Wraps by car

Rover 100 wrap

The Rover 100 wrap page covers the 1994–2000 subcompact convertible and hatchback models. This catalog lists one generation of the Rover 100 and the film a full wrap of the newest body takes. A complete vinyl wrap uses about 38 ft (11.5 m) on the convertible or 41 ft (12.5 m) on the hatchback.

1generations11.5 mof film for a full wrap

Rover 100, first generation, factory photo
Rover 100, first generation. Factory color shown.

Rover 100 wrap colors and ideas

  • Rover 100 black wrap
  • Rover 100 white wrap
  • Rover 100 gray wrap
  • Rover 100 silver wrap
  • Rover 100 red wrap
  • Rover 100 blue wrap
  • Rover 100 green wrap
  • Rover 100 yellow wrap
  • Rover 100 orange wrap
  • Rover 100 purple wrap
  • Rover 100 pink wrap
  • Rover 100 teal wrap
  • Rover 100 brown wrap
  • Rover 100 gold wrap
  • Rover 100 chrome wrap
  • Rover 100 color shift wrap
  • Rover 100 carbon fiber wrap
  • Rover 100 camo and patterned wrap

How much vinyl to wrap a Rover 100

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1994–2000convertible, hatchback (2 or 3 or 5 doors)138.6 in (3,521 mm)about 38 ft (11.5 m) for the convertible to 41 ft (12.5 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 51 ft (15.5 m)

Rover 100 wrap cost factors

The Rover 100 wrap cost depends on the body style, the film chosen, and the amount of labor. A full wrap of the hatchback uses more film than the convertible, roughly 41 ft versus 38 ft. A chrome or patterned film adds material because it can take up to about 51 ft (15.5 m) for one car.

  • Film for a full wrap: about 38 ft (11.5 m) for the convertible to 41 ft (12.5 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 51 ft (15.5 m).
  • Body: convertible, hatchback (2 or 3 or 5 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Rover 100 wraps by generation

Swipe sideways. Tap a card for the full description.

Rover 100, first generation, factory photo
Factory color shown

1994–2000 Rover 100 convertible, hatchback (first generation)

1994–2000convertible, hatchback (2 or 3 or 5 doors)138.6 in (3,521 mm)

The first-generation Rover 100 is offered as a convertible or a two, three, or five-door hatchback. On the convertible the fabric top is not wrapped and the film ends where the top begins. When the car has a folding hard top, that top is wrapped as panels of its own.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 38 ft (11.5 m) for the convertible to 41 ft (12.5 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 51 ft (15.5 m).

Roof, hood, chrome delete and PPF on a Rover 100

A Rover 100 chrome delete covers the window trim and badges with black film. A partial wrap applies film to the roof, hood, or mirror caps only. Paint protection film (PPF) is clear film installed on the front end to shield the paint from stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Rover 100: body, cut-outs and film

The Rover 100 vinyl wrap follows body styles that measure 138.6 in (3,521 mm) from bumper to bumper. A two-door hatchback takes less film than a five-door because there are fewer door gaps and smaller door surfaces. The convertible body has a fabric top that is not wrapped, so the film ends where the top begins.

Rover 100 wrap ideas start with handling the tailgate, where the film ends at the edge of the rear glass. The convertible's fabric top is left uncovered and the film stops cleanly along its edge. With a folding hard top, the wrap is applied to the panels of that top as separate pieces.

To work out how much vinyl to wrap a Rover 100, compare the convertible with the hatchback styles. The hatchback body needs about 41 ft (12.5 m) of 60-inch (1.52 m) cast film for a full color change. The convertible uses less film because its fabric top is excluded from the wrap.

Questions about wrapping a Rover 100

How much vinyl does it take to wrap a Rover 100?

A Rover 100 wrap uses about 38 ft (11.5 m) of film on the convertible and 41 ft (12.5 m) on the hatchback. Those figures assume a full color change with 60-inch (1.52 m) cast film.

Is the top of a Rover 100 wrapped?

No, the fabric top of a Rover 100 convertible is not wrapped. The film ends where the fabric top begins. If the convertible has a folding hard top, that top is wrapped as panels of its own.

Which Rover 100 body takes more film?

The Rover 100 hatchback takes more film than the convertible. A full wrap of the hatchback is estimated at about 41 ft (12.5 m), while the convertible is about 38 ft (11.5 m). The difference comes from the convertible's fabric top being left uncovered.

Can I wrap only the hood or the roof of a Rover 100?

Yes, you can wrap only the hood or the roof of your Rover 100. A partial wrap can cover the roof, hood, or mirror caps separately. This is a smaller job than a full color change and uses less film.