Wraps by car

Maserati Khamsin wrap

A Maserati Khamsin wrap covers the 1974–1982 sports car with vinyl wrap film on every painted panel. The page holds one generation of the Khamsin, the original coupe produced from 1974 to 1982. A full wrap of this body takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds roughly 54 ft (16.5 m) to the job.

1generations14.5 mof film for a full wrap

Maserati Khamsin, first generation, factory photo
Maserati Khamsin, first generation. Factory color shown.

Maserati Khamsin wrap colors and ideas

  • Khamsin black wrap
  • Khamsin white wrap
  • Khamsin gray wrap
  • Khamsin silver wrap
  • Khamsin red wrap
  • Khamsin blue wrap
  • Khamsin green wrap
  • Khamsin yellow wrap
  • Khamsin orange wrap
  • Khamsin purple wrap
  • Khamsin pink wrap
  • Khamsin teal wrap
  • Khamsin brown wrap
  • Khamsin gold wrap
  • Khamsin chrome wrap
  • Khamsin color shift wrap
  • Khamsin carbon fiber wrap
  • Khamsin camo and patterned wrap

How much vinyl to wrap a Maserati Khamsin

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1974–1982coupe (2 doors)173.2 in (4,400 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m)

Khamsin wrap cost factors

Khamsin wrap cost depends on the film area, the film type, and the condition of the paint. The car is 173.2 in (4,400 mm) long and takes about 48 ft (14.5 m) of 60-inch (1.52 m) film. A cast film installs more cleanly on the curved panels of this 1970s coupe. The cost also changes with the amount of disassembly for parts like the bumpers and trim.

  • Film for a full wrap: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Khamsin wraps by generation

Swipe sideways. Tap a card for the full description.

Maserati Khamsin, first generation, factory photo
Factory color shown

1974–1982 Khamsin coupe (first generation)

1974–1982coupe (2 doors)173.2 in (4,400 mm)

The first generation Maserati Khamsin of 1974 to 1982 often has paint age issues, with panels that may be original or repainted. A test spot tells the installer how the vinyl adheres to the old paint. The body is a coupe that is 173.2 in (4,400 mm) long, and the full wrap takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. With chrome or patterned film, the job uses about 54 ft (16.5 m).

Two long side doors: each door is one large piece of film.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).

Roof, hood, chrome delete and PPF on a Khamsin

A partial wrap on a Maserati Khamsin can cover the roof, hood, or mirror caps as smaller jobs. Khamsin chrome delete wraps the window trim and badges with black film to darken the brightwork. Paint protection film (PPF) is a clear film on the front end that protects the nose from stone chips. These jobs use less film than a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Maserati Khamsin: body, cut-outs and film

A Maserati Khamsin vinyl wrap suits the single body style of this car, a two-door coupe that is 173.2 in (4,400 mm) long. The side panels are straightforward, with two long doors that are each one large piece of film. The short length keeps the wrap area close to a modern compact car. An installer can lay the main panels with minimal seams.

Khamsin wrap ideas start with the long side doors, because each door is one large piece of film and needs a clean, low-seam install. The door handles, side mirrors, and window trim have to be cut out or removed. The front and rear bumpers are separate pieces that are wrapped off the car. The badges and the side vents are small details that take extra time.

How much vinyl to wrap a Khamsin depends on the generation, and this page covers the only generation made from 1974 to 1982. The body is the same coupe in every year of production, so the film count is the same for all cars. The estimate is about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. If you add chrome or patterned film, the total rises to about 54 ft (16.5 m).

Questions about wrapping a Maserati Khamsin

How much vinyl does it take to wrap a Maserati Khamsin?

A full wrap of a Maserati Khamsin takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, the estimate is about 54 ft (16.5 m). The coupe body is 173.2 in (4,400 mm) long and has large door panels that use the film efficiently.

Can I wrap only the hood or the roof of a Khamsin?

Yes, a partial wrap on a Khamsin often covers the hood or the roof. The shop wraps mirror caps as well, and a chrome delete of the window trim and badges is a common small job. Paint protection film (PPF) on the front end is another option that leaves the rest of the car original.

Is a Khamsin hard to wrap?

A Khamsin is not an easy wrap because each long side door is one large piece of film that needs a careful install. The 1974–1982 body is 173.2 in (4,400 mm) long, so the panels are smaller than on a modern grand tourer. The wrap_facts note that the doors are the main challenge, and the old paint may need test spots before the full job.

How many generations of the Khamsin does this page cover?

This page covers one generation of the Maserati Khamsin, the coupe made from 1974 to 1982. The catalog has no other generations for this model. The full wrap estimate for that generation is about 48 ft (14.5 m) of 60-inch (1.52 m) cast film.