Wraps by car

Ferrari 612 wrap

This page covers the Ferrari 612 wrap and the vinyl wrap options for this two-door coupe. The Ferrari 612 was produced for one generation, from 2004 to 2011. A full wrap of the body takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises the total to about 67 ft (20.5 m).

1generations16.5 mof film for a full wrap

Ferrari 612, first generation, factory photo
Ferrari 612, first generation. Factory color shown.

Ferrari 612 wrap colors and ideas

  • Ferrari 612 black wrap
  • Ferrari 612 white wrap
  • Ferrari 612 gray wrap
  • Ferrari 612 silver wrap
  • Ferrari 612 red wrap
  • Ferrari 612 blue wrap
  • Ferrari 612 green wrap
  • Ferrari 612 yellow wrap
  • Ferrari 612 orange wrap
  • Ferrari 612 purple wrap
  • Ferrari 612 pink wrap
  • Ferrari 612 teal wrap
  • Ferrari 612 brown wrap
  • Ferrari 612 gold wrap
  • Ferrari 612 chrome wrap
  • Ferrari 612 color shift wrap
  • Ferrari 612 carbon fiber wrap
  • Ferrari 612 camo and patterned wrap

How much vinyl to wrap a Ferrari 612

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2004–2011coupe (2 doors)193.0 in (4,902 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)

Ferrari 612 wrap cost factors

A Ferrari 612 wrap cost is driven mainly by the film amount and the size of this large coupe. The full body needs about 54 ft (16.5 m) of 60-inch cast film, or about 67 ft (20.5 m) for chrome or patterned film. Labor changes with the complexity of the panels and any removal of parts. A partial job like a roof or hood wrap needs less film and less time.

  • Film for a full wrap: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Ferrari 612 wraps by generation

Swipe sideways. Tap a card for the full description.

Ferrari 612, first generation, factory photo
Factory color shown

2004–2011 Ferrari 612 coupe (first generation)

2004–2011coupe (2 doors)193.0 in (4,902 mm)

The first and only generation of the Ferrari 612 ran from 2004 to 2011 as a two-door coupe. Paint age on a car of these years can vary, and panels may be original or repainted, so a test spot comes before a full wrap. The body is 193.0 in (4,902 mm) long and takes about 54 ft (16.5 m) of film. Installers check the paint condition before committing to a full color change.

Two long side doors: each door is one large piece of film.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on a Ferrari 612

Owners of this Ferrari 612 can choose a partial wrap for the roof, hood, or mirror caps instead of a full color change. A chrome delete covers the window trim and badges with black film for a cleaner look. Paint protection film (PPF) is another option, with clear film applied to the front end to guard against stone chips. Each job uses less material than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Ferrari 612: body, cut-outs and film

A Ferrari 612 vinyl wrap starts with the car's single coupe body style and its 193.0 in (4,902 mm) length. This full-size two-door shape means large, smooth panels that suit a clean color change. The size also makes material planning important, since a full wrap uses about 54 ft (16.5 m) of film. Installers often quote extra film for the long roof and rear quarters.

Ferrari 612 wrap ideas can include details around the two long side doors, each of which is one large piece of film. The long door panels give a nearly uninterrupted surface for graphics or solid color. Around the glass, trims and badges need careful cutting or removal. Door handles and mirrors are also wrapped or removed for clean edges.

Anyone counting how much vinyl to wrap a Ferrari 612 will find only one generation to compare, from 2004 to 2011. The body dimensions stay consistent for the whole production run. A full wrap uses about 54 ft (16.5 m) of 60-inch cast film. If the film has chrome or a pattern, plan for about 67 ft (20.5 m).

Questions about wrapping a Ferrari 612

How much vinyl does it take to wrap a Ferrari 612?

A Ferrari 612 needs about 54 ft (16.5 m) of 60-inch (1.52 m) cast film for a full wrap. For chrome or patterned film, add about 20%: around 67 ft (20.5 m). The 2004–2011 coupe body is the only one to plan for.

Can I wrap only the hood or the roof of a Ferrari 612?

Yes, you can wrap only the hood or the roof of a Ferrari 612. A partial wrap can also cover just the mirror caps, or you can add a chrome delete on the window trim and badges. Paint protection film on the front end is another small-job option.

Is a Ferrari 612 hard to wrap?

A Ferrari 612 is not especially hard to wrap, but its size and door length add work. Each of the two long side doors is one large piece of film, which needs careful handling. The 193.0 in (4,902 mm) body also makes moving around the car slower.

How many generations of the Ferrari 612 does this page cover?

This page covers one generation of the Ferrari 612, produced from 2004 to 2011. The car was built only as a two-door coupe in that span.