Wraps by car

Ferrari Purosangue wrap

A Ferrari Purosangue wrap uses about 57 ft (17.5 m) of 60-inch (1.52 m) cast film for a full vinyl wrap. The Purosangue is Ferrari's first SUV, produced from 2022 to the present, and this catalog covers its single generation. The five-door body has a length of 195.8 in (4,973 mm), which influences film usage. Chrome or patterned film requires more material, about 66 ft (20 m).

1generations17.5 mof film for a full wrap

Ferrari Purosangue, first generation, factory photo
Ferrari Purosangue, first generation. Factory color shown.

Ferrari Purosangue wrap colors and ideas

  • Purosangue black wrap
  • Purosangue white wrap
  • Purosangue gray wrap
  • Purosangue silver wrap
  • Purosangue red wrap
  • Purosangue blue wrap
  • Purosangue green wrap
  • Purosangue yellow wrap
  • Purosangue orange wrap
  • Purosangue purple wrap
  • Purosangue pink wrap
  • Purosangue teal wrap
  • Purosangue brown wrap
  • Purosangue gold wrap
  • Purosangue chrome wrap
  • Purosangue color shift wrap
  • Purosangue carbon fiber wrap
  • Purosangue camo and patterned wrap

How much vinyl to wrap a Ferrari Purosangue

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2022–nowSUV (5 doors)195.8 in (4,973 mm)about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)

Purosangue wrap cost factors

Purosangue wrap cost depends on the size of the vehicle, the film type, and the amount of labor for the detailed areas. The SUV body requires about 57 ft (17.5 m) of standard cast film, or about 66 ft (20 m) of chrome or patterned film. The length of 195.8 in (4,973 mm) means more material than a smaller car. Additional work includes cutting around parking sensors and cameras and wrapping the rear spoiler separately.

  • Film for a full wrap: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.
  • Every trim has a rear spoiler: it is wrapped as a piece of its own.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.

Purosangue wraps by generation

Swipe sideways. Tap a card for the full description.

Ferrari Purosangue, first generation, factory photo
Factory color shown

2022–now Purosangue SUV (first generation)

2022–nowSUV (5 doors)195.8 in (4,973 mm)

The first generation Purosangue, produced from 2022 to the present, has a panoramic glass roof on every trim. The glass roof is not wrapped, so the roof stays dark whatever the color of the film. This means the roof area does not require vinyl, reducing the total film needed. The film ends at the roof rails, leaving the glass exposed.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Every trim has a rear spoiler: it is wrapped as a piece of its own.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Film: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Roof, hood, chrome delete and PPF on a Purosangue

A partial wrap on a Ferrari Purosangue can cover the hood, mirror caps, tailgate, or rear spoiler individually. A chrome delete involves covering the window trim and badges with black film. Paint protection film (PPF) can be applied as a clear film on the front end to guard against stone chips. These smaller jobs allow for customization without a full wrap.

  • Partial wrap: hood, mirror caps, tailgate, rear spoiler.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Ferrari Purosangue: body, cut-outs and film

A Ferrari Purosangue vinyl wrap must cover a large SUV body with five doors and a length of 195.8 in (4,973 mm). The tailgate includes the rear glass, so the film stops at the edge of the glass rather than wrapping onto it. The roof is mostly glass on every trim, which reduces the amount of film needed for the roof area. The rear spoiler is wrapped separately, which adds a small amount of film but simplifies installation.

Purosangue wrap ideas should account for several parts that need special handling. The panoramic glass roof is not wrapped, so the film ends at the roof rails on every trim. Parking sensors in the bumpers require the film to be cut around each sensor to keep them functional. Cameras in the body also need cut-outs around each lens. The rear spoiler is wrapped as a separate piece.

To determine how much vinyl to wrap a Purosangue, note that there is only one generation in this catalog, produced from 2022 onward. The body style has not changed during this period, so the film estimate remains the same for all years. The length of 195.8 in (4,973 mm) is consistent across the generation. A full wrap uses about 57 ft (17.5 m) of 60-inch (1.52 m) cast film.

Questions about wrapping a Ferrari Purosangue

How much vinyl does it take to wrap a Ferrari Purosangue?

It takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film to wrap a Ferrari Purosangue fully. For chrome or patterned film, the estimate increases to about 66 ft (20 m) due to additional material needed for matching patterns. These figures apply to the first generation SUV, which has a length of 195.8 in (4,973 mm).

Can the roof of a Purosangue be wrapped?

No, the roof of a Purosangue cannot be wrapped because every trim has a panoramic glass roof. The glass is not wrapped, so the film ends at the roof rails. The roof area remains dark glass regardless of the wrap color chosen for the body.

Can I wrap only the hood or the roof of a Purosangue?

Yes, you can wrap only the hood or the roof of a Purosangue as a partial job. However, the roof is glass on every trim, so wrapping the roof is not possible; instead, options include the hood, mirror caps, tailgate, or rear spoiler. A chrome delete on window trim and badges is another partial option. Paint protection film on the front end is also available.

Is a Purosangue hard to wrap?

Yes, a Purosangue is somewhat hard to wrap because of its large size and special features. The body is 195.8 in (4,973 mm) long, which means more film and careful handling. Installers must cut around parking sensors in the bumpers and cameras in the body. The rear spoiler is wrapped as a separate piece, and the tailgate edge follows the rear glass line.