Wraps by car

Maserati Kyalami wrap

The Maserati Kyalami wrap page covers the single generation produced from 1976 to 1983. A full vinyl wrap of the coupe body takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. This length covers the complete exterior with one large piece per long side door. Chrome or patterned film raises the estimate to about 57 ft (17.5 m).

1generations15.5 mof film for a full wrap

Maserati Kyalami, first generation, factory photo
Maserati Kyalami, first generation. Factory color shown.

Maserati Kyalami wrap colors and ideas

  • Kyalami black wrap
  • Kyalami white wrap
  • Kyalami gray wrap
  • Kyalami silver wrap
  • Kyalami red wrap
  • Kyalami blue wrap
  • Kyalami green wrap
  • Kyalami yellow wrap
  • Kyalami orange wrap
  • Kyalami purple wrap
  • Kyalami pink wrap
  • Kyalami teal wrap
  • Kyalami brown wrap
  • Kyalami gold wrap
  • Kyalami chrome wrap
  • Kyalami color shift wrap
  • Kyalami carbon fiber wrap
  • Kyalami camo and patterned wrap

How much vinyl to wrap a Maserati Kyalami

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1976–1983coupe (2 doors)180.3 in (4,580 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)

Kyalami wrap cost factors

The Kyalami wrap cost is set by the single body style and the film type. The car needs about 51 ft (15.5 m) of standard film, while chrome or patterned film raises the amount to about 57 ft (17.5 m). Paint condition on a 1976–1983 car may require surface preparation before film is applied. The installer's time for cutting around the long doors and trim pieces also affects the final cost.

  • Film for a full wrap: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Kyalami wraps by generation

Swipe sideways. Tap a card for the full description.

Maserati Kyalami, first generation, factory photo
Factory color shown

1976–1983 Kyalami coupe (first generation)

1976–1983coupe (2 doors)180.3 in (4,580 mm)

The first generation Maserati Kyalami was built from 1976 to 1983 as a two-door coupe. Paint on this sports car may be original or repainted, so a test spot is needed before a full wrap. A test spot shows whether the film will adhere to the existing paint. This step prevents lifting or damage on older surfaces.

Two long side doors: each door is one large piece of film.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on a Kyalami

A partial wrap on the Maserati Kyalami can cover the roof, hood, or mirror caps with color change film. Kyalami chrome delete replaces bright window trim and badges with black film for a darker look. Paint protection film (PPF) can be applied as a clear layer on the front end to guard against chips. These jobs use less material than a full wrap and focus on specific areas.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Maserati Kyalami: body, cut-outs and film

The Maserati Kyalami vinyl wrap on this coupe is simplified by its two-door body measuring 180.3 in (4,580 mm) long. Each long side door is wrapped as one large piece of film, reducing seams. The extended hood and trunk lid create two more broad panels that consume film. Fewer doors mean less cutting around openings compared to a four-door car.

Kyalami wrap ideas begin with the long two-door shell, where each door is a single large piece of film. The window trim and badges can be covered with black film for a chrome delete, which removes bright metal from the body. The front bumper and lower panels benefit from clear paint protection film (PPF) if stone chips are a concern. The roof and hood work well as standalone color contrast areas.

To know how much vinyl to wrap a Kyalami, use the generation's shared coupe body. The 1976–1983 car needs about 51 ft (15.5 m) of standard 60-inch (1.52 m) cast film. A chrome or patterned wrap uses about 57 ft (17.5 m) because matching patterns adds waste. Any wrap of this car starts from those figures, since only one body style exists.

Questions about wrapping a Maserati Kyalami

How much vinyl does it take to wrap a Maserati Kyalami?

It takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film to wrap a Maserati Kyalami. That figure covers the full body of the only generation, the 1976–1983 coupe. With chrome or patterned film the requirement rises to about 57 ft (17.5 m).

Can I wrap only the hood or the roof of a Kyalami?

Yes, the hood or roof of a Kyalami can be wrapped on its own. A partial wrap covers one of these panels or the mirror caps without doing the whole car. This approach uses less film and still changes the look.

Is a Kyalami hard to wrap?

A Kyalami wrap adds work because the two long side doors are each one large piece of film. The car is 180.3 in (4,580 mm) long, so handling those panels takes care. The single coupe body has no complex rear doors, which helps the installer.

How many generations of the Kyalami does this page cover?

This page covers one generation of the Kyalami. The car was produced from 1976 to 1983 in a single coupe body. No other generations of this model exist in the catalog.