Wraps by car

Rover 200 wrap

The Rover 200 wrap page covers three generations of this compact car, from 1984 to 2000. A full wrap of the newest body, the third generation hatchback, takes about 46 ft (14 m) of 60-inch (1.52 m) cast vinyl film. Chrome or patterned film for that body needs about 57 ft (17.5 m).

3generations14 mof film for a full wrap

Rover 200, third generation, factory photo
Rover 200, third generation. Factory color shown.

Rover 200 wrap colors and ideas

  • Rover 200 black wrap
  • Rover 200 white wrap
  • Rover 200 gray wrap
  • Rover 200 silver wrap
  • Rover 200 red wrap
  • Rover 200 blue wrap
  • Rover 200 green wrap
  • Rover 200 yellow wrap
  • Rover 200 orange wrap
  • Rover 200 purple wrap
  • Rover 200 pink wrap
  • Rover 200 teal wrap
  • Rover 200 brown wrap
  • Rover 200 gold wrap
  • Rover 200 chrome wrap
  • Rover 200 color shift wrap
  • Rover 200 carbon fiber wrap
  • Rover 200 camo and patterned wrap

How much vinyl to wrap a Rover 200

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1995–2000hatchback (3 or 5 doors)156.4 in (3,973 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)
1989–1995convertible, coupe, hatchback (2 or 3 or 5 doors)166.1 in (4,220 mm) to 168.1 in (4,270 mm)about 44 ft (13.5 m) for the convertible to 49 ft (15 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 61 ft (18.5 m)
1984–1989sedan (4 doors)163.6 in (4,156 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)

Rover 200 wrap cost factors

The Rover 200 wrap cost depends on the body style, the film type and the condition of the paint. A second generation convertible takes less film than a hatchback, but the top area adds care and time. Chrome or patterned film needs up to about 61 ft (18.5 m), while standard cast film needs less. Paint correction before wrapping can add work to any Rover 200.

  • Film for a full wrap: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).
  • Body: hatchback (3 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Rover 200 wraps by generation

Swipe sideways. Tap a card for the full description.

Rover 200, third generation, factory photo
Factory color shown

1995–2000 Rover 200 hatchback (third generation)

1995–2000hatchback (3 or 5 doors)156.4 in (3,973 mm)

The third generation Rover 200 was built from 1995 to 2000 as a hatchback with three or five doors. Its body is 156.4 in (3,973 mm) long, so a full wrap takes about 46 ft (14 m) of 60-inch (1.52 m) cast film. The tailgate has the rear glass in it, and the film ends at the edge of the glass. Paint age on a car of these years means a test spot goes on before a full wrap.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Rover 200, second generation, factory photo
Factory color shown

1989–1995 Rover 200 convertible, coupe, hatchback (second generation)

1989–1995convertible, coupe, hatchback (2 or 3 or 5 doors)166.1 in (4,220 mm) to 168.1 in (4,270 mm)

The second generation Rover 200 was built from 1989 to 1995 as a convertible, coupe or hatchback with two, three or five doors. Its length runs from 166.1 in (4,220 mm) to 168.1 in (4,270 mm), and film use runs from about 44 ft (13.5 m) for the convertible to 49 ft (15 m) for the hatchback. A fabric top is not wrapped and the film ends where it begins, while a folding hard top is wrapped as panels of its own. The tailgate on hatchback models has the rear glass in it, so film ends at the edge of the glass.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 44 ft (13.5 m) for the convertible to 49 ft (15 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 61 ft (18.5 m).

Rover 200, first generation, factory photo
Factory color shown

1984–1989 Rover 200 sedan (first generation)

1984–1989sedan (4 doors)163.6 in (4,156 mm)

The first generation Rover 200 was built from 1984 to 1989 as a four-door sedan. At 163.6 in (4,156 mm) long, it needs about 46 ft (14 m) of 60-inch (1.52 m) cast film for a full wrap. The sedan body has a separate trunk lid, so the rear panel count is lower than on a hatchback. Fewer cut-outs for glass edges save time on this generation.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on a Rover 200

A partial wrap on a Rover 200 can cover the roof, hood or mirror caps. Chrome delete covers window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Rover 200: body, cut-outs and film

The Rover 200 vinyl wrap job depends on body style and size. The third generation hatchback spans 156.4 in (3,973 mm), while second generation models range from 166.1 in (4,220 mm) to 168.1 in (4,270 mm). Smaller bodies need less film, but every panel still has to be cut and finished by hand.

Rover 200 wrap ideas include planning for cut-outs and removable parts. On the third generation and second generation hatchbacks, the tailgate has the rear glass in it, so the film ends at the edge of the glass. On the second generation convertible, a fabric top is not wrapped and the film ends where it begins, while a folding hard top is wrapped as panels of its own. Badges, door handles and trim pieces come off before the film goes on.

To work out how much vinyl to wrap a Rover 200, start with the generation. The first generation sedan is 163.6 in (4,156 mm) long and needs about 46 ft (14 m) of 60-inch (1.52 m) cast film. The second generation offers more body styles, and film use ranges from about 44 ft (13.5 m) for the convertible to 49 ft (15 m) for the hatchback. The third generation hatchback returns to about 46 ft (14 m).

Questions about wrapping a Rover 200

How much vinyl does it take to wrap a Rover 200?

A full wrap of a Rover 200 takes about 46 ft (14 m) of 60-inch (1.52 m) cast vinyl film. This figure is for the third generation hatchback, the newest body. Chrome or patterned film needs about 57 ft (17.5 m). Older generations take similar amounts.

Can I wrap only the hood or the roof of a Rover 200?

Yes, you can wrap only the hood or the roof of a Rover 200. A partial wrap can cover the roof, hood or mirror caps. Chrome delete covers window trim and badges. Paint protection film is another option for the front end.

Is a Rover 200 hard to wrap?

A Rover 200 is not hard to wrap, but a few parts add work. The tailgate on hatchback models has the rear glass in it, so the film ends at the edge of the glass. The second generation convertible has a fabric top that is not wrapped and a folding hard top wrapped as panels of its own. The body lengths range from 156.4 in (3,973 mm) to 168.1 in (4,270 mm), so film use varies by style.

How many generations of the Rover 200 does this page cover?

This page covers three generations of the Rover 200. The first generation was built from 1984 to 1989, the second from 1989 to 1995, and the third from 1995 to 2000.