Wraps by car

Ford Zephyr wrap

The Ford Zephyr wrap page covers four generations of this mid-size car, from 1951 to 1972. A full vinyl wrap of the newest body takes about 57 ft (17.5 m) for the sedan to 62 ft (19 m) for the wagon of 60-inch (1.52 m) cast film. Chrome or patterned film raises the estimate up to about 72 ft (22 m). The page lists body styles, film amounts, and the points a wrap installer checks.

4generations17.5 mof film for a full wrap

Ford Zephyr, fourth generation, factory photo
Ford Zephyr, fourth generation. Factory color shown.

Ford Zephyr wrap colors and ideas

  • Zephyr black wrap
  • Zephyr white wrap
  • Zephyr gray wrap
  • Zephyr silver wrap
  • Zephyr red wrap
  • Zephyr blue wrap
  • Zephyr green wrap
  • Zephyr yellow wrap
  • Zephyr orange wrap
  • Zephyr purple wrap
  • Zephyr pink wrap
  • Zephyr teal wrap
  • Zephyr brown wrap
  • Zephyr gold wrap
  • Zephyr chrome wrap
  • Zephyr color shift wrap
  • Zephyr carbon fiber wrap
  • Zephyr camo and patterned wrap

How much vinyl to wrap a Ford Zephyr

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1966–1972sedan, wagon (4 doors)185.0 in (4,699 mm)about 57 ft (17.5 m) for the sedan to 62 ft (19 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 72 ft (22 m)
1962–1966sedan, wagon (4 or 5 doors)180.7 in (4,591 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)
1956–1962convertible, sedan, wagon (2 or 4 or 5 doors)178.5 in (4,534 mm)about 48 ft (14.5 m) for the convertible to 61 ft (18.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m)
1951–1956convertible, sedan (2 or 4 doors)172.0 in (4,369 mm)about 46 ft (14 m) for the convertible to 52 ft (16 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 62 ft (19 m)

Zephyr wrap cost factors

Zephyr wrap cost depends on the size of the car, the body style, and the film type. A wagon takes more film than a sedan of the same generation, and a convertible takes less. The fourth generation sedan needs about 57 ft (17.5 m) of 60-inch (1.52 m) cast film, while a second generation wagon needs up to 61 ft (18.5 m). Chrome or patterned film adds to the amount of film and the labor.

  • Film for a full wrap: about 57 ft (17.5 m) for the sedan to 62 ft (19 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 72 ft (22 m).
  • Body: sedan, wagon (4 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Zephyr wraps by generation

Swipe sideways. Tap a card for the full description.

Ford Zephyr, fourth generation, factory photo
Factory color shown

1966–1972 Zephyr sedan, wagon (fourth generation)

1966–1972sedan, wagon (4 doors)185.0 in (4,699 mm)

The fourth generation body styles are a sedan and a wagon with four doors. The style decides the panel plan and the film amount. The wagon tailgate has the rear glass in it, so the film ends at the edge of the glass. A sedan wrap is the starting point, and a wagon adds the tailgate and the roof rails.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 57 ft (17.5 m) for the sedan to 62 ft (19 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 72 ft (22 m).

Ford Zephyr, third generation, factory photo
Factory color shown

1962–1966 Zephyr sedan, wagon (third generation)

1962–1966sedan, wagon (4 or 5 doors)180.7 in (4,591 mm)

The third generation paint age matters on a car from 1962 to 1966. Panels may be original or repainted, and a test spot comes before a full wrap. The installer checks how well the film adheres to the existing paint. The body length is 180.7 in (4,591 mm) and a full wrap takes about 56 ft (17 m) of 60-inch (1.52 m) film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Ford Zephyr, second generation, factory photo
Factory color shown

1956–1962 Zephyr convertible, sedan, wagon (second generation)

1956–1962convertible, sedan, wagon (2 or 4 or 5 doors)178.5 in (4,534 mm)

The second generation open top changes how a wrap is planned. A fabric top is not wrapped and the film ends where the fabric begins. A folding hard top is wrapped as panels of its own. The convertible body takes about 48 ft (14.5 m) of 60-inch (1.52 m) film.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 48 ft (14.5 m) for the convertible to 61 ft (18.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m).

Ford Zephyr, first generation, factory photo
Factory color shown

1951–1956 Zephyr convertible, sedan (first generation)

1951–1956convertible, sedan (2 or 4 doors)172.0 in (4,369 mm)

The first generation is the shortest of the line at 172.0 in (4,369 mm). A convertible takes about 46 ft (14 m) of 60-inch (1.52 m) film and a sedan takes about 52 ft (16 m). The smaller body means fewer panels and less waste at the edges. A chrome or patterned film adds up to about 62 ft (19 m).

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 46 ft (14 m) for the convertible to 52 ft (16 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 62 ft (19 m).

Roof, hood, chrome delete and PPF on a Zephyr

Zephyr chrome delete covers the window trim and badges with black film. A partial wrap can cover the roof, hood, or mirror caps for a smaller change. Paint protection film (PPF) is clear film on the front end of the car. These jobs use less film than a full wrap and can be done in stages.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Ford Zephyr: body, cut-outs and film

A Ford Zephyr vinyl wrap changes with the body style and the size of the car. The fourth generation sedan is 185.0 in (4,699 mm) long and the wagon shares that length, so the extra film goes into the roof and tailgate. A wagon has more vertical panels than a sedan and uses more film to cover the same footprint. The range is about 57 ft (17.5 m) for the sedan to 62 ft (19 m) for the wagon.

Zephyr wrap ideas begin with the parts that need cut-outs or come off. On wagons the tailgate holds the rear glass, and the film ends at the edge of the glass. Door handles, badges, and trim come off before the film goes on. A clean panel plan keeps the lines of the car visible through the vinyl.

How much vinyl to wrap a Zephyr depends on the generation and the body style. The first generation is 172.0 in (4,369 mm) long and a sedan takes about 52 ft (16 m) of 60-inch (1.52 m) film. The fourth generation is 185.0 in (4,699 mm) and a wagon takes up to 62 ft (19 m). A convertible uses less film because the top is not wrapped.

Questions about wrapping a Ford Zephyr

How much vinyl does it take to wrap a Ford Zephyr?

A full wrap of the fourth generation Ford Zephyr takes about 57 ft (17.5 m) for the sedan to 62 ft (19 m) for the wagon of 60-inch (1.52 m) cast film. The amount depends on the body style and the film type. Chrome or patterned film raises the estimate up to about 72 ft (22 m).

Which Zephyr body takes more film?

A wagon takes more film than a sedan or a convertible. The fourth generation wagon needs up to 62 ft (19 m) while the sedan needs about 57 ft (17.5 m) of 60-inch (1.52 m) film. The tailgate and the longer roof add panels. A convertible takes the least film because the top is not wrapped.

Can I wrap only the hood or the roof of a Zephyr?

Yes, a partial wrap on a Zephyr can cover the roof, hood, or mirror caps. These jobs use less film than a full wrap. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film on the front end.

Is a Zephyr hard to wrap?

A Zephyr is not hard to wrap, but some parts add work. Wagons have a tailgate with the rear glass in it, so the film ends at the edge of the glass. Convertibles have a fabric top that is not wrapped, and the film ends where the fabric begins. The size of the car, up to 185.0 in (4,699 mm) on the fourth generation, means more panels and more time.