Wraps by car

Maserati Quattroporte wrap

This page covers the Maserati Quattroporte wrap across its six production generations. The Quattroporte has always been a four-door luxury sedan, from the second generation of 1974 to the current sixth generation. A full vinyl wrap of the newest Quattroporte body takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film on the same body needs about 74 ft (22.5 m).

6generations19.5 mof film for a full wrap

Maserati Quattroporte, sixth generation, factory photo
Maserati Quattroporte, sixth generation. Factory color shown.

Maserati Quattroporte wrap colors and ideas

  • Quattroporte black wrap
  • Quattroporte white wrap
  • Quattroporte gray wrap
  • Quattroporte silver wrap
  • Quattroporte red wrap
  • Quattroporte blue wrap
  • Quattroporte green wrap
  • Quattroporte yellow wrap
  • Quattroporte orange wrap
  • Quattroporte purple wrap
  • Quattroporte pink wrap
  • Quattroporte teal wrap
  • Quattroporte brown wrap
  • Quattroporte gold wrap
  • Quattroporte chrome wrap
  • Quattroporte color shift wrap
  • Quattroporte carbon fiber wrap
  • Quattroporte camo and patterned wrap

How much vinyl to wrap a Maserati Quattroporte

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2012–nowsedan (4 doors)207.2 in (5,262 mm) to 207.2 in (5,264 mm)about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m)
2003–2012sedan (4 doors)198.9 in (5,052 mm) to 200.7 in (5,097 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)
1994–2000sedan (4 doors)179.1 in (4,550 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)
1979–1990sedan (4 doors)193.3 in (4,910 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)
1974–1978sedan (4 doors)——
1963–1969sedan (4 doors)——

Quattroporte wrap cost factors

Quattroporte wrap cost depends on the film area, the film type, and the work the body needs. A full wrap of the sixth generation uses about 64 ft (19.5 m) of cast film, while the fifth generation uses about 56 ft (17 m). Chrome or patterned film adds material because the pattern must be matched across panels. The bumpers have sensors and cameras that require extra cutting time.

  • Film for a full wrap: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).
  • Body: sedan (4 doors).
  • Some trims have a sunroof: the roof film is cut around its opening.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Restyled in 2016, 2020: bumpers and lights differ between the versions, and so do the film cuts.

Quattroporte wraps by generation

Swipe sideways. Tap a card for the full description.

Maserati Quattroporte, sixth generation, factory photo
Factory color shown

2012–now Quattroporte sedan (sixth generation)

2012–nowsedan (4 doors)207.2 in (5,262 mm) to 207.2 in (5,264 mm)

The sixth generation Maserati Quattroporte was built from 2012 onward and restyled in 2016 and 2020. The restylings changed the bumpers and lights, so film cut for one version does not fit the other. The body length stayed between 207.2 in (5,262 mm) and 207.2 in (5,264 mm). A full wrap of this body takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film.

Some trims have a sunroof: the roof film is cut around its opening.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Film: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).

Maserati Quattroporte, fifth generation, factory photo
Factory color shown

2003–2012 Quattroporte sedan (fifth generation)

2003–2012sedan (4 doors)198.9 in (5,052 mm) to 200.7 in (5,097 mm)

The fifth generation Maserati Quattroporte was produced from 2003 to 2012. Paint age on a car of these years is a key point, because panels may be original or repainted. A test spot before a full wrap shows how the film adheres to the surface. This generation measures between 198.9 in (5,052 mm) and 200.7 in (5,097 mm) and needs about 56 ft (17 m) of cast film.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).

