Wraps by car

Maserati Royale wrap

The Maserati Royale wrap page covers one generation of this luxury sedan produced from 1987 to 1990. A full vinyl wrap of the Royale takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film. Installing a color change wrap on this car protects the original paint and gives it a new look without a respray.

1generations16.5 mof film for a full wrap

Maserati Royale, first generation, factory photo
Maserati Royale, first generation. Factory color shown.

Maserati Royale wrap colors and ideas

  • Royale black wrap
  • Royale white wrap
  • Royale gray wrap
  • Royale silver wrap
  • Royale red wrap
  • Royale blue wrap
  • Royale green wrap
  • Royale yellow wrap
  • Royale orange wrap
  • Royale purple wrap
  • Royale pink wrap
  • Royale teal wrap
  • Royale brown wrap
  • Royale gold wrap
  • Royale chrome wrap
  • Royale color shift wrap
  • Royale carbon fiber wrap
  • Royale camo and patterned wrap

How much vinyl to wrap a Maserati Royale

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1987–1990sedan (4 doors)193.3 in (4,910 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)

Royale wrap cost factors

Royale wrap cost depends on the film finish, the condition of the paint, and the amount of cut‑out work on a 193.3 in (4,910 mm) sedan. A color change wrap on this car uses about 54 ft (16.5 m) of film, but chrome delete and extra trim removal add labor. Because only one generation exists, the main variable is how much correction the original paint needs before the wrap.

  • Film for a full wrap: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).
  • Body: sedan (4 doors).

Royale wraps by generation

Swipe sideways. Tap a card for the full description.

Maserati Royale, first generation, factory photo
Factory color shown

1987–1990 Royale sedan (first generation)

1987–1990sedan (4 doors)193.3 in (4,910 mm)

The first generation Maserati Royale, sold from 1987 to 1990, can have original or repainted panels. Before a full wrap, the installer tests a small area of film on the paint to check that the surface is stable. On a car of these years, every panel should be inspected, because old paint may lift when the film is repositioned.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on a Royale

Partial wrap options for the Maserati Royale include the roof, hood and mirror caps. A chrome delete on the window trim and badges is done with black film. Paint protection film (PPF) can also be applied to the front end as a clear guard.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Maserati Royale: body, cut-outs and film

A Maserati Royale vinyl wrap has to follow the lines of a four-door sedan body that is 193.3 in (4,910 mm) long. The long roof and rear pillars mean the installer lays film in large pieces so the finish stays clean at the doors. The flat sides of the Royale suit a full wrap, but the wrap shop has to trim the material carefully around every handle and light.

Royale wrap ideas include a satin or gloss color change, a two-tone roof, and a chrome delete on the bright window trim and badges. The door handles, side mirrors and badges come off so the film can be tucked behind them. The front and rear bumpers have deep recesses, so the installer inlays film into those areas instead of stretching one sheet over them.

Knowing how much vinyl to wrap a Royale starts with the one body style of this generation, the four-door sedan. A first-generation Royale is the only body listed here, so film estimates do not change between coupe or wagon shapes. If the car has chrome or a patterned film, order about 67 ft (20.5 m) of 60-inch (1.52 m) material for the full wrap.

Questions about wrapping a Maserati Royale

How much vinyl does it take to wrap a Maserati Royale?

A full wrap of a Maserati Royale takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film. That figure is for the newest body, the 1987–1990 sedan, and covers the painted panels without the trim.

Can I wrap only the hood or the roof of a Royale?

Yes, you can wrap only the hood or only the roof of a Royale. These are standard partial wrap jobs, along with the mirror caps and a chrome delete on the window trim and badges.

Is a Royale hard to wrap?

The Royale is not the easiest car to wrap because of its deep bumper recesses and the chrome trim that should be removed. The body is 193.3 in (4,910 mm) long, so the installer needs large, clean panels of film. Extra time goes into inlays and into cutting around the door handles and lights.

How many generations of the Royale does this page cover?

This page covers one generation of the Maserati Royale, produced from 1987 to 1990.