Wraps by car

Maserati 3200 GT wrap

This page covers vinyl wrap for the Maserati 3200 GT, a sports car produced from 1998 to 2002. It is the only generation in the catalog, offered as a two-door coupe. A full wrap of this body takes about 49 ft (15 m) of 60-inch (1.52 m) cast film. Chrome or patterned film requires about 56 ft (17 m).

1generations15 mof film for a full wrap

Maserati 3200 GT, first generation, factory photo
Maserati 3200 GT, first generation. Factory color shown.

Maserati 3200 GT wrap colors and ideas

  • Maserati 3200 GT black wrap
  • Maserati 3200 GT white wrap
  • Maserati 3200 GT gray wrap
  • Maserati 3200 GT silver wrap
  • Maserati 3200 GT red wrap
  • Maserati 3200 GT blue wrap
  • Maserati 3200 GT green wrap
  • Maserati 3200 GT yellow wrap
  • Maserati 3200 GT orange wrap
  • Maserati 3200 GT purple wrap
  • Maserati 3200 GT pink wrap
  • Maserati 3200 GT teal wrap
  • Maserati 3200 GT brown wrap
  • Maserati 3200 GT gold wrap
  • Maserati 3200 GT chrome wrap
  • Maserati 3200 GT color shift wrap
  • Maserati 3200 GT carbon fiber wrap
  • Maserati 3200 GT camo and patterned wrap

How much vinyl to wrap a Maserati 3200 GT

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1998–2002coupe (2 doors)177.6 in (4,510 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)

Maserati 3200 GT wrap cost factors

The Maserati 3200 GT wrap cost depends on the film type and the amount of disassembly required. A full wrap uses about 49 ft (15 m) of 60-inch (1.52 m) cast film, while chrome delete film needs about 56 ft (17 m). The two long doors are large single panels, which reduces seams but demands careful handling. Paint condition also matters because original or repainted panels may need extra prep.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Maserati 3200 GT wraps by generation

Swipe sideways. Tap a card for the full description.

Maserati 3200 GT, first generation, factory photo
Factory color shown

1998–2002 Maserati 3200 GT coupe (first generation)

1998–2002coupe (2 doors)177.6 in (4,510 mm)

The first generation Maserati 3200 GT was built from 1998 to 2002 with a coupe body. On a car of these years, panels may be original or repainted, so a test spot comes before a full wrap. The installer checks adhesion on each panel because old paint can be brittle. The wrap film is applied only after the paint surface is stable and clean.

Two long side doors: each door is one large piece of film.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Roof, hood, chrome delete and PPF on a Maserati 3200 GT

A partial wrap on the Maserati 3200 GT can cover the roof, hood, or mirror caps. Chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end. These smaller jobs use less material than a full wrap and leave the rest of the paint exposed.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Maserati 3200 GT: body, cut-outs and film

The Maserati 3200 GT vinyl wrap starts with a coupe body that measures 177.6 in (4,510 mm) long. Two long side doors are the largest panels, and each door takes one large piece of film. The smooth shape of the panels allows the film to lay flat without excess stretching. The hood and roof are also sizable areas that add to the total film needed.

Maserati 3200 GT wrap ideas often include treating the long side doors as single panels. The door handles and side mirrors are removed for a clean edge around each opening. The front bumper has deep air intakes that require relief cuts and careful heating. The rear bumper wraps around the taillight clusters, so the installer works the film into the recesses.

How much vinyl to wrap a Maserati 3200 GT depends on the single generation produced from 1998 to 2002. There are no changes in body dimensions across those years. The coupe body is the only style, so its 177.6 in (4,510 mm) length is constant. A full wrap of the same car will always use about 49 ft (15 m) of 60-inch (1.52 m) cast film.

Questions about wrapping a Maserati 3200 GT

How much vinyl does it take to wrap a Maserati 3200 GT?

It takes about 49 ft (15 m) of 60-inch (1.52 m) cast film to wrap a Maserati 3200 GT. If you choose chrome or patterned film, the estimate rises to about 56 ft (17 m). The extra length allows for matching patterns across the long side doors and aligning the film on the curved rear panels.

Can I wrap only the hood or the roof of a Maserati 3200 GT?

Yes, you can wrap only the hood or the roof of a Maserati 3200 GT. A partial wrap can cover the roof, hood, or mirror caps without wrapping the whole car. Chrome delete is another partial job that covers the window trim and badges with black film. Paint protection film (PPF) is also applied to just the front end as a clear film.

Is a Maserati 3200 GT hard to wrap?

Wrapping a Maserati 3200 GT adds work because of its large door panels and overall size. The two long side doors are each one large piece of film, which is harder to position without creases. At 177.6 in (4,510 mm) long, the coupe body requires more film and more time than a smaller car. The rear bumper and front air intakes also need careful relief cuts.

How many generations of the Maserati 3200 GT does this page cover?

This page covers one generation of the Maserati 3200 GT. The model was produced from 1998 to 2002 as the first generation. There are no other generations in the catalog.