Wraps by car

Maserati Bora wrap

The Maserati Bora wrap page covers the first generation of this sports car, produced from 1971 to 1980. A full vinyl wrap of the newest body takes about 41 ft (12.5 m) of 60-inch (1.52 m) cast film. The Bora was built only as a two-door coupe with a length of 170.7 in (4,335 mm). This guide explains the wrap process for this classic Maserati.

1generations12.5 mof film for a full wrap

Maserati Bora, first generation, factory photo
Maserati Bora, first generation. Factory color shown.

Maserati Bora wrap colors and ideas

  • Bora black wrap
  • Bora white wrap
  • Bora gray wrap
  • Bora silver wrap
  • Bora red wrap
  • Bora blue wrap
  • Bora green wrap
  • Bora yellow wrap
  • Bora orange wrap
  • Bora purple wrap
  • Bora pink wrap
  • Bora teal wrap
  • Bora brown wrap
  • Bora gold wrap
  • Bora chrome wrap
  • Bora color shift wrap
  • Bora carbon fiber wrap
  • Bora camo and patterned wrap

How much vinyl to wrap a Maserati Bora

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1971–1980coupe (2 doors)170.7 in (4,335 mm)about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m)

Bora wrap cost factors

Bora wrap cost depends on the car's age, the film type, and the amount of disassembly. A 1971–1980 Bora may have original or repainted panels, and a test spot is needed before a full wrap. The number of pieces to remove, like the door handles and mirrors, also changes the labor. The size of the car calls for about 41 ft (12.5 m) of film for a standard color change.

  • Film for a full wrap: about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Bora wraps by generation

Swipe sideways. Tap a card for the full description.

Maserati Bora, first generation, factory photo
Factory color shown

1971–1980 Bora coupe (first generation)

1971–1980coupe (2 doors)170.7 in (4,335 mm)

The first generation Maserati Bora covers production years 1971 to 1980. On a car of these years, panels may be original or repainted, so a test spot comes before a full wrap. The coupe body has two long side doors that are each wrapped as one large piece of film. The car's length of 170.7 in (4,335 mm) sets the baseline for film estimates.

Two long side doors: each door is one large piece of film.

Film: about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).

Roof, hood, chrome delete and PPF on a Bora

A partial wrap on a Maserati Bora can cover the roof, hood, or mirror caps. A Bora chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end of the car to guard against stone chips. These smaller jobs use less film than a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Maserati Bora: body, cut-outs and film

A Maserati Bora vinyl wrap suits the coupe's two long side doors, each of which is one large piece of film. The car's overall length of 170.7 in (4,335 mm) means a standard roll width of 60 inches (1.52 m) covers most panels without seams. The single body style of the Bora keeps the wrap layout simple. No extra film is needed for different roof or door configurations.

Bora wrap ideas often focus on the side doors and the front end. The two long side doors are each wrapped as one large piece, so seams are almost invisible. For a clean install, the door handles and mirrors come off before the film goes on. Window trim and badges are the main parts that need cut-outs for a chrome delete.

To know how much vinyl to wrap a Bora, count the same panels for every car of this model. The Bora has one generation, so a full wrap needs about 41 ft (12.5 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, the estimate rises to about 54 ft (16.5 m). The two long side doors use a large part of that film.

Questions about wrapping a Maserati Bora

How much vinyl does it take to wrap a Maserati Bora?

A full wrap of a Maserati Bora takes about 41 ft (12.5 m) of 60-inch (1.52 m) cast film. This estimate is for the newest body of the first generation, which is a two-door coupe. The figure covers the two long side doors, each wrapped as one large piece.

Can I wrap only the hood or the roof of a Bora?

Yes, you can wrap only the hood or the roof of a Bora. A partial wrap on this car can cover the roof, hood, or mirror caps. The two long side doors are not part of these smaller jobs. This option uses less film than a full color change wrap.

Is a Bora hard to wrap?

A Bora is not the easiest car to wrap because of its age and two long side doors. Each door is one large piece of film, which takes care to lay without wrinkles. The car's 170.7 in (4,335 mm) length means a standard 60-inch (1.52 m) roll still needs careful handling on the doors. Panels that are original or repainted must be tested before the full wrap.

How many generations of the Bora does this page cover?

This page covers one generation of the Maserati Bora, produced from 1971 to 1980. The car came only as a coupe with two long side doors. There are no additional generations in the catalog for this model.