Wraps by car

Ferrari Daytona SP3 wrap

A Ferrari Daytona SP3 wrap calls for about 44 ft (13.5 m) of 60-inch (1.52 m) cast vinyl. The Daytona SP3 is a targa sports car built from 2021 onward. This single-generation model measures 184.5 in (4,686 mm) in length. The page covers the full vinyl wrap process and the film amounts involved.

1generations13.5 mof film for a full wrap

Ferrari Daytona SP3, first generation, factory photo
Ferrari Daytona SP3, first generation. Factory color shown.

Ferrari Daytona SP3 wrap colors and ideas

  • Daytona SP3 black wrap
  • Daytona SP3 white wrap
  • Daytona SP3 gray wrap
  • Daytona SP3 silver wrap
  • Daytona SP3 red wrap
  • Daytona SP3 blue wrap
  • Daytona SP3 green wrap
  • Daytona SP3 yellow wrap
  • Daytona SP3 orange wrap
  • Daytona SP3 purple wrap
  • Daytona SP3 pink wrap
  • Daytona SP3 teal wrap
  • Daytona SP3 brown wrap
  • Daytona SP3 gold wrap
  • Daytona SP3 chrome wrap
  • Daytona SP3 color shift wrap
  • Daytona SP3 carbon fiber wrap
  • Daytona SP3 camo and patterned wrap

How much vinyl to wrap a Ferrari Daytona SP3

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2021–nowtarga (2 doors)184.5 in (4,686 mm)about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)

Daytona SP3 wrap cost factors

Daytona SP3 wrap cost depends on the size of the car and the film type chosen. The body needs about 44 ft (13.5 m) of standard cast film. A chrome or patterned wrap takes around 57 ft (17.5 m). Extra work on the open top and the many cut-outs also affects the final cost.

  • Film for a full wrap: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).
  • Body: targa (2 doors).
  • Targa body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Daytona SP3 wraps by generation

Swipe sideways. Tap a card for the full description.

Ferrari Daytona SP3, first generation, factory photo
Factory color shown

2021–now Daytona SP3 targa (first generation)

2021–nowtarga (2 doors)184.5 in (4,686 mm)

The open top of the first generation Daytona SP3 is not wrapped. The fabric section remains uncovered, and the vinyl ends cleanly at its edges. This keeps the targa look intact while protecting the painted parts. For a folding hard top, each panel would be wrapped separately.

Targa body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on a Daytona SP3

A partial wrap on a Daytona SP3 covers the hood, mirror caps, or rear deck. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is applied as clear film on the front end. These options use less film than a full body wrap.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Ferrari Daytona SP3: body, cut-outs and film

The Ferrari Daytona SP3 vinyl wrap follows the two-door targa body style. Its 184.5 in (4,686 mm) length makes it a compact but detailed sports car to cover. The open top means the fabric panel is left unwrapped. Film for the rest of the body runs around 44 ft (13.5 m).

Daytona SP3 wrap ideas include covering the rear deck and the lower sills. The targa roof is not wrapped because the film stops where the fabric section begins. The front bumper and side intakes need careful cut-outs. The side mirrors are removed for a cleaner wrap edge.

How much vinyl to wrap a Daytona SP3 stays consistent because there is one generation only. The 2021–now targa uses roughly 44 ft (13.5 m) of 60-inch cast film. Chrome or patterned film takes about 57 ft (17.5 m) due to extra material. The same film counts apply across all production years.

Questions about wrapping a Ferrari Daytona SP3

How much vinyl does it take to wrap a Ferrari Daytona SP3?

It takes about 44 ft (13.5 m) of 60-inch (1.52 m) cast vinyl to wrap a Ferrari Daytona SP3. If you use chrome or patterned film, the amount goes up to 57 ft (17.5 m). These figures are for the first generation body built from 2021 onward.

Is the top of a Daytona SP3 wrapped?

No, the top of a Daytona SP3 is not wrapped. The targa body has a fabric top that remains uncovered. The vinyl ends where the fabric section begins. A folding hard top would be wrapped as separate panels, but this car uses a fabric panel.

Can I wrap only the hood or the roof of a Daytona SP3?

Yes, you can wrap only the hood or the rear deck of a Daytona SP3. A partial wrap can also cover the mirror caps or a combination of these parts. A chrome delete covers the window trim and badges with black film. Clear paint protection film is also an option for the front end.

Is a Daytona SP3 hard to wrap?

Yes, a Daytona SP3 is harder to wrap than a closed coupe. The targa body has a fabric top that must be left uncovered, so the film edges need extra care. The car measures 184.5 in (4,686 mm), and its many intakes and curves call for patient cutting. The side mirrors and other parts come off to keep the wrap clean.