Wraps by car

Ford Windstar wrap

The Ford Windstar wrap page covers both generations of this minivan, built from 1994 to 2003. A full wrap of the newest body takes about 74 ft (22.5 m) of 60-inch (1.52 m) cast vinyl wrap film. The first generation uses slightly more film, about 76 ft (23 m), because of its longer body. These figures give a starting point for planning a wrap of this large family van.

2generations22.5 mof film for a full wrap

Ford Windstar, second generation, factory photo
Ford Windstar, second generation. Factory color shown.

Ford Windstar wrap colors and ideas

  • Windstar black wrap
  • Windstar white wrap
  • Windstar gray wrap
  • Windstar silver wrap
  • Windstar red wrap
  • Windstar blue wrap
  • Windstar green wrap
  • Windstar yellow wrap
  • Windstar orange wrap
  • Windstar purple wrap
  • Windstar pink wrap
  • Windstar teal wrap
  • Windstar brown wrap
  • Windstar gold wrap
  • Windstar chrome wrap
  • Windstar color shift wrap
  • Windstar carbon fiber wrap
  • Windstar camo and patterned wrap

How much vinyl to wrap a Ford Windstar

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1998–2003van (5 doors)200.9 in (5,103 mm)about 74 ft (22.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 87 ft (26.5 m)
1994–1998van (4 doors)201.2 in (5,110 mm)about 76 ft (23 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 87 ft (26.5 m)

Windstar wrap cost factors

Windstar wrap cost depends first on the size of the vehicle, with a full wrap taking about 74–76 ft (22.5–23 m) of film depending on the generation. The cost also changes with the film type, such as standard cast, chrome or patterned, which needs about 87 ft (26.5 m). The condition of the paint on a van from 1994–2003 can add preparation work before the wrap. The number of cut-outs, like the sliding door tracks, and the choice of a partial wrap also affect the total.

  • Film for a full wrap: about 74 ft (22.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 87 ft (26.5 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.

Windstar wraps by generation

Swipe sideways. Tap a card for the full description.

Ford Windstar, second generation, factory photo
Factory color shown

1998–2003 Windstar van (second generation)

1998–2003van (5 doors)200.9 in (5,103 mm)

The second generation Ford Windstar, built from 1998 to 2003, has sliding side doors that shape the wrap layout. The door tracks stay bare, so the film is cut along them and the panel around the track is done in separate pieces. This means an installer spends extra time trimming and tucking the vinyl around the track. The rest of the van is a straightforward five-door body with large flat panels.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 74 ft (22.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 87 ft (26.5 m).

Ford Windstar, first generation, factory photo
Factory color shown

1994–1998 Windstar van (first generation)

1994–1998van (4 doors)201.2 in (5,110 mm)

The first generation Ford Windstar, built from 1994 to 1998, often needs a paint check before a wrap. On a car of these years panels may be original or repainted, so a test spot on each panel shows whether the film will stick evenly. If the paint is weak, the wrap may lift or damage it when removed. The sliding side doors of this generation have the same track layout as the later one, with the film cut along the tracks.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 76 ft (23 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 87 ft (26.5 m).

Roof, hood, chrome delete and PPF on a Windstar

A partial wrap on a Ford Windstar can cover just the roof, the hood or the mirror caps. The roof and hood are large flat panels that are quick to wrap but still need a full roll width. A chrome delete on the window trim and badges is a smaller job that changes the look without covering the whole van. Paint protection film (PPF) on the front end is another option, using clear film to guard the hood, bumper and fenders from stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Ford Windstar: body, cut-outs and film

A Ford Windstar vinyl wrap covers a boxy, five-door or four-door minivan body that needs careful planning. The 200.9 in (5,103 mm) and 201.2 in (5,110 mm) lengths mean installers work on large panels, so film is cut in sections. The flat sides and roof are easier than curved areas, but the total area is bigger than on a car. Because the van is tall, a full wrap includes the roof, which adds material and working time.

Windstar wrap ideas start with the sliding side doors, where the door tracks stay bare and the film is cut along them. The large hood, roof and rear hatch are natural areas for a color change or a two-tone layout. The door handles and mirrors can be wrapped separately or left for contrast. For a cleaner look, some wraps include a chrome delete on the grille and window trim.

How much vinyl to wrap a Windstar depends on the generation and the film type. For the 1998–2003 body, a full wrap with standard cast film takes about 74 ft (22.5 m) of 60-inch (1.52 m) material. The 1994–1998 body takes about 76 ft (23 m) because it is a few millimeters longer and has the same tall panels. Chrome or patterned film with a directional design requires about 87 ft (26.5 m) for either generation, as more material is lost to matching patterns.

Questions about wrapping a Ford Windstar

How much vinyl does it take to wrap a Ford Windstar?

A full wrap of a Ford Windstar takes about 74 ft (22.5 m) of 60-inch (1.52 m) vinyl for the newest body. The first generation, from 1994 to 1998, takes slightly more at about 76 ft (23 m). If you use chrome or patterned film, plan for about 87 ft (26.5 m) on either generation. These figures include some waste for trimming and matching panels.

Are the sliding doors of a Windstar wrapped?

Yes, the sliding doors of a Ford Windstar are wrapped, but the door tracks stay bare. The film is cut along the tracks so the door can still open and close without rubbing. This leaves a clean line and means the area around the track is done with separate pieces of vinyl. The same method is used on both generations of the Windstar.

Can I wrap only the hood or the roof of a Windstar?

Yes, you can wrap only the hood or the roof of a Ford Windstar. The hood and roof are large flat panels that are easy to cover with one or two pieces of vinyl. A partial wrap can also include the mirror caps or a chrome delete on the window trim and badges. Paint protection film on the front end is another smaller job that protects without a full wrap.

Is a Windstar hard to wrap?

A Ford Windstar is not the hardest vehicle to wrap, but its size and sliding doors add work. The van is about 200.9 in (5,103 mm) long, so installers handle large panels and need extra material. The sliding door tracks stay bare, which means more cutting and trimming along those areas. With careful planning, a full wrap is a solid day's job for a team.