Wraps by car

Maserati 420 wrap

This page covers the Maserati 420 wrap, the single generation produced from 1985 to 1994. The first generation Maserati 420 is a full-size sedan with four doors. A full vinyl wrap of this body takes about 49 ft (15 m) of 60-inch (1.52 m) cast film.

1generations15 mof film for a full wrap

Maserati 420, first generation, factory photo
Maserati 420, first generation. Factory color shown.

Maserati 420 wrap colors and ideas

  • Maserati 420 black wrap
  • Maserati 420 white wrap
  • Maserati 420 gray wrap
  • Maserati 420 silver wrap
  • Maserati 420 red wrap
  • Maserati 420 blue wrap
  • Maserati 420 green wrap
  • Maserati 420 yellow wrap
  • Maserati 420 orange wrap
  • Maserati 420 purple wrap
  • Maserati 420 pink wrap
  • Maserati 420 teal wrap
  • Maserati 420 brown wrap
  • Maserati 420 gold wrap
  • Maserati 420 chrome wrap
  • Maserati 420 color shift wrap
  • Maserati 420 carbon fiber wrap
  • Maserati 420 camo and patterned wrap

How much vinyl to wrap a Maserati 420

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1985–1994sedan (4 doors)173.2 in (4,400 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m)

Maserati 420 wrap cost factors

The Maserati 420 wrap cost depends on the condition of a car built from 1985 to 1994. Original paint may be faded or panels may have been repainted, so a test spot comes before the wrap. The number of panels with damage and the time to correct them affect the labor. The choice of film type also changes the total, with chrome or patterned film needing about 61 ft (18.5 m).

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).
  • Body: sedan (4 doors).

Maserati 420 wraps by generation

Swipe sideways. Tap a card for the full description.

Maserati 420, first generation, factory photo
Factory color shown

1985–1994 Maserati 420 sedan (first generation)

1985–1994sedan (4 doors)173.2 in (4,400 mm)

The first generation Maserati 420 was built from 1985 to 1994 as a four-door sedan 173.2 in (4,400 mm) long. Paint age matters on a car of these years, since panels may be original or repainted. A test spot on the paint comes before a full wrap to check adhesion and condition.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).

Roof, hood, chrome delete and PPF on a Maserati 420

A Maserati 420 chrome delete covers the window trim and badges with black film, and a partial wrap can do the roof, hood or mirror caps. Paint protection film (clear film) on the front end is another smaller job for this car. Each of these options uses less film than a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Maserati 420: body, cut-outs and film

The Maserati 420 vinyl wrap must follow the sedan body, which is 173.2 in (4,400 mm) long. The only body style is a four-door sedan, so the film estimate stays the same across the generation. A full wrap has no long roof or large flat panels to simplify the job.

Maserati 420 wrap ideas start with the parts that need cut-outs or come off. The door handles, badges and trim pieces are removed before the film is applied. The mirrors and bumpers are wrapped separately for a clean finish.

To work out how much vinyl to wrap a Maserati 420, you only need the first generation panel set. The car did not change in length or door count during its 1985 to 1994 run. The same 49 ft (15 m) of 60-inch (1.52 m) film covers every year.

Questions about wrapping a Maserati 420

How much vinyl does it take to wrap a Maserati 420?

It takes about 49 ft (15 m) of 60-inch (1.52 m) cast film to wrap a Maserati 420. For chrome or patterned film, the estimate rises to about 61 ft (18.5 m).

Can I wrap only the hood or the roof of a Maserati 420?

Yes, you can wrap only the hood or the roof of a Maserati 420. A partial wrap on this car can cover the roof, hood, mirror caps, or you can choose a chrome delete on the window trim and badges.

Is a Maserati 420 hard to wrap?

A Maserati 420 is not especially hard to wrap, but the sedan is a full-size car at 173.2 in (4,400 mm) long. The main added work is careful removal of trim and badges before the film goes on.

How many generations of the Maserati 420 does this page cover?

This page covers one generation of the Maserati 420, produced from 1985 to 1994.