Wraps by car

Rover 600 wrap

The Rover 600 wrap page covers the first generation sedan built from 1993 to 1999. A full vinyl wrap of this mid-size car takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. This page lists one generation and the film amounts for a complete color change.

1generations15.5 mof film for a full wrap

Rover 600, first generation, factory photo
Rover 600, first generation. Factory color shown.

Rover 600 wrap colors and ideas

  • Rover 600 black wrap
  • Rover 600 white wrap
  • Rover 600 gray wrap
  • Rover 600 silver wrap
  • Rover 600 red wrap
  • Rover 600 blue wrap
  • Rover 600 green wrap
  • Rover 600 yellow wrap
  • Rover 600 orange wrap
  • Rover 600 purple wrap
  • Rover 600 pink wrap
  • Rover 600 teal wrap
  • Rover 600 brown wrap
  • Rover 600 gold wrap
  • Rover 600 chrome wrap
  • Rover 600 color shift wrap
  • Rover 600 carbon fiber wrap
  • Rover 600 camo and patterned wrap

How much vinyl to wrap a Rover 600

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1993–1999sedan (4 doors)182.9 in (4,645 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)

Rover 600 wrap cost factors

The Rover 600 wrap cost depends on the size of the car, the film you pick, and the labor for cut-outs and bumper work. This sedan is 182.9 in (4,645 mm) long and uses about 51 ft (15.5 m) of cast film. A chrome or patterned film needs about 64 ft (19.5 m) and more time to lay straight.

  • Film for a full wrap: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).
  • Body: sedan (4 doors).

Rover 600 wraps by generation

Swipe sideways. Tap a card for the full description.

Rover 600, first generation, factory photo
Factory color shown

1993–1999 Rover 600 sedan (first generation)

1993–1999sedan (4 doors)182.9 in (4,645 mm)

The first generation Rover 600 was built from 1993 to 1999 as a four-door sedan. On a car of these years the paint may be original or repainted, and a test spot of film comes before a full wrap. A wrap installer checks the paint bond on every panel before committing to the whole body.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on a Rover 600

A partial wrap on a Rover 600 covers the roof, hood or mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film over the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Rover 600: body, cut-outs and film

The Rover 600 vinyl wrap is sized by the sedan body at 182.9 in (4,645 mm) long. Four doors and a standard trunk lid keep the panel count low for a mid-size car. The roof and hood are large flat areas that use film efficiently.

Rover 600 wrap ideas include cut-outs for door handles, mirrors, badges and the antenna base. The front and rear bumpers come off for a clean wrap around the edges. The side moldings and trim are taped off or removed before the film goes on.

How much vinyl to wrap a Rover 600 depends on the film you choose. One generation of this car is in the catalog, so the body length does not change between years. A plain color wrap needs about 51 ft (15.5 m) of 60-inch (1.52 m) film. Chrome or patterned film adds roughly 13 ft (4 m) to that amount.

Questions about wrapping a Rover 600

How much vinyl does it take to wrap a Rover 600?

A Rover 600 takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film for a full wrap. If you use chrome or patterned film, the amount rises to about 64 ft (19.5 m). The estimate is for the first generation sedan body.

Can I wrap only the hood or the roof of a Rover 600?

Yes, you can wrap only the hood or the roof of a Rover 600. Partial wrap jobs on this car include the roof, hood and mirror caps. A shop can also do a chrome delete on the window trim and badges.

Is a Rover 600 hard to wrap?

A Rover 600 is not the hardest car to wrap, but the bumpers and trim add work. The front and rear bumpers come off for a clean install, and the door handles, mirrors and badges need cut-outs. The sedan body is 182.9 in (4,645 mm) long, so a full wrap is a full-day job.

How many generations of the Rover 600 does this page cover?

This page covers one generation of the Rover 600. The first generation sedan was built from 1993 to 1999.