Wraps by car

Maserati MCPura wrap

The Maserati MCPura wrap page covers the first generation of this sports car, produced from 2025 onward. A full vinyl wrap of the newest body takes about 44 ft (13.5 m) for the convertible and up to 51 ft (15.5 m) for the coupe. The car is offered as a convertible and a coupe, both with two doors. The figures assume 60-inch (1.52 m) cast film, with chrome or patterned film needing up to about 59 ft (18 m).

1generations15.5 mof film for a full wrap

Maserati MCPura, first generation, factory photo
Maserati MCPura, first generation. Factory color shown.

Maserati MCPura wrap colors and ideas

  • MCPura black wrap
  • MCPura white wrap
  • MCPura gray wrap
  • MCPura silver wrap
  • MCPura red wrap
  • MCPura blue wrap
  • MCPura green wrap
  • MCPura yellow wrap
  • MCPura orange wrap
  • MCPura purple wrap
  • MCPura pink wrap
  • MCPura teal wrap
  • MCPura brown wrap
  • MCPura gold wrap
  • MCPura chrome wrap
  • MCPura color shift wrap
  • MCPura carbon fiber wrap
  • MCPura camo and patterned wrap

How much vinyl to wrap a Maserati MCPura

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2025–nowconvertible, coupe (2 doors)183.8 in (4,669 mm)about 44 ft (13.5 m) for the convertible to 51 ft (15.5 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 59 ft (18 m)

MCPura wrap cost factors

MCPura wrap cost depends on the body style, with the convertible needing about 44 ft (13.5 m) and the coupe up to 51 ft (15.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises the amount to about 59 ft (18 m), and a two-door sports car with long doors means large panels that take time to lay correctly. The number of cut-outs and trim pieces removed also changes the labor. The final cost is set by film choice, film amount, and the time spent on the 183.8 in (4,669 mm) body.

  • Film for a full wrap: about 44 ft (13.5 m) for the convertible to 51 ft (15.5 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 59 ft (18 m).
  • Body: convertible, coupe (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • Two long side doors: each door is one large piece of film.

MCPura wraps by generation

Swipe sideways. Tap a card for the full description.

Maserati MCPura, first generation, factory photo
Factory color shown

2025–now MCPura convertible, coupe (first generation)

2025–nowconvertible, coupe (2 doors)183.8 in (4,669 mm)

The first generation Maserati MCPura has an open top on the convertible, and that top is not wrapped. A fabric top is left as it is, with the wrap film ending exactly where the top begins. If the car has a folding hard top, that top is wrapped as separate panels of its own. This keeps the wrap edge clean and avoids film lifting at the roof line.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Film: about 44 ft (13.5 m) for the convertible to 51 ft (15.5 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 59 ft (18 m).

Roof, hood, chrome delete and PPF on an MCPura

MCPura chrome delete covers the window trim and badges with black film, and a partial wrap can cover the roof, hood, or mirror caps. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These jobs use less material than a full wrap but still follow the car's panel lines. The two long doors are not touched in a partial job unless the owner asks for them.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Maserati MCPura: body, cut-outs and film

The Maserati MCPura vinyl wrap is shaped by the car's two body styles, both with two long side doors. Each door is a large, uninterrupted panel, which makes the side of the car a clean area to cover. The car is 183.8 in (4,669 mm) long, so an installer works around a sports car footprint rather than a compact one. A coupe and a convertible differ most at the roof line, and that changes where film ends.

MCPura wrap ideas start with the two long side doors, each wrapped as one large piece of film. The convertible's fabric top is left unwrapped, and the film ends exactly where the top begins. If the car has a folding hard top, that top is wrapped as panels of its own. Other parts that need cut-outs or come off are handled the same way as on any modern sports car, with trim removed for a clean edge.

How much vinyl to wrap an MCPura depends on the body style, and this car has only one generation so far. For the first generation, the convertible uses about 44 ft (13.5 m) and the coupe uses up to 51 ft (15.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds waste and can bring the figure to about 59 ft (18 m). Anyone counting film should measure the car before cutting, because door length and roof details change the yield.

Questions about wrapping a Maserati MCPura

How much vinyl does it take to wrap a Maserati MCPura?

It takes about 44 ft (13.5 m) to wrap the convertible and up to 51 ft (15.5 m) to wrap the coupe of the first generation Maserati MCPura. The estimate is for 60-inch (1.52 m) cast film, and chrome or patterned film can require up to about 59 ft (18 m).

Is the top of an MCPura wrapped?

No, the fabric top of an MCPura convertible is not wrapped, and the film ends where the top begins. A folding hard top on this car is wrapped as panels of its own.

Which MCPura body takes more film?

The coupe body of the MCPura takes more film than the convertible, with up to 51 ft (15.5 m) compared to about 44 ft (13.5 m) for the convertible.

Can I wrap only the hood or the roof of an MCPura?

Yes, you can wrap only the hood or the roof of an MCPura, and a partial wrap can also cover the mirror caps. Chrome delete is another option, covering the window trim and badges with black film.