Wraps by car

Rover 45 wrap

A Rover 45 wrap changes the look of this mid-size car with a full vinyl wrap in one of the model's single generation, built from 1999 to 2005. The newest body of the Rover 45 takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film, or about 62 ft (19 m) if you choose a chrome or patterned film.

1generations15.5 mof film for a full wrap

Rover 45, first generation, factory photo
Rover 45, first generation. Factory color shown.

Rover 45 wrap colors and ideas

  • Rover 45 black wrap
  • Rover 45 white wrap
  • Rover 45 gray wrap
  • Rover 45 silver wrap
  • Rover 45 red wrap
  • Rover 45 blue wrap
  • Rover 45 green wrap
  • Rover 45 yellow wrap
  • Rover 45 orange wrap
  • Rover 45 purple wrap
  • Rover 45 pink wrap
  • Rover 45 teal wrap
  • Rover 45 brown wrap
  • Rover 45 gold wrap
  • Rover 45 chrome wrap
  • Rover 45 color shift wrap
  • Rover 45 carbon fiber wrap
  • Rover 45 camo and patterned wrap

How much vinyl to wrap a Rover 45

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1999–2005hatchback, sedan (4 or 5 doors)172.7 in (4,386 mm) to 178.7 in (4,540 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)

Rover 45 wrap cost factors

A Rover 45 wrap cost depends on the body style, the film type and the amount of disassembly the installer does. The hatchback and sedan bodies have different panel plans, so the time to wrap the tailgate or the trunk changes the labor. A chrome or patterned film needs about 62 ft (19 m) of film, which is more than the 51 ft (15.5 m) for a solid cast film. Removing the bumpers, door handles and badges for a clean wrap adds time to the job.

  • Film for a full wrap: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).
  • Body: hatchback, sedan (4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Rover 45 wraps by generation

Swipe sideways. Tap a card for the full description.

Rover 45, first generation, factory photo
Factory color shown

1999–2005 Rover 45 hatchback, sedan (first generation)

1999–2005hatchback, sedan (4 or 5 doors)172.7 in (4,386 mm) to 178.7 in (4,540 mm)

The first generation Rover 45, made from 1999 to 2005, comes as a hatchback or a sedan with four or five doors. The body style decides the panel plan and the film amount, because the hatchback tailgate is one large panel with the glass in it. The sedan has a separate trunk lid and a fixed rear window, so the wrap is cut differently around the glass. For a full wrap, the hatchback and sedan use close to 51 ft (15.5 m) of 60-inch (1.52 m) cast film, with a chrome or patterned film needing about 62 ft (19 m).

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

Roof, hood, chrome delete and PPF on a Rover 45

On a Rover 45, a partial wrap covers the roof, the hood or the mirror caps with vinyl film. A chrome delete covers the window trim and the badges with black film, which gives the bright trim a darker look. Paint protection film (PPF) is a clear film applied to the front end to protect the paint from stone chips and scratches.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Rover 45: body, cut-outs and film

A Rover 45 vinyl wrap covers the hatchback or sedan body, which measures 172.7 in (4,386 mm) to 178.7 in (4,540 mm) long. The body style sets the panel plan, so a hatchback wrap uses the tailgate as one large panel with the rear glass in it. A sedan wrap has a separate trunk lid and a fixed rear window, which changes how the film is cut around the glass. The extra length of the sedan body means a few more square feet of film than the hatchback.

Rover 45 wrap ideas start with the tailgate, where the film ends at the edge of the rear glass because the glass is part of the tailgate. The door handles, badges and antenna come off for a clean install, and the mirrors are wrapped with the doors closed. The front and rear bumpers are wrapped off the car to reach the edges cleanly. The fuel filler door is cut out so the wrap does not cover the hinge.

To work out how much vinyl to wrap a Rover 45, measure the body panels, because the hatchback and sedan have different panel plans. The film amount for a full wrap of the newest body is about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. A chrome or patterned film needs about 62 ft (19 m), since the pattern must be matched at the seams. The single generation from 1999 to 2005 keeps the same body shapes, so the panel plan does not change between years.

Questions about wrapping a Rover 45

How much vinyl does it take to wrap a Rover 45?

It takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film to wrap a Rover 45. If you use a chrome or patterned film, the amount is about 62 ft (19 m) because the pattern must be matched.

Which Rover 45 body takes more film?

The sedan takes more film than the hatchback because the sedan body is longer, at 178.7 in (4,540 mm) against 172.7 in (4,386 mm) for the hatchback. The sedan also has a separate trunk lid and a fixed rear window, which adds a few more panels to cover.

Can I wrap only the hood or the roof of a Rover 45?

Yes, you can wrap only the hood or the roof of a Rover 45. A partial wrap on these panels is a smaller job than a full wrap, and you can also wrap the mirror caps to match.

Is a Rover 45 hard to wrap?

A Rover 45 is not the easiest car to wrap because the rear glass is part of the tailgate, so the film must end exactly at the edge of the glass. The sedan body is 178.7 in (4,540 mm) long, which means more panels and seams than a smaller car. The door handles, badges and bumpers also need to come off for a clean wrap.