Wraps by car

Rover 25 wrap

This page covers the Rover 25 wrap in vinyl wrap film for the hatchback produced from 1999 to 2005. The Rover 25 has one generation in the catalog, and a full wrap of the newest body takes about 46 ft (14 m) of 60-inch (1.52 m) cast film. Chrome or patterned film increases the estimate to about 57 ft (17.5 m).

1generations14 mof film for a full wrap

Rover 25, first generation, factory photo
Rover 25, first generation. Factory color shown.

Rover 25 wrap colors and ideas

  • Rover 25 black wrap
  • Rover 25 white wrap
  • Rover 25 gray wrap
  • Rover 25 silver wrap
  • Rover 25 red wrap
  • Rover 25 blue wrap
  • Rover 25 green wrap
  • Rover 25 yellow wrap
  • Rover 25 orange wrap
  • Rover 25 purple wrap
  • Rover 25 pink wrap
  • Rover 25 teal wrap
  • Rover 25 brown wrap
  • Rover 25 gold wrap
  • Rover 25 chrome wrap
  • Rover 25 color shift wrap
  • Rover 25 carbon fiber wrap
  • Rover 25 camo and patterned wrap

How much vinyl to wrap a Rover 25

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1999–2005hatchback (3 or 5 doors)157.1 in (3,990 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)

Rover 25 wrap cost factors

Rover 25 wrap cost depends on the film type, the number of panels, and the labor for the tailgate and glass edge. A color change wrap on the whole car uses about 46 ft (14 m) of cast film, while chrome or patterned film uses about 57 ft (17.5 m). A partial wrap like the hood or roof uses less film and less labor.

  • Film for a full wrap: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).
  • Body: hatchback (3 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Rover 25 wraps by generation

Swipe sideways. Tap a card for the full description.

Rover 25, first generation, factory photo
Factory color shown

1999–2005 Rover 25 hatchback (first generation)

1999–2005hatchback (3 or 5 doors)157.1 in (3,990 mm)

The first generation Rover 25 from 1999 to 2005 may have original or repainted panels, so a test spot comes before a full wrap. Paint condition affects adhesion, and a repainted panel may need more prep work. The installer checks each panel before the film goes on.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on a Rover 25

A partial wrap on a Rover 25 can cover the roof, hood, or mirror caps. A Rover 25 chrome delete covers the window trim and badges with black film. Paint protection film (PPF) as a clear film on the front end keeps the bumper and hood from stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Rover 25: body, cut-outs and film

A Rover 25 vinyl wrap on the hatchback body has three or five doors, and the compact length of 157.1 in (3,990 mm) keeps film use moderate. The tailgate includes the rear glass, so the film ends at the edge of the glass. Panel shapes are simple, and the roof is flat enough for one piece of film.

Rover 25 wrap ideas often start with the tailgate and the rear glass, where the film edge must follow the glass line cleanly. The door handles, mirrors, and badges come off for a neat finish around the cut-outs. The front and rear bumpers stay on the car, and the film is tucked at the edges.

To find how much vinyl to wrap a Rover 25, use the same figures for every year of this generation, since the body did not change. A full wrap of any 1999 to 2005 Rover 25 takes about 46 ft (14 m) of 60-inch film, and chrome or patterned film takes about 57 ft (17.5 m). The three-door and five-door versions need the same amount of film.

Questions about wrapping a Rover 25

How much vinyl does it take to wrap a Rover 25?

It takes about 46 ft (14 m) of 60-inch (1.52 m) cast film to wrap a Rover 25. For chrome or patterned film, the estimate is about 57 ft (17.5 m). These figures cover a full wrap of the hatchback body from 1999 to 2005.

Can I wrap only the hood or the roof of a Rover 25?

Yes, you can wrap only the hood or the roof of a Rover 25 as a partial wrap. The roof, hood, and mirror caps are common partial wrap jobs on this car. A chrome delete on the window trim and badges is another smaller job.

Is a Rover 25 hard to wrap?

A Rover 25 is not hard to wrap, but the tailgate with the rear glass adds work because the film must end at the glass edge. The compact size of 157.1 in (3,990 mm) keeps the job manageable. The flat roof and simple panels help the installer.

How many generations of the Rover 25 does this page cover?

This page covers one generation of the Rover 25, the hatchback from 1999 to 2005. All body styles in the catalog belong to that single generation.