Wraps by car

Rover P6 wrap

This page covers the Rover P6, a mid-size sedan produced from 1963 to 1977. The catalog includes one generation. A full vinyl wrap of this body takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film.

1generations15.5 mof film for a full wrap

Rover P6, first generation, factory photo
Rover P6, first generation. Factory color shown.

Rover P6 wrap colors and ideas

  • Rover P6 black wrap
  • Rover P6 white wrap
  • Rover P6 gray wrap
  • Rover P6 silver wrap
  • Rover P6 red wrap
  • Rover P6 blue wrap
  • Rover P6 green wrap
  • Rover P6 yellow wrap
  • Rover P6 orange wrap
  • Rover P6 purple wrap
  • Rover P6 pink wrap
  • Rover P6 teal wrap
  • Rover P6 brown wrap
  • Rover P6 gold wrap
  • Rover P6 chrome wrap
  • Rover P6 color shift wrap
  • Rover P6 carbon fiber wrap
  • Rover P6 camo and patterned wrap

How much vinyl to wrap a Rover P6

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1963–1977sedan (4 doors)179.0 in (4,547 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)

Rover P6 wrap cost factors

Rover P6 wrap cost depends on the film chosen, the condition of the paint, and the amount of disassembly. The car requires about 51 ft (15.5 m) of cast film, so material volume affects the final price. A chrome delete or partial wrap uses less film and lowers cost.

  • Film for a full wrap: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).
  • Body: sedan (4 doors).

Rover P6 wraps by generation

Swipe sideways. Tap a card for the full description.

Rover P6, first generation, factory photo
Factory color shown

1963–1977 Rover P6 sedan (first generation)

1963–1977sedan (4 doors)179.0 in (4,547 mm)

This generation of the Rover P6 was built from 1963 to 1977 as a four-door sedan. Paint on these cars may be original or repainted, so a test spot is necessary before a full wrap. The installer checks adhesion on every panel to avoid lifting.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

Roof, hood, chrome delete and PPF on a Rover P6

Smaller jobs on a Rover P6 include a partial wrap of the roof, hood, or mirror caps. Chrome delete covers window trim and badges with black film. Paint protection film (PPF) can be applied to the front end as a clear shield.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Rover P6: body, cut-outs and film

The Rover P6 is a four-door sedan with a length of 179.0 in (4,547 mm). This mid-size body means a full wrap has moderate material needs. The straight panels and simple shape make film installation easier than on curved modern cars.

For a Rover P6 wrap, plan cut-outs for door handles, trim, and badges. The window trim and badges are good candidates for chrome delete with black film. Removing door handles gives a cleaner look but adds labor time.

The single generation of the Rover P6 ran from 1963 to 1977 with one body style. There are no major changes in dimensions to alter film quantities. Anyone counting film for a full wrap can use the same estimate for all years.

Questions about wrapping a Rover P6

How much vinyl does it take to wrap a Rover P6?

A Rover P6 full wrap takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film needs about 62 ft (19 m) due to pattern matching. This estimate covers the standard sedan body.

Can I wrap only the hood or the roof of a Rover P6?

Yes, you can wrap only the hood or the roof of a Rover P6. Partial wrap jobs are often done on the roof, hood, and mirror caps. These smaller areas use less film and reduce material cost.

Is a Rover P6 hard to wrap?

Yes, a Rover P6 has some hard-to-wrap areas due to its age and trim. The wrap installer must remove or cut around chrome trim and badges. The 179.0 in (4,547 mm) length means more seams or a two-person install.

How many generations of the Rover P6 does this page cover?

This page covers one generation of the Rover P6, from 1963 to 1977. The car had a single body style: a four-door sedan. All wrap estimates here are for that body.