Wraps by car

Ferrari 296 GTB wrap

The Ferrari 296 GTB wrap page covers the single generation of this sports car produced since 2021. A full vinyl wrap of the newest 2021–now coupe body takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises the amount to about 57 ft (17.5 m).

1generations15.5 mof film for a full wrap

Ferrari 296 GTB, first generation, factory photo
Ferrari 296 GTB, first generation. Factory color shown.

Ferrari 296 GTB wrap colors and ideas

  • Ferrari 296 GTB black wrap
  • Ferrari 296 GTB white wrap
  • Ferrari 296 GTB gray wrap
  • Ferrari 296 GTB silver wrap
  • Ferrari 296 GTB red wrap
  • Ferrari 296 GTB blue wrap
  • Ferrari 296 GTB green wrap
  • Ferrari 296 GTB yellow wrap
  • Ferrari 296 GTB orange wrap
  • Ferrari 296 GTB purple wrap
  • Ferrari 296 GTB pink wrap
  • Ferrari 296 GTB teal wrap
  • Ferrari 296 GTB brown wrap
  • Ferrari 296 GTB gold wrap
  • Ferrari 296 GTB chrome wrap
  • Ferrari 296 GTB color shift wrap
  • Ferrari 296 GTB carbon fiber wrap
  • Ferrari 296 GTB camo and patterned wrap

How much vinyl to wrap a Ferrari 296 GTB

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2021–nowcoupe (2 doors)179.7 in (4,565 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)

Ferrari 296 GTB wrap cost factors

Ferrari 296 GTB wrap cost depends on the size of the coupe at 179.7 in (4,565 mm) long and the film amount of about 51 ft (15.5 m) of 60-inch cast film. The two long doors reduce panel count and seam work. Cut-outs around parking sensors, cameras, and the charge port door add labor. A chrome or patterned film uses about 57 ft (17.5 m) and affects material cost.

  • Film for a full wrap: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.

Ferrari 296 GTB wraps by generation

Swipe sideways. Tap a card for the full description.

Ferrari 296 GTB, first generation, factory photo
Factory color shown

2021–now Ferrari 296 GTB coupe (first generation)

2021–nowcoupe (2 doors)179.7 in (4,565 mm)

The first generation Ferrari 296 GTB is a coupe that is 179.7 in (4,565 mm) long and in production from 2021 to now. It has two long side doors that each install as one piece, cutting down the number of panels. A full wrap needs about 51 ft (15.5 m) of 60-inch cast film, or about 57 ft (17.5 m) for chrome or patterned film.

Two long side doors: each door is one large piece of film.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on a Ferrari 296 GTB

On a Ferrari 296 GTB, a partial wrap can cover the roof, hood, or mirror caps. A chrome delete covers the window trim and badges with black film instead of bright trim. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Ferrari 296 GTB: body, cut-outs and film

A Ferrari 296 GTB vinyl wrap covers one coupe body style that is 179.7 in (4,565 mm) long. Two long side doors each become one large piece of film, which reduces the number of seams. The single body style means film estimates stay the same across the catalog.

Ferrari 296 GTB wrap ideas start with the long doors that install as one large piece each. Every trim has parking sensors in the bumpers, so the film is cut around each sensor. Cameras in the body also need a cut-out around each lens. Plug-in and electric versions have a charge port door wrapped as a small piece of its own.

How much vinyl to wrap a Ferrari 296 GTB stays constant because the page lists one generation produced from 2021 to now. The coupe length is 179.7 in (4,565 mm), and a full wrap uses about 51 ft (15.5 m) of 60-inch film. There are no other generations to compare, so film counting starts and ends with this body.

Questions about wrapping a Ferrari 296 GTB

How much vinyl does it take to wrap a Ferrari 296 GTB?

Yes, a Ferrari 296 GTB takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film for a full wrap. Chrome or patterned film requires about 57 ft (17.5 m) of the same width.

Can I wrap only the hood or the roof of a Ferrari 296 GTB?

Yes, you can wrap only the hood or the roof of a Ferrari 296 GTB. These panels are part of the partial wrap options that also include the mirror caps.

Is a Ferrari 296 GTB hard to wrap?

Yes, a Ferrari 296 GTB is hard to wrap because every trim has parking sensors and cameras that need film cut around each sensor and lens. The charge port door on plug-in and electric versions is another small piece to wrap. The two long side doors are large single panels that take care to install without wrinkles.

How many generations of the Ferrari 296 GTB does this page cover?

This page covers one generation of the Ferrari 296 GTB, which has been in production from 2021 to now.