Wraps by car

Rover Metro wrap

The Rover Metro wrap page covers the 1987–1994 first generation, the only generation in this catalog. A full vinyl wrap of the newest Metro body takes about 38 ft (11.5 m) for the convertible to 41 ft (12.5 m) for the hatchback. The film used is 60-inch (1.52 m) cast film.

1generations11.5 mof film for a full wrap

Rover Metro, first generation, factory photo
Rover Metro, first generation. Factory color shown.

Rover Metro wrap colors and ideas

  • Metro black wrap
  • Metro white wrap
  • Metro gray wrap
  • Metro silver wrap
  • Metro red wrap
  • Metro blue wrap
  • Metro green wrap
  • Metro yellow wrap
  • Metro orange wrap
  • Metro purple wrap
  • Metro pink wrap
  • Metro teal wrap
  • Metro brown wrap
  • Metro gold wrap
  • Metro chrome wrap
  • Metro color shift wrap
  • Metro carbon fiber wrap
  • Metro camo and patterned wrap

How much vinyl to wrap a Rover Metro

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1987–1994convertible, hatchback (2 or 3 or 5 doors)138.6 in (3,521 mm)about 38 ft (11.5 m) for the convertible to 41 ft (12.5 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 51 ft (15.5 m)

Metro wrap cost factors

Metro wrap cost depends on the film area of the chosen body style, with the convertible at about 38 ft (11.5 m) and the hatchback at about 41 ft (12.5 m). The type of film and the amount of chrome delete or paint protection film added also change the total. A 138.6 in (3,521 mm) subcompact like the Rover Metro keeps the wrap area small, so the film quantity is the main variable.

  • Film for a full wrap: about 38 ft (11.5 m) for the convertible to 41 ft (12.5 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 51 ft (15.5 m).
  • Body: convertible, hatchback (2 or 3 or 5 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Metro wraps by generation

Swipe sideways. Tap a card for the full description.

Rover Metro, first generation, factory photo
Factory color shown

1987–1994 Metro convertible, hatchback (first generation)

1987–1994convertible, hatchback (2 or 3 or 5 doors)138.6 in (3,521 mm)

The first generation Rover Metro includes a convertible body with a fabric top that is not wrapped. On that open top the film ends where the fabric begins, leaving the top unwrapped. A folding hard top, when present, is wrapped as panels of its own with the film cut to each panel.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 38 ft (11.5 m) for the convertible to 41 ft (12.5 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 51 ft (15.5 m).

Roof, hood, chrome delete and PPF on a Metro

A partial wrap on a Rover Metro can cover the roof, hood or mirror caps without the full body. Metro chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard the paint from stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Rover Metro: body, cut-outs and film

A Rover Metro vinyl wrap follows the small subcompact body and its simple boxy lines. The convertible and hatchback styles are both about 138.6 in (3,521 mm) long, so the film estimate stays close between them. Fewer doors and the fabric top reduce the painted area on the convertible compared with the hatchback.

On a Metro wrap, the fabric top is not covered and the film ends where the top begins. A folding hard top is wrapped as separate panels of its own, with seams at the panel edges. The tailgate includes the rear glass, so the film stops at the edge of the glass and no cut-out is needed.

For someone counting film, how much vinyl to wrap a Metro depends mainly on the body style. The convertible needs about 38 ft (11.5 m) of 60-inch (1.52 m) cast film, while the hatchback needs about 41 ft (12.5 m). Chrome or patterned film adds up to about 51 ft (15.5 m) on this car.

Questions about wrapping a Rover Metro

How much vinyl does it take to wrap a Rover Metro?

It takes about 38 ft (11.5 m) to 41 ft (12.5 m) of 60-inch (1.52 m) cast film to wrap a Rover Metro, depending on the body. The convertible uses about 38 ft (11.5 m) and the hatchback about 41 ft (12.5 m).

Is the top of a Metro wrapped?

No, the fabric top of a Metro is not wrapped. The vinyl film ends where the fabric top begins, leaving the top uncovered.

Which Metro body takes more film?

The hatchback Metro takes more film than the convertible. The convertible needs about 38 ft (11.5 m) of film, while the hatchback needs about 41 ft (12.5 m).

Can I wrap only the hood or the roof of a Metro?

Yes, you can wrap only the hood or the roof of a Metro as a partial wrap. Other partial jobs include the mirror caps, a chrome delete on the window trim and badges, and paint protection film on the front end.