Wraps by car

Ferrari 166 wrap

The Ferrari 166 wrap page covers the single-generation sports car built from 1948 to 1949. A vinyl wrap changes the color and protects the paint of the two-door convertible or coupe. The newest body in this catalog needs about 39 ft (12 m) of 60-inch (1.52 m) cast film for a full wrap.

1generations12 mof film for a full wrap

Ferrari 166, first generation, factory photo
Ferrari 166, first generation. Factory color shown.

Ferrari 166 wrap colors and ideas

  • Ferrari 166 black wrap
  • Ferrari 166 white wrap
  • Ferrari 166 gray wrap
  • Ferrari 166 silver wrap
  • Ferrari 166 red wrap
  • Ferrari 166 blue wrap
  • Ferrari 166 green wrap
  • Ferrari 166 yellow wrap
  • Ferrari 166 orange wrap
  • Ferrari 166 purple wrap
  • Ferrari 166 pink wrap
  • Ferrari 166 teal wrap
  • Ferrari 166 brown wrap
  • Ferrari 166 gold wrap
  • Ferrari 166 chrome wrap
  • Ferrari 166 color shift wrap
  • Ferrari 166 carbon fiber wrap
  • Ferrari 166 camo and patterned wrap

How much vinyl to wrap a Ferrari 166

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1948–1949convertible, coupe (2 doors)142.0 in (3,607 mm)about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 46 ft (14 m)

Ferrari 166 wrap cost factors

A Ferrari 166 wrap cost depends on the size of the body, the film finish, and whether any trim is removed. The short 142.0 in (3,607 mm) body and two long side doors set the amount of film needed. A chrome or patterned film adds material because the pattern has to be matched, taking about 46 ft (14 m) in total.

  • Film for a full wrap: about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 46 ft (14 m).
  • Body: convertible, coupe (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • Two long side doors: each door is one large piece of film.

Ferrari 166 wraps by generation

Swipe sideways. Tap a card for the full description.

Ferrari 166, first generation, factory photo
Factory color shown

1948–1949 Ferrari 166 convertible, coupe (first generation)

1948–1949convertible, coupe (2 doors)142.0 in (3,607 mm)

The first generation Ferrari 166 from 1948 to 1949 has a convertible top that is not part of the main vinyl wrap. On a fabric top, the film ends where the top begins, leaving the fabric uncovered. A folding hard top is wrapped as panels of its own, following their individual shapes.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Film: about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 46 ft (14 m).

Roof, hood, chrome delete and PPF on a Ferrari 166

A Ferrari 166 chrome delete covers the bright window trim and badges with black film instead of wrapping the whole car. A partial wrap can be limited to the roof, hood, or mirror caps. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Ferrari 166: body, cut-outs and film

A Ferrari 166 vinyl wrap has to follow the short 142.0 in (3,607 mm) body of this early sports car. The convertible and coupe share most panels, so the film estimate is the same for either style. The two long side doors mean each side takes a large unbroken piece of film.

Ferrari 166 wrap ideas begin with the two long side doors, which are wrapped as one large piece each. The convertible top, whether fabric or folding hard panels, is either left uncovered or wrapped as separate sections. Installers cut around the side windows and any trim that stays on the car.

To work out how much vinyl to wrap a Ferrari 166 you only need the first generation, offered from 1948 to 1949. The film estimate stays the same for the convertible and the coupe because their body shells share their main dimensions. A color change calls for about 39 ft (12 m) of 60-inch (1.52 m) cast film.

Questions about wrapping a Ferrari 166

How much vinyl does it take to wrap a Ferrari 166?

A Ferrari 166 needs about 39 ft (12 m) of 60-inch (1.52 m) cast film for a full vinyl wrap. The estimate comes from the newest body in the catalog, which is the first generation from 1948 to 1949. If you choose a chrome or patterned film, plan for about 46 ft (14 m) to match the pattern.

Is the top of a Ferrari 166 wrapped?

No, the fabric top of a Ferrari 166 is not wrapped with vinyl. The film ends where the top begins, leaving the fabric exposed. A folding hard top is wrapped as separate panels, but the soft top is never covered.

Which Ferrari 166 body takes more film?

A Ferrari 166 convertible with a folding hard top takes more film than the same car with a fabric top. The coupe and the fabric-top convertible share the same basic estimate, but the hard top adds wrapped panels of its own. In the catalog the two body styles have one film estimate, so the extra panels are on top of that.

Can I wrap only the hood or the roof of a Ferrari 166?

Yes, you can wrap only the hood or the roof of a Ferrari 166 as a partial wrap. A partial job often includes the roof, hood, or mirror caps. Paint protection film is another option, applied as clear film on the front end.