Wraps by car

Ferrari 599 wrap

The Ferrari 599 wrap page covers the single generation produced from 2006 to 2012 in coupe and targa body styles. A full vinyl wrap of the newest body takes about 48 ft (14.5 m) for the targa to 51 ft (15.5 m) for the coupe using 60-inch (1.52 m) cast film.

1generations15.5 mof film for a full wrap

Ferrari 599, first generation, factory photo
Ferrari 599, first generation. Factory color shown.

Ferrari 599 wrap colors and ideas

  • Ferrari 599 black wrap
  • Ferrari 599 white wrap
  • Ferrari 599 gray wrap
  • Ferrari 599 silver wrap
  • Ferrari 599 red wrap
  • Ferrari 599 blue wrap
  • Ferrari 599 green wrap
  • Ferrari 599 yellow wrap
  • Ferrari 599 orange wrap
  • Ferrari 599 purple wrap
  • Ferrari 599 pink wrap
  • Ferrari 599 teal wrap
  • Ferrari 599 brown wrap
  • Ferrari 599 gold wrap
  • Ferrari 599 chrome wrap
  • Ferrari 599 color shift wrap
  • Ferrari 599 carbon fiber wrap
  • Ferrari 599 camo and patterned wrap

How much vinyl to wrap a Ferrari 599

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2006–2012coupe, targa (2 doors)183.7 in (4,665 mm)about 48 ft (14.5 m) for the targa to 51 ft (15.5 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 64 ft (19.5 m)

Ferrari 599 wrap cost factors

The Ferrari 599 wrap cost is set by the amount of film from the body size, the film type, and the labor for a two-door sports car with long doors. The coupe uses up to 51 ft (15.5 m) and the targa about 48 ft (14.5 m), while chrome or patterned film can push the total to about 64 ft (19.5 m). Removing and reinstalling trim pieces also adds to the work.

  • Film for a full wrap: about 48 ft (14.5 m) for the targa to 51 ft (15.5 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 64 ft (19.5 m).
  • Body: coupe, targa (2 doors).
  • Targa body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • Two long side doors: each door is one large piece of film.

Ferrari 599 wraps by generation

Swipe sideways. Tap a card for the full description.

Ferrari 599, first generation, factory photo
Factory color shown

2006–2012 Ferrari 599 coupe, targa (first generation)

2006–2012coupe, targa (2 doors)183.7 in (4,665 mm)

The Ferrari 599 targa has an open top that is not wrapped when it is fabric, and the vinyl ends where the top meets the body. If the targa has a folding hard top, that top is wrapped as its own panels, matching the body lines. This keeps the moving parts working without trapping film.

Targa body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Film: about 48 ft (14.5 m) for the targa to 51 ft (15.5 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on a Ferrari 599

A partial wrap on a Ferrari 599 covers the roof, hood, or mirror caps instead of the whole body. A chrome delete changes the window trim and badges from bright to black film. Paint protection film (PPF) is a clear option for the front end only.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Ferrari 599: body, cut-outs and film

The Ferrari 599 vinyl wrap is shaped by its long 183.7 in (4,665 mm) body and two large doors, so film is cut in big pieces. A two-door sports car like this has fewer seams than a four-door, which keeps the wrap cleaner. The coupe needs slightly more vinyl because of its fixed roof panels.

Ferrari 599 wrap ideas start with the long side doors, each covered by one large piece of film without a seam. The targa body has either a fabric top that stays unwrapped with film ending at its edge, or a folding hard top wrapped as separate panels. Badges and door handles are removed and reinstalled for a smooth finish.

How much vinyl to wrap a Ferrari 599 depends on the body style, with the coupe needing up to 51 ft (15.5 m) and the targa about 48 ft (14.5 m) of 60-inch (1.52 m) film. Chrome or patterned film adds waste, so the estimate rises to about 64 ft (19.5 m). The single generation from 2006 to 2012 keeps the same dimensions across those years.

Questions about wrapping a Ferrari 599

How much vinyl does it take to wrap a Ferrari 599?

It takes about 48 ft (14.5 m) for a targa to 51 ft (15.5 m) for a coupe of 60-inch (1.52 m) cast vinyl to wrap a Ferrari 599. Chrome or patterned film requires up to about 64 ft (19.5 m) because of extra waste.

Is the top of a Ferrari 599 wrapped?

No, a fabric top on a Ferrari 599 targa is not wrapped, and the film ends where the top begins. A folding hard top is wrapped as separate panels so the mechanism still works.

Which Ferrari 599 body takes more film?

The coupe takes more film than the targa, up to 51 ft (15.5 m) versus about 48 ft (14.5 m) of 60-inch (1.52 m) cast vinyl. The fixed roof on the coupe adds that extra area.

Can I wrap only the hood or the roof of a Ferrari 599?

Yes, you can wrap only the hood or the roof of a Ferrari 599 as a partial wrap. Mirror caps are another smaller job, or you can choose a chrome delete for the window trim and badges.