Maserati Quattroporte, fourth generation, factory photo
Factory color shown

1994–2000 Quattroporte sedan (fourth generation)

1994–2000sedan (4 doors)179.1 in (4,550 mm)

The fourth generation Maserati Quattroporte was made from 1994 to 2000. Its length of 179.1 in (4,550 mm) makes it the shortest Quattroporte in this catalog. The four-door sedan body has a moderate number of panels, so the film requirement is about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film would need about 64 ft (19.5 m) on this body.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Maserati Quattroporte, third generation, factory photo
Factory color shown

1979–1990 Quattroporte sedan (third generation)

1979–1990sedan (4 doors)193.3 in (4,910 mm)

The third generation Maserati Quattroporte was built from 1979 to 1990. At 193.3 in (4,910 mm) long, it sits between the fourth and fifth generations in size. The four-door sedan body means a full wrap is spread over many flat and curved panels. A wrapper would plan on about 52 ft (16 m) of 60-inch (1.52 m) cast film for this car.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Maserati Quattroporte, second generation, factory photo
Factory color shown

1974–1978 Quattroporte sedan (second generation)

1974–1978sedan (4 doors)

The second generation Maserati Quattroporte was produced from 1974 to 1978. Its four-door sedan body is large for a car of that era, though the catalog has no film estimate for it. The number of panels is the same as later sedans, so the material need is in a similar range. A wrapper measures each panel individually before ordering film for this generation.

Maserati Quattroporte, first generation, factory photo
Factory color shown

1963–1969 Quattroporte sedan (first generation)

1963–1969sedan (4 doors)

Roof, hood, chrome delete and PPF on a Quattroporte

A partial wrap on a Maserati Quattroporte can cover the roof, hood, or mirror caps. A Quattroporte chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips. These smaller jobs use less material than a full wrap and can be done without removing the bumpers.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Maserati Quattroporte: body, cut-outs and film

A Maserati Quattroporte vinyl wrap is planned around its four-door sedan body and its length. The sixth generation measures 207.2 in (5,262 mm) to 207.2 in (5,264 mm), so it is one of the longer cars a wrapper handles. The fifth generation is between 198.9 in (5,052 mm) and 200.7 in (5,097 mm) long. The fourth generation is 179.1 in (4,550 mm) long and the third is 193.3 in (4,910 mm).

Quattroporte wrap ideas start with the cut-outs this car needs on every trim. Parking sensors in the bumpers require the film to be cut around each sensor. Cameras in the body also need precise cut-outs around each lens. On some trims with a sunroof, the roof film is cut around its opening. On the fifth generation every trim has fog lamps in the front bumper that need cut-outs.

How much vinyl to wrap a Quattroporte depends on which generation you have. The sixth generation uses about 64 ft (19.5 m) of 60-inch (1.52 m) cast film. The fifth generation needs about 56 ft (17 m) and the fourth about 51 ft (15.5 m). The third generation takes about 52 ft (16 m) of the same width film.

Questions about wrapping a Maserati Quattroporte

How much vinyl does it take to wrap a Maserati Quattroporte?

A full wrap of the current generation Maserati Quattroporte takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, plan on about 74 ft (22.5 m). These figures come from the body length of 207.2 in (5,262 mm) to 207.2 in (5,264 mm) and the number of panels.

Can the roof of a Quattroporte be wrapped?

Yes, the roof of a Quattroporte can be wrapped on its own. On the sixth generation some trims have a sunroof, so the film is cut around its opening. The roof is a large single panel that takes less film than a full body wrap.

Which years of the Quattroporte take the same film cuts?

Film cuts match within each generation and restyle of the Quattroporte. The sixth generation was built from 2012, then restyled in 2016 and 2020, so each of those three versions has its own cuts. The fifth generation ran from 2003 to 2012 with a restyle in 2008. The fourth generation was 1994 to 2000, the third 1979 to 1990, and the second 1974 to 1978.

Can I wrap only the hood or the roof of a Quattroporte?

Yes, you can wrap only the hood or only the roof of a Quattroporte as a partial wrap. A partial wrap can also cover the mirror caps, while a chrome delete covers the window trim and badges. Paint protection film (PPF) is clear film applied to the front end. These jobs use less material than a full wrap.