Wraps by car

Rover 800 wrap

The Rover 800 wrap is a full vinyl wrap for the mid-size Rover 800, produced from 1986 to 1999. This catalog covers the first generation, which includes coupe, hatchback, and sedan body styles. A full wrap of the newest body takes about 52 ft (16 m) for the coupe to 54 ft (16.5 m) for the hatchback, using 60-inch (1.52 m) cast film.

1generations16 mof film for a full wrap

Rover 800, first generation, factory photo
Rover 800, first generation. Factory color shown.

Rover 800 wrap colors and ideas

  • Rover 800 black wrap
  • Rover 800 white wrap
  • Rover 800 gray wrap
  • Rover 800 silver wrap
  • Rover 800 red wrap
  • Rover 800 blue wrap
  • Rover 800 green wrap
  • Rover 800 yellow wrap
  • Rover 800 orange wrap
  • Rover 800 purple wrap
  • Rover 800 pink wrap
  • Rover 800 teal wrap
  • Rover 800 brown wrap
  • Rover 800 gold wrap
  • Rover 800 chrome wrap
  • Rover 800 color shift wrap
  • Rover 800 carbon fiber wrap
  • Rover 800 camo and patterned wrap

How much vinyl to wrap a Rover 800

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1986–1999coupe, hatchback, sedan (2 or 4 or 5 doors)192.1 in (4,880 mm)about 52 ft (16 m) for the coupe to 54 ft (16.5 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 67 ft (20.5 m)

Rover 800 wrap cost factors

The Rover 800 wrap cost depends on the body style, the film type, and how much of the car you cover. A coupe takes about 52 ft (16 m) and a hatchback takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film, so the larger panels add labor time. Chrome or patterned film can increase the material amount to about 67 ft (20.5 m) because of the extra cutting and alignment.

  • Film for a full wrap: about 52 ft (16 m) for the coupe to 54 ft (16.5 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 67 ft (20.5 m).
  • Body: coupe, hatchback, sedan (2 or 4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Rover 800 wraps by generation

Swipe sideways. Tap a card for the full description.

Rover 800, first generation, factory photo
Factory color shown

1986–1999 Rover 800 coupe, hatchback, sedan (first generation)

1986–1999coupe, hatchback, sedan (2 or 4 or 5 doors)192.1 in (4,880 mm)

The first generation Rover 800 from 1986 to 1999 comes in coupe, hatchback, and sedan styles, and the style decides the panel plan and the film amount. The hatchback needs the most film because of the tailgate, while the coupe has longer doors that add wrapping time. The sedan is similar to the hatchback in size but has a separate trunk lid. All three styles are mid-size and use the same 60-inch (1.52 m) film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 52 ft (16 m) for the coupe to 54 ft (16.5 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on a Rover 800

A partial wrap on a Rover 800 can cover the roof, hood, or mirror caps for a smaller change. A chrome delete covers the window trim and badges with black film, which works well on the chrome details of this car. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These jobs use less film than a full wrap and can be done on any body style.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Rover 800: body, cut-outs and film

A Rover 800 vinyl wrap changes with the body style because the coupe, hatchback, and sedan have different panel shapes and sizes. The car measures 192.1 in (4,880 mm) long, so a full wrap covers a large area and takes a full roll of film. The hatchback has a tailgate with the rear glass in it, which means the film ends at the edge of the glass. The sedan has a separate trunk lid, and the coupe has longer doors, so each style needs its own panel plan.

Rover 800 wrap ideas often start with the tailgate, because the film ends at the edge of the rear glass and the glass itself stays uncovered. The door handles, badges, and trim need to be removed or cut around carefully, especially on the hatchback where the tailgate is one large panel. The mirror caps can be wrapped separately if you want a two-tone look. Keeping the edges clean around the glass and the lights is the main detail on this car.

If you are counting how much vinyl to wrap a Rover 800, the hatchback uses about 54 ft (16.5 m) and the coupe uses about 52 ft (16 m) with 60-inch (1.52 m) film. The sedan falls between those figures, so the body style is the main difference between these cars. There is only one generation in this catalog, so the film amount does not change over the years. The mid-size body means you will use nearly a full roll for any style.

Questions about wrapping a Rover 800

How much vinyl does it take to wrap a Rover 800?

A Rover 800 needs about 52 ft (16 m) for the coupe and 54 ft (16.5 m) for the hatchback using 60-inch (1.52 m) cast film. The sedan is similar to the hatchback, and patterned or chrome film takes up to about 67 ft (20.5 m). Always buy a little extra for mistakes and trimming.

Which Rover 800 body takes more film?

The hatchback takes more film than the coupe because its tailgate is a single large panel that needs about 54 ft (16.5 m) compared to the coupe's 52 ft (16 m). The sedan falls between them, so the hatchback has the largest wrapped surface of the three styles.

Can I wrap only the hood or the roof of a Rover 800?

Yes, you can wrap only the hood or the roof of a Rover 800 as a partial wrap. Mirror caps and chrome delete on the window trim and badges are also separate jobs. Paint protection film on the front end is another way to cover less than the full car.

Is a Rover 800 hard to wrap?

A Rover 800 is not especially hard to wrap, but the tailgate with the rear glass in it adds work because the film must end cleanly at the glass edge. The car is mid-size at 192.1 in (4,880 mm) long, so the large panels need care to avoid wrinkles. The coupe's longer doors and the hatchback's tailgate are the main challenges.