Wraps by car

Maserati Indy wrap

The Maserati Indy wrap page covers the 1969–1974 first-generation sports car, the only generation in this catalog. A full vinyl wrap on this coupe takes about 49 ft (15 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds roughly 8 ft (2.5 m) to the layout.

1generations15 mof film for a full wrap

Maserati Indy, first generation, factory photo
Maserati Indy, first generation. Factory color shown.

Maserati Indy wrap colors and ideas

  • Indy black wrap
  • Indy white wrap
  • Indy gray wrap
  • Indy silver wrap
  • Indy red wrap
  • Indy blue wrap
  • Indy green wrap
  • Indy yellow wrap
  • Indy orange wrap
  • Indy purple wrap
  • Indy pink wrap
  • Indy teal wrap
  • Indy brown wrap
  • Indy gold wrap
  • Indy chrome wrap
  • Indy color shift wrap
  • Indy carbon fiber wrap
  • Indy camo and patterned wrap

How much vinyl to wrap a Maserati Indy

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1969–1974coupe (2 doors)186.6 in (4,740 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)

Indy wrap cost factors

Indy wrap cost depends mainly on film area, and a full wrap of this 186.6 in (4,740 mm) coupe calls for about 49 ft (15 m) of cast film. Film choice changes the number, with chrome or patterned films raising the requirement to about 57 ft (17.5 m). The final figure also reflects the paint condition under the film and the time spent on the long doors and trim.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Indy wraps by generation

Swipe sideways. Tap a card for the full description.

Maserati Indy, first generation, factory photo
Factory color shown

1969–1974 Indy coupe (first generation)

1969–1974coupe (2 doors)186.6 in (4,740 mm)

The first-generation Maserati Indy from 1969 to 1974 is a two-door coupe that spans 186.6 in (4,740 mm). On a car of these years panels may be original or repainted, and a test spot comes before a full wrap to check how the paint will hold the film.

Two long side doors: each door is one large piece of film.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on an Indy

An Indy chrome delete covers the window trim and badges with black film and leaves the body color unchanged. A partial wrap on this coupe can be a clean way to change the roof, hood or mirror caps without covering the full 186.6 in (4,740 mm) body. Paint protection film (PPF) is also an option for the front end only, laid as a clear film over the nose and forward panels.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Maserati Indy: body, cut-outs and film

The Maserati Indy vinyl wrap is shaped by a two-door coupe body that measures 186.6 in (4,740 mm) long. Each of the two long side doors is a single large piece of film, so the sides need clean, even tension. The modest number of panels for a car this size keeps the film plan direct.

Indy wrap ideas start with the long doors, which are wrapped as one piece per side without splice lines. The window trim and badges are the parts a wrapping shop would tape off or remove for a chrome delete. The roof and hood are also simple flat sections that suit a contrasting film.

How much vinyl to wrap an Indy depends on the 1969–1974 first generation body, which stayed at 186.6 in (4,740 mm) throughout. Because there is only one body style, the full wrap estimate of about 49 ft (15 m) of 60-inch (1.52 m) film holds for every production year.

Questions about wrapping a Maserati Indy

How much vinyl does it take to wrap a Maserati Indy?

It takes about 49 ft (15 m) of 60-inch (1.52 m) cast vinyl to wrap a Maserati Indy. That figure covers the full two-door coupe body from 1969 to 1974. If the wrap uses chrome or patterned film, plan for about 57 ft (17.5 m).

Can I wrap only the hood or the roof of an Indy?

Yes, a partial wrap on an Indy can cover just the hood or the roof. The coupe body also allows separate mirror caps or a chrome delete on the window trim and badges. A full wrap is not required to change one section of this car.

Is an Indy hard to wrap?

An Indy is not especially hard to wrap, but its two long side doors take one large piece of film each and need care on a 186.6 in (4,740 mm) body. The door length is the main challenge, while the low number of panels helps the rest of the job stay simple.

How many generations of the Indy does this page cover?

This page covers one generation of the Maserati Indy, the first generation built from 1969 to 1974. There are no later generations of this model in the catalog.