Wraps by car

Rover 14 wrap

The Rover 14 wrap page covers the first generation sedan produced from 1933 to 1948. A full vinyl wrap of this four-door body takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises the total to around 59 ft (18 m).

1generations15.5 mof film for a full wrap

Rover 14, first generation, factory photo
Rover 14, first generation. Factory color shown.

Rover 14 wrap colors and ideas

  • Rover 14 black wrap
  • Rover 14 white wrap
  • Rover 14 gray wrap
  • Rover 14 silver wrap
  • Rover 14 red wrap
  • Rover 14 blue wrap
  • Rover 14 green wrap
  • Rover 14 yellow wrap
  • Rover 14 orange wrap
  • Rover 14 purple wrap
  • Rover 14 pink wrap
  • Rover 14 teal wrap
  • Rover 14 brown wrap
  • Rover 14 gold wrap
  • Rover 14 chrome wrap
  • Rover 14 color shift wrap
  • Rover 14 carbon fiber wrap
  • Rover 14 camo and patterned wrap

How much vinyl to wrap a Rover 14

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1933–1948sedan (4 doors)165.0 in (4,191 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m)

Rover 14 wrap cost factors

Rover 14 wrap cost depends on the film footage, the amount of trim removal, and the condition of the paint. The standard wrap uses about 51 ft (15.5 m) of 60-inch (1.52 m) film, while chrome film needs 59 ft (18 m). Rust repair or paint correction before wrapping adds labor that is not part of a clean surface estimate.

  • Film for a full wrap: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).
  • Body: sedan (4 doors).

Rover 14 wraps by generation

Swipe sideways. Tap a card for the full description.

Rover 14, first generation, factory photo
Factory color shown

1933–1948 Rover 14 sedan (first generation)

1933–1948sedan (4 doors)165.0 in (4,191 mm)

The first generation Rover 14, built from 1933 to 1948, often arrives with original or repainted panels that affect vinyl adhesion. A test spot on each panel shows whether the paint can hold the film before a full wrap is started. Wrapping over weak paint risks lifting the clear coat when the film is repositioned.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).

Roof, hood, chrome delete and PPF on a Rover 14

Partial wrap on a Rover 14 covers the roof, hood, or mirror caps without wrapping the whole sedan. Chrome delete for this car means covering the window trim and badges with black film. Paint protection film (PPF) on the front end shields the grille, hood leading edge, and fenders from stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Rover 14: body, cut-outs and film

The Rover 14 vinyl wrap is sized for a four-door sedan body with a length of 165.0 in (4,191 mm). Its single body style keeps the wrap pattern straightforward, with no coupe or wagon variations to account for. The long hood and upright roof add surface area that must be measured carefully before cutting film.

Rover 14 wrap ideas include working around the bright window trim and door handles, which need careful trimming or removal. The separate fenders and running boards call for extra film and more seams than a modern unibody sedan. Removing the badges before wrapping gives a cleaner finish and avoids cut lines around emblems.

How much vinyl to wrap a Rover 14 depends on the film type: about 51 ft (15.5 m) for standard cast film and 59 ft (18 m) for chrome or patterned film. The figure assumes a full sedan wrap with no roof insert or two-tone split. This single-generation catalog page keeps the estimate the same for all production years.

Questions about wrapping a Rover 14

How much vinyl does it take to wrap a Rover 14?

Yes, a full wrap of a Rover 14 takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises the total to around 59 ft (18 m). These figures are for the four-door sedan body of the first generation.

Can I wrap only the hood or the roof of a Rover 14?

Yes, you can wrap only the hood or the roof of a Rover 14 as a partial job. Partial wrap options also include mirror caps, while chrome delete covers window trim and badges. Paint protection film on the front end is another smaller alternative to a full wrap.

Is a Rover 14 hard to wrap?

Yes, a Rover 14 is harder to wrap than a modern car because of its separate fenders and running boards. The long hood and upright roof add surface area that requires careful film handling. Paint age from 1933–1948 production also demands a test spot before wrapping.

How many generations of the Rover 14 does this page cover?

This page covers one generation of the Rover 14, the first generation produced from 1933 to 1948. The catalog lists only this generation because no later generations were produced. All film estimates on the page apply to that single sedan body.