Wraps by car

Maserati Shamal wrap

The Maserati Shamal wrap page covers this 1989–1995 two-door coupe, the single generation in the catalog. A full vinyl wrap of the Shamal uses about 44 ft (13.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film needs roughly 51 ft (15.5 m) because of the extra material for trimming and alignment.

1generations13.5 mof film for a full wrap

Maserati Shamal, first generation, factory photo
Maserati Shamal, first generation. Factory color shown.

Maserati Shamal wrap colors and ideas

  • Shamal black wrap
  • Shamal white wrap
  • Shamal gray wrap
  • Shamal silver wrap
  • Shamal red wrap
  • Shamal blue wrap
  • Shamal green wrap
  • Shamal yellow wrap
  • Shamal orange wrap
  • Shamal purple wrap
  • Shamal pink wrap
  • Shamal teal wrap
  • Shamal brown wrap
  • Shamal gold wrap
  • Shamal chrome wrap
  • Shamal color shift wrap
  • Shamal carbon fiber wrap
  • Shamal camo and patterned wrap

How much vinyl to wrap a Maserati Shamal

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1989–1995coupe (2 doors)161.4 in (4,100 mm)about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m)

Shamal wrap cost factors

Shamal wrap cost depends on paint condition, panel size and the film type you choose. The car’s 161.4 in (4,100 mm) length means a full wrap needs about 44 ft (13.5 m) of 60-inch film. A chrome or patterned film raises the amount to about 51 ft (15.5 m) and adds labor for matching the pattern.

  • Film for a full wrap: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Shamal wraps by generation

Swipe sideways. Tap a card for the full description.

Maserati Shamal, first generation, factory photo
Factory color shown

1989–1995 Shamal coupe (first generation)

1989–1995coupe (2 doors)161.4 in (4,100 mm)

The first generation Maserati Shamal is a sports car built as a two-door coupe from 1989 to 1995. Paint age affects the wrap plan, because panels may be original or repainted. A test spot comes before a full wrap to check that the film adheres without lifting old paint.

Two long side doors: each door is one large piece of film.

Film: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m).

Roof, hood, chrome delete and PPF on a Shamal

A partial wrap on a Maserati Shamal can cover the roof, hood or mirror caps as separate jobs. A chrome delete turns the window trim and badges black with film. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Maserati Shamal: body, cut-outs and film

A Maserati Shamal vinyl wrap works with one body style: a coupe with two long side doors. The car is 161.4 in (4,100 mm) long, which is compact enough for a two-person install. Each door is one large piece of film, so the wrap needs careful bridging and low-tack application.

Shamal wrap ideas start with the two long side doors, each covered as one large piece of film. The door handles, mirrors, badges and window trims are removed or cut around for a clean edge. The deep front and rear bumpers need inlays and relief cuts to follow the curves without lifting.

How much vinyl to wrap a Shamal stays the same across its 1989–1995 production run, because the body shape did not change. A coupe of these years has no long roof rails or extra panels to measure. The only real variable is paint condition, not a different body style.

Questions about wrapping a Maserati Shamal

How much vinyl does it take to wrap a Maserati Shamal?

It takes about 44 ft (13.5 m) of 60-inch (1.52 m) cast film to wrap a Maserati Shamal. For chrome or patterned film the estimate is about 51 ft (15.5 m). These figures cover the full body of the coupe.

Can I wrap only the hood or the roof of a Shamal?

You can wrap only the hood or the roof of a Shamal as a partial wrap. The roof, hood and mirror caps are the main partial wrap jobs on this car. A partial wrap uses less film than a full wrap and can be done panel by panel.

Is a Shamal hard to wrap?

A Shamal is not a simple wrap because of its two long side doors, each one large piece of film. The 161.4 in (4,100 mm) body has deep front and rear bumpers that need relief cuts. Door handles, mirrors and badges must be removed or cut around for a clean finish.

How many generations of the Shamal does this page cover?

This page covers one generation of the Maserati Shamal. The catalog lists the first generation, built from 1989 to 1995 as a two-door coupe.