Wraps by car

Maserati MC12 wrap

The Maserati MC12 wrap is a full vinyl wrap on a limited-production sports car built from 2004 to 2006. This page covers the single generation of the MC12, a two-door coupe that is 202.5 in (5,143 mm) long. A full wrap of the newest body takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds roughly 7 ft (2 m) to that estimate.

1generations17.5 mof film for a full wrap

Maserati MC12, first generation, factory photo
Maserati MC12, first generation. Factory color shown.

Maserati MC12 wrap colors and ideas

  • Maserati MC12 black wrap
  • Maserati MC12 white wrap
  • Maserati MC12 gray wrap
  • Maserati MC12 silver wrap
  • Maserati MC12 red wrap
  • Maserati MC12 blue wrap
  • Maserati MC12 green wrap
  • Maserati MC12 yellow wrap
  • Maserati MC12 orange wrap
  • Maserati MC12 purple wrap
  • Maserati MC12 pink wrap
  • Maserati MC12 teal wrap
  • Maserati MC12 brown wrap
  • Maserati MC12 gold wrap
  • Maserati MC12 chrome wrap
  • Maserati MC12 color shift wrap
  • Maserati MC12 carbon fiber wrap
  • Maserati MC12 camo and patterned wrap

How much vinyl to wrap a Maserati MC12

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2004–2006coupe (2 doors)202.5 in (5,143 mm)about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)

Maserati MC12 wrap cost factors

Maserati MC12 wrap cost depends on the amount of film, the body panels that come off, and the condition of the paint on a car from 2004 to 2006. The coupe uses about 57 ft (17.5 m) of 60-inch (1.52 m) cast film for a standard color change, and more for chrome or patterned film. The two long side doors are each one large piece, so an installer spends extra time on those panels. The final cost also changes with the number of cut-outs and whether any panels need repair before wrapping.

  • Film for a full wrap: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Maserati MC12 wraps by generation

Swipe sideways. Tap a card for the full description.

Maserati MC12, first generation, factory photo
Factory color shown

2004–2006 Maserati MC12 coupe (first generation)

2004–2006coupe (2 doors)202.5 in (5,143 mm)

The first generation Maserati MC12 from 2004 to 2006 is a two-door coupe with a length of 202.5 in (5,143 mm). Paint age matters on a car of these years, because panels may be original or repainted after track use. A test spot before a full wrap shows whether the film will adhere evenly to the surface. When the paint is sound, the coupe takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film.

Two long side doors: each door is one large piece of film.

Film: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on a Maserati MC12

A partial wrap on a Maserati MC12 is often limited to the roof, hood, and mirror caps for a color accent. A chrome delete covers window trim and badges with black film to change the bright work. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These smaller jobs use less film than a full wrap, and each can be done without covering the whole car.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Maserati MC12: body, cut-outs and film

A Maserati MC12 vinyl wrap starts with a coupe body that is 202.5 in (5,143 mm) long, so every panel is large and the film has to be stretched over long curves. The two long side doors are each covered with one large piece of film, which keeps seams away from the middle of the car. Because the MC12 is a wide, low car, the lower rockers and rear bumper need careful trimming to follow the body lines. The size of the car means a full wrap uses about 57 ft (17.5 m) of 60-inch (1.52 m) film.

Maserati MC12 wrap ideas work best when the installer plans for the few cut-outs and removable parts. The door handles, side mirrors, and front grille need to be either cut out or removed before film is applied. The long side doors are each wrapped as one piece, so the installer must position the film without bubbles or wrinkles over a very large flat area. The engine cover on the rear deck may also be removed for a cleaner wrap around its edges.

How much vinyl to wrap a Maserati MC12 depends on the one generation covered here. The 2004–2006 coupe is the only body style, so the estimate of 57 ft (17.5 m) of 60-inch (1.52 m) cast film applies to every MC12 in this catalog. Paint age can differ between cars from these years, and a test spot before a full wrap helps decide if the surface is ready. For chrome or patterned film, plan for about 64 ft (19.5 m).

Questions about wrapping a Maserati MC12

How much vinyl does it take to wrap a Maserati MC12?

A full vinyl wrap on a Maserati MC12 takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film. This estimate covers the single coupe body style from 2004 to 2006. If you choose chrome or patterned film, the figure rises to about 64 ft (19.5 m). The car is 202.5 in (5,143 mm) long, which explains the large amount of film.

Can I wrap only the hood or the roof of a Maserati MC12?

Yes, you can wrap only the hood or only the roof of a Maserati MC12. A partial wrap on this model is often done on the roof, hood, and mirror caps. Chrome delete is another option that covers window trim and badges rather than a large panel. These jobs use less film than a full wrap and leave most of the original color visible.

Is a Maserati MC12 hard to wrap?

A Maserati MC12 is not the easiest car to wrap, because it is a wide, low coupe at 202.5 in (5,143 mm) long with large curved panels. The two long side doors each need one large piece of film, which takes patience to apply without creases. The low front end and rear diffuser also force the installer to work close to the ground. Still, an experienced shop can handle these challenges with careful trimming.

How many generations of the Maserati MC12 does this page cover?

This page covers one generation of the Maserati MC12, the first generation built from 2004 to 2006. That generation is a two-door coupe with a length of 202.5 in (5,143 mm). A full wrap of this body takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film. No other generations of the MC12 are included in the catalog.