Wraps by car

Ford Sierra wrap

The Ford Sierra wrap uses about 49 ft (15 m) of vinyl film for the sedan and 54 ft (16.5 m) for the wagon, using 60-inch (1.52 m) cast film. This mid-size car from 1982–1993 has one generation in the catalog. A full vinyl wrap covers the entire exterior in a new color or finish.

1generations15 mof film for a full wrap

Ford Sierra, first generation, factory photo
Ford Sierra, first generation. Factory color shown.

Ford Sierra wrap colors and ideas

  • Sierra black wrap
  • Sierra white wrap
  • Sierra gray wrap
  • Sierra silver wrap
  • Sierra red wrap
  • Sierra blue wrap
  • Sierra green wrap
  • Sierra yellow wrap
  • Sierra orange wrap
  • Sierra purple wrap
  • Sierra pink wrap
  • Sierra teal wrap
  • Sierra brown wrap
  • Sierra gold wrap
  • Sierra chrome wrap
  • Sierra color shift wrap
  • Sierra carbon fiber wrap
  • Sierra camo and patterned wrap

How much vinyl to wrap a Ford Sierra

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1982–1993hatchback, sedan, wagon (3 or 4 or 5 doors)174.0 in (4,420 mm) to 177.6 in (4,510 mm)about 49 ft (15 m) for the sedan to 54 ft (16.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m)

Sierra wrap cost factors

Sierra wrap cost depends on the size of the vehicle, the film type, and the condition of the paint. The Sierra is 174.0 in (4,420 mm) to 177.6 in (4,510 mm) long, which affects material use. A wagon needs about 54 ft (16.5 m) of film, while a sedan needs about 49 ft (15 m). Chrome or patterned film can require up to about 69 ft (21 m).

  • Film for a full wrap: about 49 ft (15 m) for the sedan to 54 ft (16.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m).
  • Body: hatchback, sedan, wagon (3 or 4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Restyled in 1987: bumpers and lights differ between the versions, and so do the film cuts.

Sierra wraps by generation

Swipe sideways. Tap a card for the full description.

Ford Sierra, first generation, factory photo
Factory color shown

1982–1993 Sierra hatchback, sedan, wagon (first generation)

1982–1993hatchback, sedan, wagon (3 or 4 or 5 doors)174.0 in (4,420 mm) to 177.6 in (4,510 mm)

The first generation Ford Sierra was restyled in 1987, changing bumpers and lights. This means film cut for a pre-1987 Sierra will not fit a post-1987 model. The body styles include hatchback, sedan, and wagon with 3, 4, or 5 doors. The restyling affects the front and rear fascias, so precise fitment is important.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 49 ft (15 m) for the sedan to 54 ft (16.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m).

Roof, hood, chrome delete and PPF on a Sierra

Partial wrap options for the Ford Sierra include the roof, hood, and mirror caps. Sierra chrome delete covers window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end. These smaller jobs are a way to change the look without a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Ford Sierra: body, cut-outs and film

The Ford Sierra vinyl wrap is affected by the body styles and sizes of this car. The Sierra came as a hatchback, sedan, and wagon with 3, 4, or 5 doors. The length ranges from 174.0 in (4,420 mm) to 177.6 in (4,510 mm). A wagon needs more film than a sedan because of the larger rear area.

Sierra wrap ideas must account for parts that need cut-outs or removal during installation. The tailgate with rear glass means the film ends at the edge of the glass. Door handles, badges, and trim are removed for a clean wrap. The bumper and light shapes vary between pre- and post-1987 restyling.

How much vinyl to wrap a Sierra depends on the generation and body style. The first generation spans 1982–1993 with a restyling in 1987. The restyling changed bumpers and lights, so film cut for one version does not fit the other. Body length and style also affect the total film needed.

Questions about wrapping a Ford Sierra

How much vinyl does it take to wrap a Ford Sierra?

It takes about 49 ft (15 m) to 54 ft (16.5 m) of 60-inch (1.52 m) cast film to wrap a Ford Sierra, depending on body style. The sedan needs about 49 ft (15 m) and the wagon about 54 ft (16.5 m). Chrome or patterned film can require up to about 69 ft (21 m).

Which years of the Sierra take the same film cuts?

Sierra models from 1982 to 1987 take the same film cuts, and those from 1987 to 1993 take the same cuts. The 1987 restyling changed bumpers and lights. Pre- and post-restyling versions have different front and rear fascias.

Which Sierra body takes more film?

The Sierra wagon takes more film than the sedan or hatchback. The wagon needs about 54 ft (16.5 m) of 60-inch (1.52 m) cast film. The sedan needs about 49 ft (15 m). The hatchback falls between or near these figures.

Can I wrap only the hood or the roof of a Sierra?

Yes, you can wrap only the hood or the roof of a Sierra. A partial wrap can cover the roof, hood, or mirror caps. This is a smaller job than a full wrap. Chrome delete and PPF are also available for specific areas.