Wraps by car

Rover 75 wrap

A Rover 75 wrap covers the full-size sedan or wagon built from 1998 to 2005. The single generation takes a full vinyl wrap of about 54 ft (16.5 m) on the sedan or 59 ft (18 m) on the wagon using 60-inch (1.52 m) cast film. Chrome or patterned film can require up to about 77 ft (23.5 m).

1generations16.5 mof film for a full wrap

Rover 75, first generation, factory photo
Rover 75, first generation. Factory color shown.

Rover 75 wrap colors and ideas

  • Rover 75 black wrap
  • Rover 75 white wrap
  • Rover 75 gray wrap
  • Rover 75 silver wrap
  • Rover 75 red wrap
  • Rover 75 blue wrap
  • Rover 75 green wrap
  • Rover 75 yellow wrap
  • Rover 75 orange wrap
  • Rover 75 purple wrap
  • Rover 75 pink wrap
  • Rover 75 teal wrap
  • Rover 75 brown wrap
  • Rover 75 gold wrap
  • Rover 75 chrome wrap
  • Rover 75 color shift wrap
  • Rover 75 carbon fiber wrap
  • Rover 75 camo and patterned wrap

How much vinyl to wrap a Rover 75

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1998–2005sedan, wagon (4 or 5 doors)186.2 in (4,730 mm) to 188.7 in (4,792 mm)about 54 ft (16.5 m) for the sedan to 59 ft (18 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 77 ft (23.5 m)

Rover 75 wrap cost factors

A Rover 75 wrap cost depends on the body style and the film chosen. The wagon has more surface area than the sedan, so it uses more film and more labor at 59 ft (18 m) versus 54 ft (16.5 m). Chrome or patterned film can push the total to about 77 ft (23.5 m) and adds material cost.

  • Film for a full wrap: about 54 ft (16.5 m) for the sedan to 59 ft (18 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 77 ft (23.5 m).
  • Body: sedan, wagon (4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Restyled in 2004: bumpers and lights differ between the versions, and so do the film cuts.

Rover 75 wraps by generation

Swipe sideways. Tap a card for the full description.

Rover 75, first generation, factory photo
Factory color shown

1998–2005 Rover 75 sedan, wagon (first generation)

1998–2005sedan, wagon (4 or 5 doors)186.2 in (4,730 mm) to 188.7 in (4,792 mm)

The first generation Rover 75 spans 1998 to 2005 with a restyling in 2004. The 2004 update changed the bumpers and lights, so film cut for an earlier car does not fit a later one. Owners counting film should confirm which front and rear design they have before ordering a kit.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 54 ft (16.5 m) for the sedan to 59 ft (18 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 77 ft (23.5 m).

Roof, hood, chrome delete and PPF on a Rover 75

A partial wrap on a Rover 75 can cover the roof, hood, or mirror caps. Chrome delete changes the bright window trim and badges to black film. Paint protection film (PPF) is a clear film applied to the front end for protection.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Rover 75: body, cut-outs and film

A Rover 75 vinyl wrap follows the long body lines of a full-size car with four or five doors. The sedan measures 186.2 in (4,730 mm) and the wagon stretches to 188.7 in (4,792 mm), so a wrap uses wide film and careful trimming. The long roof and tall rear pillars add surface area compared with a compact car.

Rover 75 wrap ideas include wrapping the tailgate with the rear glass set into it. The film ends cleanly at the edge of the glass, so the installer trims around the window and does not cover it. Door handles and side moldings come off for the cleanest finish.

How much vinyl to wrap a Rover 75 depends on the body style and the film finish. The sedan uses about 54 ft (16.5 m) and the wagon about 59 ft (18 m) with standard cast film. Chrome or patterned film raises the figure to about 77 ft (23.5 m) for either body.

Questions about wrapping a Rover 75

How much vinyl does it take to wrap a Rover 75?

A Rover 75 sedan takes about 54 ft (16.5 m) and the wagon about 59 ft (18 m) of 60-inch (1.52 m) cast film. Chrome or patterned film can require up to about 77 ft (23.5 m).

Which years of the Rover 75 take the same film cuts?

Rover 75s built from 1998 to 2003 share one set of film cuts, while 2004 to 2005 cars take cuts for the restyled bumpers and lights. Film cut for one front or rear design does not fit the other.

Which Rover 75 body takes more film?

The Rover 75 wagon takes more film than the sedan: about 59 ft (18 m) versus 54 ft (16.5 m). The wagon body is longer at 188.7 in (4,792 mm) and has more rear surface area.

Can I wrap only the hood or the roof of a Rover 75?

Yes, you can wrap only the hood or the roof of a Rover 75. Partial jobs also include mirror caps, chrome delete on window trim and badges, and clear paint protection film on the front end.