows the coupe shape and the two long doors of this two-door sports car. The first generation is 177.0 in (4,495 mm) long, the second 180.5 in (4,585 mm), so both bodies use about the same amount of film. Each long side door is one large piece of film, which reduces the number of seams on the side of the car. The roof and hood panels are straightforward to cover with cast film.

Probe wrap ideas start with the two long side doors, which are each wrapped as one large piece. The door handles, mirror caps, badges, and window trims need cut-outs or come off before film is applied. The front bumper has several openings that require relief cuts and careful heating. The rear spoiler on some trims is a separate piece that benefits from removal for a clean edge.

When you estimate how much vinyl to wrap a Probe, the amount stays consistent across generations because both coupes are close in size. The first generation is 177.0 in (4,495 mm) long and the second is 180.5 in (4,585 mm), so a full wrap of either body calls for about 49 ft (15 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, plan on about 56 ft (17 m) to match the pattern across panels.

Questions about wrapping a Ford Probe

How much vinyl does it take to wrap a Ford Probe?

A Ford Probe takes about 49 ft (15 m) of 60-inch (1.52 m) cast film for a full wrap of the newest body. If you use chrome or patterned film, the amount is about 56 ft (17 m) to allow for pattern alignment across the panels of the car.

Can I wrap only the hood or the roof of a Probe?

Yes, you can wrap only the hood or the roof of a Probe. These are common partial wrap jobs, along with mirror caps, and a chrome delete of the window trim and badges is also possible.

Is a Probe hard to wrap?

A Probe is not hard to wrap, but the two long side doors and the front bumper add work. Each door is one large piece of film that requires careful handling to avoid wrinkles, and the front bumper has openings that need relief cuts and heat. The car's length of up to 180.5 in (4,585 mm) means a full wrap uses about 49 ft (15 m) of film.

How many generations of the Probe does this page cover?

This page covers two generations of the Ford Probe. The first generation was made from 1988 to 1992 and the second from 1992 to 1997.